dental prosthesis

In the maxillary anterior area, the esthetic integration of prosthetic restorations is a challenge, particularly for screw-retained implant prostheses. This case report presents the management and clinical outcome of an old partial edentulous maxillary jaw in an esthetic zone in a young patient with a very limited mouth opening. This patient was rehabilitated with an implant screw-retained fixed partial denture (FPD) using both digital and conventional techniques.

This study assessed the mechanical properties and surface characteristics of dental prosthetic acrylic resin fabricated by 3D printing, comparing it with subtractive, pressing, and molding techniques. Bar-shaped specimens (N= 90; 65 × 10 × 3.3 mm; ISO:207951) were prepared and assigned into six groups: PRINT (3D printing vis stereolithography with PriZma 3D Bio Denture, Makertech Labs); SUB (subtractive manufacturing with Vipiblock Trilux, Vipi); PRESS Base (pressing using muffle with Thermo Vipi Wave, Vipi for base); PRESS Tooth (pressing with Onda-cryl, Clássico for tooth); MOLD Base (molding using addition silicone with Vipi Flash, Vipi for base); and MOLD Tooth (molding with Dencor, Clássico for tooth)...

Most edentulous patients prefer fixed restoration or detachable prostheses over conventional complete dentures. The case report aims to address and discuss the clinical and laboratory steps of implant-supported, bar-retained maxillary overdenture and mandibular implant-supported, metal-acrylic resin, screw-retained, fixed complete denture. Impression techniques and laboratory steps are discussed and demonstrated to minimize the post-fabrication or insertion complication. It lets you achieve the passive fit of the prosthesis that maintains the osseointegration by reducing stress on implants and the surrounding bone...

Background and Objectives : Despite the identified benefits of early implant loading, studies have questioned its advantages compared to delayed loading in edentulous patients. This study aimed to evaluate clinical peri-implant parameters and marginal bone loss around early placed and loaded mandibular implant overdentures with a 60-month follow-up. Materials and Methods : In this prospective cohort study, 43 patients were enrolled to receive 86 early loading sub-crestal dental implants through prosthetic guides...

Background : The anterior maxilla is challenging regarding aesthetic rehabilitation. Current bone augmentation techniques are complex and 3D-printed bioceramic bone grafts can simplify the intervention. Aim: A four-teeth defect in the anterior maxilla was reconstructed with a 3D-printed synthetic patient-specific bone graft in a staged approach for dental implant delivery. Methods : The bone graft was designed using Cone-Beam Computed Tomography (CBCT) images. The bone graft was immobilized with fixation screws...

There is limited information regarding implant and prosthetic survival after osseous microvascular free flap (OMFF). This case series aims to describe the placement of short and extra short implants in osseous microvascular free flaps to support prostheses, and present an up to 40-month retrospective follow-up. Short and extra short dental implants were placed in six fibula free flaps (FFF) and in two microvascular deep circumflex iliac artery (DCIA) flaps. In total, 27 short and extra short dental implants have been placed into two different types of free flaps...

OBJECTIVES: To determine the prevalence of peri-implant diseases in patients treated in a university setting without a regular peri-implant supportive therapy schedule, and to identify the risk indicators associated with peri-implantitis. MATERIAL AND METHODS: A retrospective cohort study was made of patients with dental implants with at least 12 months of functional loading who did not receive regular peri-implant supportive therapy. Patient- and implant-related variables were retrieved, and clinical and radiological examinations were performed...

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides...

OBJECTIVE: The aim of this study was to explore the factors associated with the survival of root canal treated teeth in a practise-based study setting in a 5-year period. MATERIAL AND METHODS: This retrospective study used data from the electronic patient registration system of the public dental services of the City of Oulu, Finland. The inclusion criteria for this study were patients aged ≥ 20 years who had root canal treatment (RCT) that was initiated in 2014...

Patients may present with failing mandibular dentition either involving the entire arch, partial arch that currently has a partial denture to replace the prior missing teeth or wearing a full denture. Finances may limit restoration of the arch with an All-on-X concept and the patient's goals are a stable prosthesis that does not move whenconcept and the patient's goals are a stable prosthesis that does not move when eating or speaking is the patient's expressed goal. Overdentures can fulfil that goal and provide a stable restored arch at a lower treatment cost than treatment with a fixed hybrid prosthesis...

PURPOSE: To evaluate peri-implant tissue health and bone resorption in patients with implant-supported fixed partial rehabilitations. In particular, possible correlations between plaque accumulation and bone loss, as well as other periimplant health parameters, were investigated. MATERIALS AND METHODS: A total of 44 patients rehabilitated with fixed implant-supported partial rehabilitations were included. The following parameters were recorded: spontaneous bleeding (SB), suppuration, bleeding on probing (BOP), plaque index (PI), and probing depth (PD)...

PURPOSE: To evaluate and compare the difference in retention between implant-supported restorations with and without surface modification of the implant abutments. MATERIALS AND METHODS: A total of 30 patients with singletooth implants were restored with cement-retained (Multilink N, Ivoclar) restorations using titanium base abutments (Variobase, Straumann) and randomly assigned surface modifications. Group 1 used nonmodified abutments, group 2 used sandblasted abutments, and group 3 used sandblasted abutments followed by an application of metal primer...

PURPOSE: To investigate the relationship between the structural parameters of trabecular bone obtained from CBCT imaging and the primary stability of dental implants. MATERIALS AND METHODS: Sixty patients underwent implant placement followed by primary stability evaluation via measurement of the insertion torque (IT) and the implant stability quotient (ISQ). Gray values (GV) and the fractal dimension (FD) were also measured using pretreatment CBCT images. RESULTS: FD values showed a positive and significant relationship with ISQ and IT values (P = ...

PURPOSE: To describe the use of digital technology to surgically guide the shell technique using allogenic cortical plates for a fully guided bone augmentation procedure. MATERIALS AND METHODS: A total of 10 patients who required bone augmentation for implant placement were included in this study. Allogenic cortical plates were planned using CAD/CAM to have identical thickness to the original cortical plates, then were digitally positioned and shaped to outline the bone defect according to the existing anatomical details...

PURPOSE: To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method-in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects-to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone...

PURPOSE: To analyze the effectiveness of coating of abutments with antimicrobial agents and their influence on the physicochemical and biologic properties of the coated materials. MATERIALS AND METHODS: This work was registered in Open Science Framework (osf.io/6tkcp) and followed the PRISMA protocols. A search of two independent reviewers of articles published up to October 29, 2021, was performed in the Embase, PubMed, Science Direct, and Scopus databases. RESULTS: The databases found a total of 1,474 references...

PURPOSE: To analyze the available evidence and assess the effect of different implant coatings on healing outcomes. MATERIALS AND METHODS: Using the PICOS strategy, a structured question was formed. A protocol was agreed upon and registered with PROSPERO (no. CRD42022321926). The MEDLINE, Embase, Cochrane Database of Systematic Reviews, Scopus, Web of Science, Pubmed, and ScienceDirect databases were searched using a structured strategy. Study selection was independently carried out in duplicate, first by title and abstract, then by full-text assessment...

No abstract text is available yet for this article.

No abstract text is available yet for this article.

PURPOSE: The formation of a biological seal between implant abutments and the surrounding soft tissue is a preventive strategy against peri-implantitis. The aim of this study is to test the hypothesis that surfaces of prosthetic implant abutments treated with vacuum ultraviolet (VUV) light enhance the growth and function of human gingival fibroblasts. MATERIALS AND METHODS: Implant abutments were treated with 172 nm VUV light for one minute. Untreated abutments were subjected as controls...