Corvis

Background : A higher prevalence of ophthalmological alterations in systemic inflammatory diseases has been demonstrated. Objectives : Our objectives were to determine anterior segment findings and corneal properties in alopecia areata (AA). Methods : This is a case-control study. Severe AA patients (Severity of Alopecia Tool > 50%) and non-AA subjects underwent a general ophthalmological examination, a Pentacam and Corvis scheimpflug technology examination (Oculus Optikgeräte GmbH, Wetzlar, Germany)...

PURPOSE: To verify corneal biomechanical changes, poststromal augmentation using myopic small-incision lenticule extraction's (SMILEs) lenticules in advanced keratoconus (KCN) through Corvis ST (Oculus, Wetzlar, Germany). MATERIALS AND METHODS: A clinical trial enrolled 22 advanced KCN patients. We implanted lenticules exceeding 100 μ according to a nomogram and evaluated biomechanical factors through Corvis ST at 3-, 6-, and 24-month postimplantation. We examined parameters during the first applanation (A1), second applanation (A2), highest concavity (HC)/max concavity events, and Vinciguerra screening parameters, as recently established criteria derived from the ideal blend of diverse biomechanical and ocular factors and formulated through the application of logistic regression...

PURPOSE: This retrospective longitudinal study evaluated the biomechanical E-staging in KC corneas before and after intracorneal ring segment (ICRS) implantation (Intacs® SK, Addition Technology, Illinois, United States). METHODS: Biomechanical E-staging for ectatic corneal diseases was applied retrospectively on 49 KC corneas of 41 patients who underwent ICRS implantation. The main outcome parameters included the Corvis Biomechanical Factor (CBiF, the linearized Corvis Biomechanical Index and the biomechanical parameters included), the resulting biomechanical E-staging, the stress-strain index, thinnest corneal thickness (TCT), maximal anterior keratometry (Kmax), and the anterior radius of curvature (ARC)...

PURPOSE: To investigate the percent change in central corneal thickness (%ΔCCT) during air-puff-induced deformation as an indicator of corneal biomechanical response. METHODS: Forty ex vivo human eyes from forty donors were imaged using the CorVis ST at experimentally controlled intraocular pressure (IOP) of 10, 20, 30, and 40 mmHg, followed by uniaxial strip testing to calculate tensile modulus. The CorVis ST research software tracked the anterior and posterior cornea edges and determined the dynamic corneal response (DCR) parameters...

Purpose: To evaluate the change in corneal biomechanics in patients with postoperative ectasia risk when combining two common laser vision correction procedures (tPRK and FS-LASIK) with cross-linking (in tPRK Xtra and FS-LASIK Xtra). Methods: The study included 143 eyes of 143 myopic, astigmatic patients that were divided into non-cross-linked refractive surgery groups (non-Xtra groups, tPRK and FS-LASIK) and cross-linked groups (Xtra groups, tPRK Xtra and FS-LASIK Xtra) according to an ectasia risk scoring system...

PURPOSE: To comprehensively identify the corneal biomechanical differences measured by Corvis ST between different degrees of myopia and emmetropia. DESIGN: Systematic review and meta-analysis. METHODS: Electronic databases, including PubMed, Embase, and Web of Science, were systematically searched for studies comparing the corneal biomechanics among various degrees of myopes and emmetropes using Corvis ST. The weighted mean differences and 95% confidence intervals were calculated...

Keratoconus (KC), a leading cause of vision impairment, has an unclear aetiology. This study used Mendelian randomization (MR) to explore the causal links between various factors (smoking, asthma, Down syndrome, inflammatory bowel disease, atopic dermatitis, and serum 25-hydroxyvitamin D levels) and KC. A two-sample MR design, grounded in genome-wide association study (GWAS) summary statistics, was adopted using data from FinnGen, UK Biobank, and other GWAS-related articles. The inverse-variance weighted (IVW) method was employed, complemented by the Wald ratio method for factors with only one single-nucleotide polymorphism (SNP)...

PURPOSE: To characterize corneal biomechanical properties using the CORVIS-ST device in myopic individuals. METHODS: This prospective cross-sectional study included patients with myopia. Our study included 154 eyes of 154 myopic patients aged between 18 and 40 years, with stable refraction for at least 2 years. A full ophthalmological examination and corneal tomography were performed using a Pentacam HR device. Corneal biomechanical parameters were assessed using the CORVIS-ST device in mild, moderate, severe, and extreme myopia groups...

AIM: The purpose is to study the corneal stress-strain index (SSI) in myopic refractive error among Indian subjects. METHODS: A retrospective study where young myopic subjects aged between 11 and 35 years who had undergone corneal biomechanics assessment using Corvis ST between January 2017 and December 2021 were enrolled. Subjects with central corneal thickness (CCT) <500 μ, intraocular pressure (IOP) >21 mmHg, history of any systemic and ocular disease or any previous ocular surgery, high astigmatism, corneal disease such as keratoconus were excluded...

PURPOSE: To investigate corneal biomechanical properties and its associations with the severity of lens dislocation in patients with Marfan syndrome. METHODS: A total of 30 patients with Marfan syndrome and 30 age-, sex- and axial length (AL)-matched controls were recruited. Corneal biomechanical parameters of both groups were measured by CorVis ST and were compared between groups. Potential associations between corneal biomechanical parameters and severity of lens dislocation were also investigated...

PURPOSE: To ascertain whether the integration of raw Corvis ST data with an end-to-end CNN can enhance the diagnosis of keratoconus (KC). METHOD: The Corvis ST is a non-contact device for in vivo measurement of corneal biomechanics. The CorNet was trained and validated on a dataset consisting of 1786 Corvis ST raw data from 1112 normal eyes and 674 KC eyes. Each raw data consists of the anterior and posterior corneal surface elevation during air-puff induced dynamic deformation...

No abstract text is available yet for this article.

INTRODUCTION: To analyze the correlation between orbital compliance and retinal vessel density (VD) based on dynamic Scheimpflug analyzer (Corvis ST) and optical coherence tomographic angiography (OCT-A). METHODS: In this prospective observational study, 65 eyes of 44 patients with thyroid-associated ophthalmopathy (TAO) in quiescent stage were included (15 males and 29 females). The whole eye movement (WEM) was detected by Corvis ST. The superficial capillary plexus VD (SCP-VD) and deep capillary plexus VD (DCP-VD) were obtained by scanning the 3 × 3 mm area around the fovea using OCT-A, while the peripapillary vessel density (ppVD) was obtained by scanning the 4...

PURPOSE: To address if corneal biomechanical behavior has a predictive value for the presence of glaucomatous optical neuropathy in eyes with high myopia. PATIENTS AND METHODS: This observational cross-sectional study included 209 eyes from 108 consecutive patients, divided into four groups: high myopia and primary open-angle glaucoma (POAG) - HMG, n = 53; high myopia without POAG - HMNG, n = 53; non-myopic with POAG - POAG, n = 50; non-myopic and non-POAG- NMNG, n = 53...

OBJECTIVE: Marrow stimulation is used to address knee cartilage defects. In this study, we used the fragility index (FI), reverse fragility index (rFI), and fragility quotient (FQ) to evaluate statistical fragility of outcomes reported in randomized controlled trials (RCTs) evaluating marrow stimulation. DESIGN: PubMed, Embase, and MEDLINE were queried for recent RCTs (January 1, 2010-September 5, 2023) assessing marrow stimulation for cartilage defects of the knee...

BACKGROUND/OBJECTIVES: To determine the relationship between corneal stress-strain index (SSI) and retinal nerve fibre layer (RNFL) thickness. SUBJECTS/METHODS: 1645 healthy university students from a university-based study contributed to the analysis. The RNFL thickness was measured by high-definition optical coherence tomography (HD-OCT), axial length (AL) was measured by IOL Master, and corneal biomechanics including SSI, biomechanical corrected intraocular pressure (bIOP), and central corneal thickness (CCT) were measured by Corvis ST...

PURPOSE: To describe the biometric and corneal characteristics of patients with Marfan Syndrome (MFS) and ectopia lentis. STUDY DESIGN: Observational, descriptive, prospective study. Subjects Individuals with MFS with ectopia lentis (EL). METHODS: Fourty-four eyes of 23 patients underwent Scheimpflug analysis using the Pentacam (Oculus, Wetzlar, Germany), axial length (AL) using the IOL master 700 (Carl Zeiss AG, Oberkochen, Germany), endothelial cell count (ECC) using the CEM-350 (NIDEK, Maihama, Japan) and corneal biomechanics evaluation with the Ocular Response Analyzer: ORA (Reichert Ophthalmic Instruments, Buffalo, New York, USA) and Corvis (Oculus, Wetzlar, Germany)...

Fas-Associated protein with Death Domain (FADD), a key molecule controlling cell fate by balancing apoptotic versus non-apoptotic functions, is dysregulated in post-mortem brains of subjects with psychopathologies, in animal models capturing certain aspects of these disorders, and by several pharmacological agents. Since persistent disruptions in normal functioning of daily rhythms are linked with these conditions, oscillations over time of key biomarkers, such as FADD, could play a crucial role in balancing the clinical outcome...

BACKGROUND: Several studies have previously reported the normal values of corneal volume (CV) in various populations, whereas little is known about the CV distribution in healthy young Chinese adults. Our study aimed to investigate the distribution of CV and its relationships with other ocular biometric parameters among healthy young Chinese adults. METHODS: A total of 1645 eyes from 1645 students at Dali University in Yunnan Province, China, were analyzed. Pentacam was used to measure CV...

PURPOSE: The purpose of this study was to investigate corneal biomechanics in pellucid marginal degeneration (PMD) compared with healthy controls using Corvis ST (Oculus, Germany) by using the new biomechanical E-staging (based on the Corvis Biomechanical Factor, the linearized Corvis Biomechanical Index) together with tomographic parameters. METHODS: Corneal biomechanical and topographic data of 75 eyes of 75 patients with PMD and 75 eyes of 75 age-matched and sex-matched healthy controls were investigated...