dental implant neck design

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines...

BACKGROUND: This paper aims to indicate numerically the accurate porosity used for dental implants, following the emphasis on the preference for titanium foam on pure titanium implants. A 3D-optimized numerical model is created to demonstrate the detailed differences between models. METHOD: A 3D finite element model was generated using Abaqus for titanium and titanium foam implants with different porosities (50,60,62.5,70, and 80%) fixed in cortical and cancellous bone...

BACKGROUND/PURPOSE: Dental implants have been a popular treatment for replacing missing teeth. The purpose of this study was to investigate the impact of engaging (hexagonal) and non-engaging (non-hexagonal) abutments in various six-unit fixed prosthesis on the stress distribution and loading located in the implant neck, implant abutment, and surrounding bone. MATERIALS AND METHODS: Three implants were digitally designed and inserted parallel to each other in edentulous sites of the maxillary right canine, maxillary right central incisor, and maxillary left canine...

BACKGROUND: Immediate placement of dental implants with dental restoration at the leg donor site requires implant components and prosthetic materials that are not packaged sterile. PURPOSE: This study aimed to determine if there was a difference in donor surgical site infection between patients that received a fibula free flap with dental implants and immediate teeth (ITFFF: immediate teeth fibula free flap) before flap transfer to the defect site when compared to standard fibula free flaps (SFFFs) without dental implant placement...

PURPOSE: This prospective study evaluated the marginal bone level and periodontal parameters 6 years after placement of a convergent transmucosal neck implant. MATERIALS AND METHODS: In total, 71 implants were placed in 60 patients. Of these, 52 implants were placed with a flapless technique and with the convergent neck exposed for 1.0 mm (early and delayed placement), while 19 implants were placed immediately after extraction (immediate placement). At least 3 months after insertion, customised abutments were applied and provisional resin crowns were cemented, while being careful to prevent any tissue compression...

AIM: To evaluate and compare the strain development and distribution of maxillary implant-supported complete fixed dental prosthesis (ISCFDP) with computer-aided design-computer-aided manufacturing milled PEEK BIO-HPP superstructure when placed using All-on-4 and All-on-6 situation using a strain gauge and finite element analysis (FEA). SETTING AND DESIGN: This is an in vitro study to evaluate and compare the stress minimization and strain developed at implant in premolar and in two clinically simulated situation of All-on-4 and All-on -6 ISCFDP...

BACKGROUND AND OBJECTIVE: This systematic review aimed to explore clinical outcomes of marginal or crestal bone level (MBL) and soft tissue status around implants, following the placement of rough micro-threaded/laser-microtextured surface (LMS) implants. These outcomes are compared with those following the placement of smooth machined-neck implants. MATERIALS AND METHODS: Using EBSCO Information Services, we conducted a web-based search of databases such as the PubMed, Scopus, and EMBASE, for relevant English-language scientific papers published between January 2013 and August 2022...

OBJECTIVES: The objective of this study, which included a 5-year follow-up, was to compare peri-implant soft tissue health, crestal bone loss (CBL), and buccal bone thickness (BBT) around triangular cross-section neck (TN) or round neck (RN) implants, using cone-beam computed tomography. MATERIALS AND METHODS: This study was initially designed as a prospective 1-year randomized controlled study and then extended with a 5-year retrospective evaluation of clinical and radiographic records...

INTRODUCTION: Dental implants are frequently preferred method for oral rehabilitation all over the world. The incidence of various complications such as incorrect prosthesis, peri-implant mucositis, and peri-implantitis is high; premature loss of implants is encountered due to osteointegration process not being completed for some unexplained reasons. However, there is no study in the literature examining the nonfunctional period of implants. Closure screws of different implant companies have different designs like surface properties, and areas, where closure screws sit, are important reservoirs for microorganism colonization...

PURPOSE: This study aimed to evaluate the long-term cumulative survival rate (CSR) of dental implants with micro-threads in the neck over a 10-year follow-up period and to examine the factors influencing the survival rate of dental implants. METHODS: This retrospective study was based on radiographic and dental records. In total, 151 patients received 490 Oneplant® dental implants with an implant neck micro-thread design during 2006-2010 in the Department of Periodontology of Seoul National University Dental Hospital...

One of the strategies for the fight against peri-implantitis is the fabrication of titanium dental implants with the part close to the neck without roughness. It is well known that roughness favors osseointegration but hinders the formation of biofilm. Implants with this type of structure are called hybrid dental implants, which sacrifice better coronal osseointegration for a smooth surface that hinders bacterial colonization. In this contribution, we have studied the corrosion resistance and the release of titanium ions to the medium of smooth (L), hybrid (H), and rough (R) dental implants...

OBJECTIVES: Dental implants with a triangular neck design have been developed in order to maintain peri-implant bone. The primary aim of this randomized controlled trial (RCT) was to assess after 5 years the peri-implant bone stability and the peri-implant soft tissue conditions with this new triangular implant neck design compared to a conventional round neck implant design. MATERIAL AND METHODS: This is a secondary evaluation of a RCT including 34 patients...

OBJECTIVE: Surgery remains the mainstay for managing most neoplasms arising in the head and neck area. Removable or fixed prostheses are commonly used for prosthetic rehabilitation of head and neck defects following surgical resection. Some major challenges in prosthetic rehabilitation after maxillomandibular microvascular reconstruction include excessive prosthetic space, soft tissue bulk, and occlusal disharmony in the remaining dentition. This review focuses on the challenges we have experienced in the real clinical scenario while rehabilitating reconstructed maxillomandibular defects and the effective prosthetic treatment options that could be considered in each situation...

OBJECTIVE: The objective of this overview is to evaluate the effectiveness of dental implants placed in patients who underwent radiotherapy for the treatment of head and neck cancer, as well as to assess the methodological quality of the included systematic reviews. METHODS: The study was conducted in four PubMed, Lilacs, Dare Cochrane and Google Scholar databases until July 2022, using the descriptors "Radiotherapy," "Dental implants," and "Head and Neck Cancer...

Among the complications that can occur at dental implants, the fracture of any implant component is a relatively infrequent but clinically relevant problem. Due to their mechanical characteristics, small diameter implants are at higher risk of such complication. The aim of this laboratory and FEM study was to compare the mechanical behavior of a 2.9 mm and a 3.3 mm diameter implant with a conical connection under standard static and dynamic conditions, following the ISO 14801:2017. Finite element analysis was performed to compare the stress distribution on the tested implant systems under a 300 N, 30° inclined force...

BACKGROUND/PURPOSE: Dental implant fails due to mechanical failure of the implant contribute to about 10-15 % of implant failures. It is necessary to prevent the design failure of the implant since it leads to bone loss which further leads to complications in reimplantation. This makes it important to test the design of a dental implant using FEM and in vitro testing before its application. The purpose of this article is to test the design of a dental implant using in vitro testing by using an artificial bone model and validation of the data using Finite Element Method (FEM)...

PURPOSE: The aim of this randomized controlled clinical trial was to evaluate peri-implant marginal bone levels (MBLs) and soft tissue dimension changes 1 year after loading. Patients in the control group received bone-level implants, whereas in the test group, tissue-level implants with a convergent transmucosal neck were used. MATERIAL AND METHODS: MBLs were calculated by measuring the distance from the implant shoulder to the first visible bone-to-implant contact using standardized periapical digital radiographs...

Titanium is the main component of dental implants. It is also routinely used as a framework material for implant-supported full-arch prostheses due to its low density, biocompatibility, and other mechanical properties. Remarkable mechanical properties such as lesser mass density and higher young's modulus of graphene have gained popularity among scientists, improving the properties of biomedical implants. Thus, our study aimed to compare the outcome through the von Mises stresses generated on All-on-6 and All-on-3 implant models, as well as on the framework, and evaluate the effect of stress patterns on the crestal bone around implants in the mandible...

The present work aims to evaluate the effect of various surface coatings of titanium dental implants by varying the friction coefficient (µ) at the interface between the dental implant and jawbone using finite element analysis (FEA) methods and to provide a comparative analysis between the various surface coatings and implant designs. An accurate model of the dental implant prosthetics consisting of the hard (cortical) and the soft (cancellous) bone, with the various titanium dental implant designs was modelled using a 3D CAD software, and the FE mesh model was generated using HyperMesh 13...

Fretting corrosion at the head-neck interface of modular hip implants, scientifically termed trunnionosis/taperosis, may cause regional inflammation, metallosis, and adverse local tissue reactions. The severity of such a deleterious process depends on various design parameters. In this review, the influence of surface topography (in some cases, called microgrooves/ridges) on the overall performance of the microgrooved head-neck junctions is investigated. The methodologies together with the assumptions and simplifications, as well as the findings from both the experimental observations (retrieval and in vitro) and the numerical approaches used in previous studies, are presented and discussed...