electro

The ability to move and self-organize in response to external stimuli is a fascinating feature of living active matter. Here, the metallo-dielectric rod-shaped microswimmers are shown to have a similar behavior in the presence of an AC electric field. The silica-copper Janus microrods were fabricated using the physical vapor deposition-based glancing angle deposition technique (GLAD). When the aqueous solution of the microrods was under the influence of an external AC electric field, they were found to exhibit different phases such as clustering, swimming, and vertical standing in response to variation of the applied frequency...

New tranexamic acid (TXA) complexes of ferric(III), cobalt(II), nickel(II), copper(II) and zirconium(IV) were synthesized and characterized by elemental analysis (CHN), conductimetric (Λ), magnetic susceptibility investigations (μeff), Fourier transform infrared (FT-IR), proton nuclear magnetic resonance (1H NMR), ultraviolet visible (UV-vis.), optical band gap energy (Eg) and thermal studies (TG/DTG and DTA). TXA complexes were established in 1:2 (metal: ligand) stoichiometric ratio according to CHN data...

BACKGROUND: Exercise therapy (ET) is frequently an early treatment of choice when managing shoulder pain, yet evidence on its efficacy to expedite recovery is inconsistent. Moreover, the value of adding adjunct therapies (i.e. injections, manual therapy, electrotherapy) to ET is currently unclear. This study combined both direct and indirect evidence across studies on the effectiveness of ET with/without adjunct therapies compared to usual medical care for adults with chronic shoulder pain...

Correction for 'Influence of a neighbouring Cu centre on electro- and photocatalytic CO2 reduction by Fe-Mabiq' by Kerstin Rickmeyer et al. , Chem. Commun. , 2024, 60 , 819-822, https://doi.org/10.1039/D3CC04777F.

Realizing room-temperature, efficient, and reversible fluoride-ion redox is critical to commercializing the fluoride-ion battery, a promising post-lithium-ion battery technology. However, this is challenging due to the absence of usable electrolytes, which usually suffer from insufficient ionic conductivity and poor (electro)chemical stability. Herein we report a water-in-salt (WIS) electrolyte based on the tetramethylammonium fluoride salt, an organic salt consisting of hydrophobic cations and hydrophilic anions...

Elevated levels of carbon dioxide (CO2 ) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature...

Sepsis is a systemic inflammatory response syndrome caused by pathogen infection, while the current antibiotics mainly utilized in clinical practice to combat infection result in the release of pathogen-associated molecular patterns (PAMPs) in the body. Herein, we provide an innovative strategy for controlling sepsis, namely, capturing active pathogens by means of extracorporeal blood purification. Carbon nanotubes (CNTs) were modified with dimethyldiallylammonium chloride (DDA) through γ-ray irradiation-induced graft polymerization to confer a positive charge...

This work applies a higher order thickness-stretched model for the electro-elastic analysis of the composite graphene origami reinforced square plate sandwiched by the piezoelectric/piezomagnetic layers subjected to the thermal, electric, magnetic and mechanical loads. The plate is manufactured of a copper matrix reinforced with graphene origami where the effective material properties are calculated based on the micromechanical models as a function of volume fraction and folding degree of graphene origami, material properties of matrix, reinforcement, and local temperature...

BACKGROUND: Previous studies have found electroacupuncture could improve the clinical symptoms of first-episode major depressive disorder (MDD), but the exact neural mechanism of action needs to be further elucidated. METHODS: Twenty-eight first-episode MDD patients were randomly divided into 14 electro-acupuncture stimulation (EAS) groups and 14 sham-acupuncture stimulation (SAS) groups, and clinical symptoms were assessed and functional magnetic resonance imaging (fMRI) scans were done in both groups...

The phenomenon of fire or even explosion caused by thermal runaway of lithium-ion power batteries poses a serious threat to the safety of electric vehicles. An in-depth study of the core-material thermal runaway reaction mechanism and reaction chain is a prerequisite for proposing a mechanism to prevent battery thermal runaway and enhance battery safety. In this study, based on a 24 Ah commercial Li(Ni0.6 Co0.2 Mn0.2 )O2 /graphite soft pack battery, the heat production characteristics of different state of charge (SOC) cathode and anode materials, the separator, the electrolyte, and their combinations of the battery were investigated using differential scanning calorimetry...

Electro-optical effect-based liquid crystal devices have been extensively used in optical modulation techniques, in which the Kerr coefficient reflects the sensitivity of the liquid crystals and determines the strength of the device's operational electric field. The Peterlin-Stuart theory and the O'Konski model jointly indicate that a giant Kerr coefficient could be obtained in a material with both a large geometrical anisotropy and an intrinsic polarization, but such a material is not yet reported. Here we reveal a ferroelectric effect in a monolayer two-dimensional mineral vermiculite...

Herein, MXene-based composite aerogel (MXene-Fe2+ aerogel) are constructed by a one-step freeze-drying method, using Ti3 C2 Tx MXene layers as substrate material and ferrous ion (Fe2+ ) as crosslinking agent. With the aid of the Fe2+ induced Fenton reaction, the synthesized aerogels are used as the particle electrodes to remove phenol from wastewater with three-dimensional electrode technology. Combined with the dual roles of Fe2+ and the highly conductive MXene, the obtained particle electrode possesses extremely effective phenol degradation...

The presence of levofloxacin (LEV) in aqueous solutions can pose health risks to humans, have adverse effects on aquatic organisms and ecosystems, and contribute to the development of antibiotic-resistant bacteria. This study aims to investigate the feasibility of using electrocoagulation residuals (ECRs) as a heterogeneous catalyst in the electro-Fenton process for degrading LEV. By combining electrocoagulation residuals with sodium alginate, ECRs-alginate beads were synthesized as a heterogeneous electro-Fenton composite...

Soil contamination in outdoor shooting ranges (OSRs) is a major threat for human health, particularly when, after the end of activities, the land is used for recreational areas or agricultural production. The status of land degradation of an OSR in southern Italy was assessed using a multisensor approach. It was based on: i) proximal sensors, including electromagnetic induction (EMI) for measuring soil electrical conductivity (ECa) and magnetic susceptibility (MSa), γ-ray spectrometry for K, eU and eTh analyses and ultrasonic penetrometry detecting cone index (CI) data representative of soil's strength, ii) field surveys on soil thickness (ST), and iii) laboratory analyses of potentially-toxic-elements (PTEs) by portable X-ray fluorescence spectrometry and polycyclic aromatic hydrocarbons (PAHs) by gas-chromatography...

Active medical devices rely on a source of energy that is applied to the human body for specific purposes such as electrosurgery, ultrasounds for breaking up kidney stones (lithotripsy), laser irradiation, and other medical techniques and procedures that are extensively used. These systems must provide adequate working power with a commitment not to produce side effects on patients. Therefore, the materials used in these devices must effectively transmit energy, allow for security control, sense real-time variations in case of any issues, and ensure the implementation of closed-loop systems for control...

Antibody responses to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are multi-targeted and variable over time. Multiplex quantitative serological assays are needed to provide accurate and robust seropositivity data for the establishment of serological signatures during vaccination and or infection. We describe here the validation and evaluation of an electro-chemiluminescence (ECL)-based Mesoscale Discovery assay (MSD) for estimation of total and functional IgG relative to SARS-CoV-2 spike, nucleocapsid and receptor binding (RBD) proteins in human serum samples to establish serological signatures of SARS-CoV-2 natural infection and breakthrough cases...

The global production landscape exhibits a substantial need for efficient and clean energy. Enhancing and advancing energy storage systems are a crucial avenue to optimize energy utilization and mitigate costs. Lithium batteries are the most effective and impressive energy utilization system at present, with good safety, high energy density, excellent cycle performance, and other advantages, occupying most of the market. However, due to the defects in the electrode material of the battery itself, the electrode will undergo the process of expansion, stress evolution, and electrode damage during electro-chemical cycling, which will degrade battery performance...

In this paper, two experimental procedures are reported, namely electro-deposition in the ultrathin liquid layer and chemical micro-etching. Firstly, a large area quasi-two-dimensional periodic membrane with adjustable density is deposited on a Si substrate driven by half-sinusoidal voltage, which is composed of raised ridges and a membrane between the ridges. The smaller the voltage frequency is, the larger the ridge distance is. The height of a raised ridge changes synchronously with the amplitude. The grain density distribution of membrane and raised ridge is uneven; the two structures change alternately, which is closely related to the change of growth voltage and copper ion concentration during deposition...

The five-hole pressure probe based on Micro-Electro-Mechanical Systems (MEMS) technology is designed to meet the needs of engine inlet pressure measurement. The probe, including a pressure-sensitive detection unit and a five-hole probe encapsulation structure, combines the advantages of a five-hole probe with fiber optic sensing. The pressure-sensitive detection unit utilizes silicon-glass anodic bonding to achieve the integrated and batch-producible manufacturing of five pressure-sensitive Fabry-Perot (FP) cavities...

While the availability of low-cost micro electro-mechanical systems (MEMS) accelerometers, gyroscopes, and magnetometers initially seemed to promise the possibility of using them to easily track the position and orientation of virtually any object that they could be attached to, this promise has not yet been fulfilled. Navigation-grade accelerometers and gyroscopes have long been the basis for tracking ships and aircraft, but the signals from low-cost MEMS accelerometers and gyroscopes are still orders of magnitude poorer in quality (e...