Loading on long bones

BACKGROUND: The screw-retrievable cement-retained (SRCR) design combines the benefits of both screwand cement-retained implant-supported restorations. This concept has sparked interest in implant dentistry. However, there is a lack of research on fracture behaviors and clinical performance of such restorations. OBJECTIVES: The aim of the present article was to review the current literature on the fracture loads and fracture modes of SRCR implant restorations - in vitro studies, and also studies demonstrating the clinical performance of such design...

This retrospective study aimed to evaluate success rate of guided bone regeneration (GBR) bone grafting and investigate survival rate of implants, as well as degree of marginal bone loss (MBL) around implants. This study was carried out between January 2007 and December 2016 on treatment outcomes of patients with implants which used various graft materials, including autograft, allograft, and xenograft. The bone graft success rate and implant survival rate were recorded. The influence of confounding factors such as patient characteristics, bone graft properties, and implant conditions was considered...

Patients may present with failing mandibular dentition either involving the entire arch, partial arch that currently has a partial denture to replace the prior missing teeth or wearing a full denture. Finances may limit restoration of the arch with an All-on-X concept and the patient's goals are a stable prosthesis that does not move whenconcept and the patient's goals are a stable prosthesis that does not move when eating or speaking is the patient's expressed goal. Overdentures can fulfil that goal and provide a stable restored arch at a lower treatment cost than treatment with a fixed hybrid prosthesis...

This study investigates the optimal placement of locking plate screws for bone fracture stabilization in the humerus, a crucial factor for enhancing healing outcomes and patient comfort. Utilizing Finite Element Method (FEM) modeling, the research aimed to determine the most effective screw configuration for achieving optimal stress distribution in the humerus bone. A computer tomography (CT) scan of the humerus was performed, and the resulting images were used to create a detailed model in SOLIDWORKS 2012...

Antibiotic-loaded calcium phosphate cement (CPC) has emerged as a promising biomaterial for drug delivery in orthopedics. However, there are problems such as the burst release of antibiotics, low cumulative release ratio, inappropriate release cycle, inferior mechanical strength, and poor anti-collapse properties. In this research, montmorillonite-gentamicin (MMT-GS) was fabricated by solution intercalation method and served as the drug release pathways in CPC to avoid burst release of GS, achieving promoted cumulative release ratios and a release cycle matched the time of inflammatory response...

STATEMENT OF PROBLEM: Standard surgical and prosthodontic protocols for managing partially dentate patients with implant-supported removable partial dentures (ISRPDs) are lacking. PURPOSE: The purpose of this systematic review was to determine clinical and patient-reported outcome measures (PROMs) in patients provided with ISRPDs in distal edentulous arches based on different surgical and prosthodontic protocols. MATERIAL AND METHODS: An electronic and manual literature search was conducted in 3 databases, PubMed/MEDLINE, SCOPUS, and Cochrane Library, for clinical studies on distal extension ISRPDs related to clinical and patient-reported outcomes...

INTRODUCTION: Macrophages are an important component of innate immunity and involved in the immune regulation of multiple diseases. The functional diversity and plasticity make macrophages to exhibit different polarization phenotypes after different stimuli. During tumor progression, the M2-like polarized tumor-associated macrophages (TAMs) promote tumor progression by assisting immune escape, facilitating tumor cell metastasis, and switching tumor angiogenesis. Our previous studies demonstrated that functional remodeling of TAMs through engineered-modifying or gene-editing provides the potential immunotherapy for tumor...

Osteoarthritis (OA) is a common joint disease characterized by progressive cartilage degeneration. Unfortunately, currently available clinical drugs are mainly analgesics and cannot alleviate the development of OA. Kartogenin (KGN) has been found to promote the differentiation of bone marrow mesenchymal stem cells (BMSCs) into chondrocytes for the treatment of cartilage damage in early OA. However, KGN, as a small hydrophobic molecule, is rapidly cleared from the synovial fluid after intra-articular injection...

Spinal cord injury (SCI) leads to significant sublesional bone loss and high fracture rates. While loss of mechanical loading plays a significant role in SCI-induced bone loss, animal studies have demonstrated mechanical loading alone does not fully account for loss of bone following SCI. Indeed, we have shown that bone loss occurs below the level of an incomplete moderate contusion SCI, despite the resumption of weight-bearing and stepping. As systemic factors could also impact bone after SCI, bone alterations may also be present in bone sites above the level of injury...

Bone regeneration and mineralization can be achieved by means of distraction osteogenesis (DO). In the present study, we investigated the effect of stromal cell-derived factor 1 (SDF-1) and vascular endothelial growth factor (VEGF) on the new bone formation during DO in rats. Forty-eight Sprague-Dawley rats were randomized into four groups of 12 rats each. We established the left femoral DO model in rats and performed a mid-femoral osteotomy, which was fixed with an external fixator. DO was performed at 0.25 mm/12 h after an incubation period of 5 days...

Altered shape of the proximal femur (cam morphology) or acetabulum (pincer morphology) is indicative of femoroacetabular impingement, which can result in hip pain and osteoarthritis of the hip. As mechanical load during growth affects the resulting bone shape, there is strong evidence in males that cam morphology develops during skeletal growth while physes are open, rather than as an adaptation after growth plates are closed (skeletal maturity). This adaptation is particularly evident in athletes who participate at elite levels prior to skeletal maturity...

AIM: One of the most severe complications of primary total knee arthroplasty (TKA) is prosthetic joint infection (PJI). Currently, the use of antibiotic-loaded cement for the prevention of infection is still controversial. The aim of the present study was to evaluate if the use of antibiotic-loaded cement reduces the infection rate in primary total knee arthroplasty in long-term follow-up (more than five years average follow up). METHOD: This study is the follow-up extension of a prospective randomized study, with 2,893 cemented TKA performed between 2005 and 2010 at our institution...

A robust and easily manufactured high-strength and long-term release hydrazone-based isoniazid acrylic (HIA) bone cement is reported. The mechanical strength of HIA bone cement is similar to that of normal polymethyl methacrylate (PMMA) bone cement, far surpassing that of traditional isoniazid-containing antibiotic-loaded bone cement (INH bone cement). Isoniazid is connected to the bone cement through bioorthogonal hydrazone chemistry, and it possesses release properties superior to those of INH bone cement, allowing for the sustained release of isoniazid for up to 12 weeks...

Primary implant stability, which refers to the stability of the implant during the initial healing period is a crucial factor in determining the long-term success of the implant and lays the foundation for secondary implant stability achieved through osseointegration. Factors affecting primary stability include implant design, surgical technique, and patient-specific factors like bone quality and morphology. In vivo, the cyclic nature of anatomical loading puts osteosynthesis locking screws under dynamic loads, which can lead to the formation of micro cracks and defects that slowly degrade the mechanical connection between the bone and screw, thus compromising the initial stability and secondary stability of the implant...

Osteoporosis is a disease that causes low bone mass and deterioration of bone microarchitecture. Puerarin is a natural isoflavone compound that has been shown to possess anti-inflammatory, antioxidant and ameliorative effects on osteoporosis with less adverse reactions. However, its fast metabolism and low oral bioavailability limit its application. This study aimed to prepare D-α-tocopherol polyethylene glycol 1000 succinate (TPGS)- modified Puerarin Long Circulating Liposomes (TPGS-Puerarin-liposomes), in order to improve the oral bioavailability of puerarin, before evaluation of its pharmacological activity in vitro and in vivo...

Achieving sufficient bone regeneration in large segmental defects is challenging, with the structure of bone repair scaffolds and their loaded bioactive substances crucial for modulating the local osteogenic microenvironment. This study utilized digital laser processing (DLP)-based 3D printing technology to successfully fabricate high-precision methacryloylated polycaprolactone (PCLMA) bionic bone scaffold structures. Adipose-derived stem cell-engineered nanovesicles (ADSC-ENs) were uniformly and stably modified onto the bionic scaffold surface using a perfusion device, constructing a conducive microenvironment for tissue regeneration and long bone defect repair through the scaffold's structural design and the vesicles' biological functions...

Introduction: Developmental engineering based on endochondral ossification has been proposed as a potential strategy for repairing of critical bone defects. Bone development is driven by growth plate-mediated endochondral ossification. Under physiological conditions, growth plate chondrocytes undergo compressive forces characterized by micro-mechanics, but the regulatory effect of micro-mechanical loading on endochondral bone formation has not been investigated. Methods: In this study, a periodic static compression (PSC) model characterized by micro-strain (with 0...

PURPOSE OF REVIEW: Anterior shoulder instability is associated with concomitant injury to several stabilizing structures of the shoulder, including glenoid bone loss. While instability is most common in young athletes and patients with predisposing conditions of hyperlaxity, recurrent shoulder instability can occur throughout various age ranges and may lead to longer term effects including pain and shoulder arthritis. Glenoid bone loss exceeding certain thresholds is generally treated by glenoid reconstruction via bone block augmentation to adequately stabilize the glenohumeral joint...

OBJECTIVES: There is conflicting data regarding the response of older people with HIV (PWH) to antiretroviral therapy (ART). The objective of this study was to evaluate the long-term immunological and virological responses, changes in regimen, and adverse drug reactions (ADRs) in older participants (50+ years) compared with younger (18-34 years) and middle-aged (35-49 years) PWH. METHODS: A retrospective review of medical records was conducted on 1622 participants who received ART in Yunnan Province, China, from 2010 to 2019...

Osseointegrated transfemoral prostheses experience aseptic complications with an incidence between 3% and 30%. The main aseptic risks are implant loosening, adverse bone remodeling, and post-operative periprosthetic fractures. Implant loosening can either be due to a lack of initial (primary) stability of the implant, which hinders bone ingrowth and therefore prevents secondary stability, or, in the long-term, to the progressive resorption of the periprosthetic bone. Post-operative periprosthetic fractures are most often caused by stress concentrations...