Tissue Engineering

No abstract text is available yet for this article.

The field of tissue engineering is developing rapidly. Given its ultimate importance to clinical care, the time is appropriate to assess the field's strategic directions to optimize research and development activities. To characterize strategic directions in tissue engineering, a distant but reachable clinical goal was proposed and a worldwide body of 24 leaders in tissue engineering was queried systematically to determine the best paths toward that goal. Using a modified Hoshin process, we identified 14 critical activity categories and then stratified them by their immediate priority for the field...

In vivo vascularization of implanted (bio)artificial constructs is essential for their proper function. Vascularization may rely on sprouting angiogenesis, vascular incorporation of bone marrow-derived endothelial cells (BMDECs), or both. Here we investigated the relative contribution of these 2 mechanisms to neovascularization in a mouse model of a foreign body reaction (FBR) to subcutaneously implanted Dacron and in hind limb ischemia (HLI) in relation to the molecular microenvironment at these neovascularization sites...

No abstract text is available yet for this article.

The success of therapeutic strategies within the fields of regenerative medicine, including tissue engineering, biomaterials engineering, and cell and tissue transplantation science, relies on researchers' understanding of the complex cellular microenvironments that occur within functional tissue. Microfabricated biomedical platforms provide tools for researchers to study cellular response to various stimuli with micro- and nanoscale spatial control. Initial studies utilizing relatively passive means of microenvironmental control have provided the fundamental knowledge required to begin to design microculture platforms that closely mimic these biological systems...

To develop biomaterials for tissue engineering, a silk-like protein inspired by mussel-adhesive proteins (MAPs) was designed and prepared. The primary structure of this silk-like protein is designed as TS[AKPSYPPTYKAS (GAGAGS)(3)](10) by combining the sequences (GAGAGS)(3), the crystalline region of Bombyx mori silk fibroin, and AKPSYPPTYK, the adhesive sequence of MAP from Mytilus edulis. This protein was synthesized by the genetic engineering method. Solid-state (13)C NMR spectra showed that this silk-like protein adopts flexible conformation due to introduction of the sequence AKPSYPPTYK...

Vacuum-assisted closure (VAC) negative pressure wound therapy (NPWT) is a highly successful and widely used treatment modality for wound healing, although no apparatus exists to monitor the effects of subatmospheric pressure application in vitro. Such an apparatus is desirable to better understand the biological effects of this therapy and potentially improve upon them. This article describes the development and validation of a novel bioreactor that permits such study. Tissue analogues consisting of 3-dimensional fibroblast-containing fibrin clots were cultured in off-the-shelf disposable cell culture inserts and multi-well plates that were integrated into the bioreactor module...

Embryonic stem cell (ESC) culture is fragmented and laborious and involves operator decisions. Most protocols consist of 3 individual steps: maintenance, embryoid body (EB) formation, and differentiation. Integration will assist automation, ultimately aiding scale-up to clinically relevant numbers. These problems were addressed by encapsulating undifferentiated murine ESCs (mESCs) in 1.1% (w/v) low-viscosity alginic acid, 0.1% (v/v) porcine gelatin hydrogel beads (d = 2.3 mm). Six hundred beads containing 10,000 mESCs per bead were cultured in a 50-mL high-aspect-ratio vessel bioreactor...

An ideal biomaterial for urethral reconstruction has not been developed. To create a urethral graft biomaterial with optimal biodegradability and biocompatibility, a copoly(L-lactide/epsilon-caprolactone) [P(LA/CL)] fabric tube was combined with a type I collagen sponge. The P(LA/CL) fibers were knitted into a vascular stent style (Type 1) or weaved into a mesh style (Type 2) to prepare P(LA/CL) tubes. The tubes were dipped in aqueous collagen solution and lyophilyzed to prepare the P(LA/CL)-collagen sponge graft...

A cell carrier made from synthetic material supporting selective growth of keratinocytes is a promising approach to avoid the phenomenon of fibroblast overgrowth during in vitro culture of skin substitutes. Therefore, we investigated polymer membranes made of polyacrylonitrile and copolymers of acrylonitrile and N-vinylpyrrolidone (NVP) for their ability to support selectively the growth of keratinocytes. It was found that a copolymer with an NVP-content of 30% (NVP30) supports growth of human keratinocyte cell line (HaCaT) cells and inhibits fibroblast growth under serum-containing conditions...

The goal of this study was the development of a bioartificial nerve guide to induce axonal regeneration in the peripheral nervous system (PNS). In this in vitro study, the ability of a novel, 3-dimensional (3D), highly oriented, cross-linked porcine collagen scaffold to promote directed axonal growth has been studied. Collagen nerve guides with longitudinal guidance channels were manufactured using a series of chemical and mechanical treatments with a patented unidirectional freezing process, followed by freeze-drying (pore sizes 20-50 microm)...

It has been proven that mesenchymal stromal cells (MSCs) can differentiate into tenocytes. Attempts to repair tendon lesions have been performed, mainly using scaffold carriers in experimental settings. In this article, we describe the clinical use of undifferentiated MSCs in racehorses. Significant clinical recovery was achieved in 9 of 11 horses evaluated using ultrasound analysis and their ability to return to racing. Our results show that the suspension of a small number of undifferentiated MSCs may be sufficient to repair damaged tendons without the use of scaffold support...

Cartilage is an avascular tissue, and chondrocytes in vivo experience a severely hypoxic environment. Using a defined in vitro model of early chondrogenesis, we attempted to enrich for cells with an enhanced ability for chondrogenic differentiation by pre-exposure of mouse adipose-derived adult stromal cells (ADASs) to a hypoxic (2% oxygen) environment. ADASs were subsequently expanded in 2% or 21% oxygen environments, resulting in 2 groups of cells, and then early chondrogenic differentiation was induced at 21% oxygen tension using a 3-dimensional micromass culture system...

Beta (beta)-cell replacement represents an attractive approach for the possible cure of type 1 insulin-dependent diabetes mellitus (IDDM). In a search for potential sources of insulin-secreting cells for IDDM substitution therapy, we have focused on the neonatal pig liver, which is putatively enriched in multipotent stem cells. We then isolated cells measuring 10 to 15 microm in diameter, identified as small cells, characterized by a high proliferation rate and positive staining for immature liver and pancreatic endocrine cell markers (i...

The primary objective of this study was to evaluate epicardial transplantation of an intact microvascular network for treatment of myocardial ischemia in a murine model of acute myocardial infarction. We describe transplantation of an intact microvascular network constructed from isolated microvascular segments stabilized in a 3-dimensional matrix to the epicardial surface after acute myocardial infarction. This microvascular graft was implanted as a patch on the epicardium of mice after left coronary artery ligation...

Changes in dimensional and mechanical properties of degradable sheaths in poly lactic-co glycolic acid (PLGA) have been researched extensively. Composite PLGA having variable resorption rates in multiple layers under physiological loading has not been reported. Our novel design of a PLGA sheath is composed of 3 layers with different degradation rates (i.e., the innermost layer degrades the fastest, followed by the middle, while the outer layer degrades the slowest). In the presence of physiological luminal pressure, diameter is greater, thickness is less, resorption rate is greater, pore size is greater, and incremental modulus is greater than in nonpressurized sheaths...

Vascularization is critical to the survival of engineered tissues. This study combined biophysical and bioactive approaches to induce neovascularization in vivo. Further, we tested the effects of engineered vascularization on adipose tissue grafts. Hydrogel cylinders were fabricated from poly(ethylene glycol) diacrylate (PEG) in four configurations: PEG alone, PEG with basic fibroblast growth factor (bFGF), microchanneled PEG, or both bFGF-adsorbed and microchanneled PEG. In vivo implantation revealed no neovascularization in PEG, but substantial angiogenesis in bFGF-adsorbed and/or microchanneled PEG...

There is a clinical need for new bone replacement materials that combine long implant life with complete integration and appropriate mechanical properties. We have used human mesenchymal stem cells (MSCs) to populate porous apatite-wollastonite (A-W) glass-ceramic scaffolds produced by the layer manufacturing technique, selective laser sintering, to create custom-built bone replacements. Confocal and scanning electron microscopy were used to determine optimal seeding densities and to demonstrate that MSCs adhered and retained viability on the surface of A-W scaffolds over a culture period of 21 days...

Tissue engineering using a combination of biomaterials and cells represents a new approach to nerve repair. We have investigated the effect that extracellular matrix (ECM) molecules have on Schwann cell (SC) attachment and proliferation on the nerve conduit material poly-3-hydroxybutyrate (PHB), and SC influence on neurite outgrowth in vitro. Initial SC attachment to PHB mats was unaffected by ECM molecules but proliferation increased (laminin > fibronectin > collagen). SCs seeded onto ECM-coated culture inserts suspended above a monolayer of NG108-15 cells determined the effect of released diffusible factors...

Shaped cartilage grafts can be used in the restoration of injured joints and the reconstruction of deformities of the head and neck. This study describes a novel method for altering cartilage shape, based on the hypothesis that mechanical loading coupled with in vitro tissue growth and remodeling facilitates tissue reshaping. Static bending deformations were imposed on strips of immature articular cartilage, and retention of the imposed shape and structural and biochemical measures of growth were assessed after 2, 4, and 6 days of incubation...