Extraction and Characterization of Cellulose from Broccoli Stems as a New Biopolymer Source for Producing Carboxymethyl Cellulose Films.

The use of food and agricultural waste-derived carboxymethyl cellulose (CMC) has become of interest due to their biodegradability and cost-effectiveness. In the current research, cellulose was extracted from broccoli stems to produce carboxymethyl cellulose using a carboxymethylation reaction via chloroacetic acid (CAA) and sodium hydroxide (5-10 M). The effects of different synthesis conditions on the degree of substitution (DS) and viscosity of the synthesized CMC powder were investigated. The mechanical properties, water vapor permeability (WVP), and colour of CMC films were also evaluated. The results showed that CMC with the highest DS value (0.60) and the highest viscosity of 0.5 Pa·s could be synthesized from broccoli stems at a concentration of 7.5 M NaOH and a cellulose-to-chloroacetic acid ratio of 1 : 1.2. At CMC concentration of 4 g/100 mL with 0.8 g/100 mL of glycerol, the films had the highest tensile strength (31.91 MPa), whereas with 1.2 g/100 mL glycerol, more flexible films with elongation at break of 27.56% were produced. CMC films with the highest WVP (7.87 × 103  gm2 ·mmHg-1 /day) were made with 6 g/100 mL of CMC and 1.8 g/100 mL of glycerol. This research proposes a new source of cellulose to produce biodegradable packaging materials to initiate a practical basis for food waste reuse.