PMMA

Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) is successfully performed in water in the presence of a poly(methacrylic acid) (PMAA) macromolecular chain transfer agent (macroCTA) leading to the formation of self-stabilized PMAA-b-PMMA amphiphilic block copolymer particles. At pH = 3.7, the reactions are well-controlled with narrow molar mass distributions. Increasing the initial pH, particularly above 5.6, results in a partial loss of reactivity of the PMAA macroCTA...

PURPOSE: The purpose of this in vitro study was to investigate the fracture resistance, surface hardness, and color stain of 3D printed, CAD-CAM milled, and conventional interim materials. MATERIALS AND METHODS: A total of 80 specimens were fabricated from auto polymerizing polymethyl methacrylate (PMMA), bis-acryl composite resin, CAD-CAM polymethyl methacrylate resin (milled), and 3D printed composite resin (printed) (n = 20). Forty of them were crown-shaped, on which fracture strength test was performed (n = 10)...

Transition-metal dichalcogenides (TMDCs), as emerging optoelectronic materials, necessitate the establishment of an experimentally viable system to study their interaction with light. In this study, we propose and analyze a WS2 /PMMA/Ag planar Fabry-Perot (F-P) cavity, enabling the direct experimental measurement of WS2 absorbance. By optimizing the structure, the absorbance of A exciton of WS2 up to 0.546 can be experimentally achieved, which matches well with the theoretical calculations. Through temperature and thermal expansion strain induced by temperature, the absorbance of the A exciton can be tuned in situ...

For sodium batteries, the development of gel polymer electrolytes (GPEs) with remarkable electrochemical properties is in its early stage and persists to be a challenge. In this report we have synthesized a series of GPEs containing a poly(vinyllidene fluoride- co -hexafluoropropylene) (PVdF-HFP) and poly (methyl methacrylate) (PMMA) as blend polymer, sodium perchlorate (NaClO4 ) as ion-conducting salt and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM-BF4 ) and tetra ethylene glycol dimethyl ether (TEGDME) as molecular solvents...

BACKGROUND: In aesthetic practice, delayed-onset (late) inflammatory reactions (DIRs) to dermal fillers are encountered. The treatment of DIRs can be challenging, with a response to established therapies, including oral antibiotics, intralesional and oral steroids, and hyaluronidase injection, occasionally reported as unsatisfactory. OBJECTIVES: Evaluate the efficacy of low-dose oral methotrexate (MTX) therapy in treating recalcitrant DIRs. METHODS: We retrospectively reviewed cases of recalcitrant DIRs treated with oral MTX...

Membrane technology has revolutionized various fields with its energy efficiency, versatility, user-friendliness, and adaptability. This study introduces a microfluidic chip, comprised of silicone rubber and polymethylmethacrylate (PMMA) sheets to explore the impacts of polymeric support morphology on electro-membrane extraction efficiency, representing a pioneering exploration in this field. In this research, three polyvinylidenefluoride (PVDF) membranes with distinct pore sizes were fabricated and their characteristics were assessed through field-emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM)...

This review evaluates the decision-making framework for using antibiotic-loaded cement (ALC) in the management of prosthetic joint infection (PJI). Drawing on available literature, we offer orthopaedic surgeons a guided discussion on several critical considerations. First, we explore the impact of antibiotic-loading on the mechanical properties of polymethylmethacrylate (PMMA) cement, assessing both strength and durability. We then explore the optimal antibiotic dosage to load into cement, aiming to achieve effective local concentrations for infection control without compromising mechanical stability...

Diabetes-related skin ulcers are of significant clinical concern. Although conventional dressings have been developed, their outcomes have not been adequate, indicating the need to investigate functional dressings for the treatment of diabetic ulcers. Copper selenide nanoparticles (Cu2 Se NPs) demonstrate outstanding photoresponsiveness, which is critical to the healing process. However, their limited solubility in water restricts their application. To synthesize the ODT-PMMA@Cu2 Se NP-doped decellularized periosteum‑sodium alginate functional dressing-ODT-PMMA@Cu2 Se/ECM-S (OP@Cu2 Se/ECM-S), Cu2 Se NPs were modified by n-octadecanethiol (ODT) end-functionalized poly (methacrylic acid) (PMAA) ligands homogeneously dispersed in a decellularized periosteum/sodium alginate matrix...

This study assessed the mechanical properties and surface characteristics of dental prosthetic acrylic resin fabricated by 3D printing, comparing it with subtractive, pressing, and molding techniques. Bar-shaped specimens (N= 90; 65 × 10 × 3.3 mm; ISO:207951) were prepared and assigned into six groups: PRINT (3D printing vis stereolithography with PriZma 3D Bio Denture, Makertech Labs); SUB (subtractive manufacturing with Vipiblock Trilux, Vipi); PRESS Base (pressing using muffle with Thermo Vipi Wave, Vipi for base); PRESS Tooth (pressing with Onda-cryl, Clássico for tooth); MOLD Base (molding using addition silicone with Vipi Flash, Vipi for base); and MOLD Tooth (molding with Dencor, Clássico for tooth)...

This paper discusses a microfluidic system designed for surface plasmon resonance (SPR) sensing, incorporating integrated microvalves. This system is built from a layered structure of polydimethylsiloxane (PDMS) and polymethylmethacrylate (PMMA). The functionality of the microvalves is verified through a conductance method involving electrodes positioned at the microfluidic channels' inlets and outlets. These microvalves can fully close at a control pressure of 0.3 MPa, with their operation depending on the duration of the applied pressure...

The aim of this paper is to discuss the effect of the sensor on the acoustic emission (AE) signature and to develop a methodology to reduce the sensor effect. Pencil leads are broken on PMMA plates at different source-sensor distances, and the resulting waves are detected with different sensors. Several transducers, commonly used for acoustic emission measurements, are compared with regard to their ability to reproduce the characteristic shapes of plate waves. Their consequences for AE descriptors are discussed...

Research on titanium-oxo complexes (TOCs) is usually focused on their structure and photocatalytic properties. Findings from these investigations further sparked our interest in exploring their potential biological activities. In this study, we focused on the synthesis and structure of a compound with the general formula [Ti8 O2 (Oi Pr)20 (man)4 ] ( 1 ), which was isolated from the reaction mixture of titanium(IV) isopropoxide with mandelic acid (Hman) in a molar ratio of 4:1. The structure ( 1 ) was determined using single-crystal X-ray diffraction, while spectroscopic studies provided insights into its physicochemical properties...

The adsorption of polymers on solid surfaces is common in many industrial applications, such as coatings, paints, catalysis, colloids, and adhesion processes. The properties of absorbed polymers commonly vary with temperature. In this paper, inverse gas chromatography at infinite dilution was used to determine the physicochemical characterization of PMMA adsorbed on silica. A new method based on the London dispersion equation was applied with a new parameter associating the deformation polarizability with the harmonic mean of the ionization energies of the solvent...

Since ozone is highly corrosive, it can substantially affect the mechanical and chemical properties of the materials; consequently, it could affect the applicability of those materials in medical applications. The effect of ozone sterilization on the chemical and mechanical properties of additively manufactured specimens of biocompatible poly(methyl-methacrylate) was observed. FDM 3D-printed specimens of biocompatible PMMA in groups of five were exposed to high concentrations of ozone generated by corona discharge for different durations and at different ozone concentrations inside an enclosed chamber with embedded and calibrated ozone, temperature, and humidity sensors...

In this study, the fabrication of microfluidic chips through the bonding of poly (methyl methacrylate) (PMMA) boards featuring designed patterns to create a three-dimensional sandwich structure with embedded microchannels was explored. A key focus was optimization of the interface quality of bonded PMMA pairs by adjusting the solvent, such as such as acetone, alcohol, and their mixture. Annealing was conducted below 50 °C to leverage the advantages of low-temperature bonding. Because of the differences in the chemical reactivity of PMMA toward acetone, alcohol, and their combinations, the resulting defect densities at the bonding interfaces differed significantly under low-temperature annealing conditions...

Polymethyl methacrylate (PMMA) is an interesting polymer employed in various applications due to its outstanding properties. However, its electrical and mechanical properties can be further improved by incorporating nanoparticles, and in particular, PMMA nanocomposite with nanoparticles provides various multifunctional properties. This work reports PMMA nanocomposite preparation and structural and optical characterizations incorporating carbon nanotubes (CNTs), TiO2 nanoparticles, and carbon quantum dots (CQDs)...

Based on real-time detection of plantar pressure, gait recognition could provide important health information for rehabilitation administration, fatigue prevention, and sports training assessment. So far, such researches are extremely limited due to lacking of reliable, stable and comfortable plantar pressure sensors. Herein, a strategy for preparing high compression strength and resilience conductive iongels has been proposed by implanting physically entangled polymer chains with covalently cross-linked networks...

The global concern regarding the ubiquitous presence of plastics in the environment has led to intensified research on the impact of these materials on wildlife. In the Australian context, marsupials represent a unique and diverse group of mammals, yet little is known about their exposures to plastics. This study aimed to assess the contamination levels of seven common plastics (i.e., polystyrene (PS), polycarbonate (PC), poly-(methyl methacrylate) (PMMA), polypropylene (PP), polyethylene terephthalate (PET), polyethylene (PE), and polyvinyl chloride (PVC)) in both the diet and faeces of kangaroos, wallabies and koalas sampled from a sanctuary in Northeastern Australia...

OBJECTIVE: To report the clinical outcomes in toy-breed dogs with atlantoaxial instability (AAI) stabilized with patient-specific 3-D-printed titanium plates or polymethyl methacrylate (PMMA), both with the assistance of 3-D-printed drill guides. ANIMALS: 15 client-owned dogs undergoing surgical treatment for AAI between January 1, 2020, and October 31, 2022. METHODS: The clinical characteristics, diagnostic images, and neurological outcomes of 15 dogs treated for AAI using 3-D-printing technology were reviewed...

OBJECTIVE: to present a 12-month follow-up with photographic and tomographic analyses of the effect of polymethyl methacrylate-based bone cement graft (PMMA) in gingival exposure (GE) in patients with excessive gingival display (EGD). METHODS: Twelve patients with EGD were included. The PMMA was surgically placed. A frontal and lateral photograph protocol was performed at baseline (T0 ), 3 (T3 ), 6 (T6 ), and 12 months (T12 ) post-operatively. Soft tissue cone-beam computed tomography (ST-CBCT) was performed at T0 and T12 ...