Bio Fuels

This study evaluates the quality of 30 biomass pellets sold for residential use in Poland. It provides data on their physical, chemical, and petrographic properties and compares them to existing standards and the information provided by the fuel producers. The results reveal considerable variations in the quality of the pellets and show that some of the purchased samples are not within the DINplus and/or ENplus certification thresholds. Among all 30 purchased samples, only one passes the quality thresholds set by the PL-US BIO, a newly established quality certification in Poland that combines quality assessment following DINplus with optical microscopy analysis...

Owing to valuable significance of bioconvective transport phenomenon in interaction of nanoparticles, different applications are suggested in field of bio-technology, bio-fuels, fertilizers and soil sciences. It is well emphasized fact that thermal outcomes of nanofluids can be boosted under the consideration of various thermal sources. The aim of current research is to test the induction of induced magnetic force in bioconvective transport of non-Newtonian nanofluid. The rheological impact of non-Newtonian materials is observed by using Casson fluid with suspension of microorganisms...

The continuous expansion of the global vehicle fleet poses a growing threat to environmental quality through heavy metal contamination. In this scenario, monitoring to safeguard public health in urban areas is necessary. Our study involved the collection of 36 street dust and 29 moss samples from roads of a Brazilian metropolis (Recife) with varying traffic intensities as follows: natural reserve (0 vehicles per day), low (< 15,000 vehicles per day), medium (15,000-30,000 vehicles per day), and high (> 30,000 vehicles per day)...

Spillage from oil refineries, pipelines, and service stations consistently leads to soil, food and groundwater contamination. Bacterial-assisted phytoremediation is a non-invasive and sustainable solution to eliminate or decrease the concentration of xenobiotic contaminants in the environment. In the present study, a protected area interested by a fuel discharge was considered to assess a bioremediation intervention. From the spill point, a plume of contamination flowed South-West into the aquifer, eventually reaching a wetland area...

Synthesis of metal oxide nanomaterials using phytochemicals has now been regarded as mutually exclusive to chemical synthesis techniques. Here, we have extracted, isolated, and characterized the phytochemicals of Euphorbia cognata Boiss leaf hydro-organic extract and utilized them as biofuel in the preparation of metal oxide nanoparticles (CoO NPs). To evaluate the chemical composition of bio templates, chromatographic techniques like high-performance liquid chromatography (HPLC) and gas chromatography-mass spectroscopy (GC-MS) were being utilized...

The rapid exhaustion of fossil fuels and the ozone depletion caused by the excessive usage of the fossil fuels has prompted researchers to look towards bioinspired designs for both propulsion and energy extraction purposes. Limited amount of work has been done to present the effects of airfoil shape on the aerodynamic forces on flapping foils. In this paper, we examine in detail the effect of airfoil camber and its position on flapping foil performance in both energy extraction and propulsion regimes. We also examine the effect of reflex camber on flapping foil performance in both flow regimes...

This study aimed to optimize pyrolysis conditions to maximize bio-oil yield from cattle dung, a waste product of livestock practices. Pyrolysis of cattle dung was carried out in batch type reactor. The pyrolysis process was optimized using a central composite design in response surface methodology, with conversion parameters such as pyrolysis temperature, vapor cooling temperature, residence time, and gas flow rate taken into account. The cattle dung bio-oil was analyzed using gas chromatography/mass spectroscopy (GC/MS), an elemental analyzer, a pH probe, and a bomb calorimeter...

3D printing of a living bioanode holds the potential for the rapid and efficient production of bioelectrochemistry systems. However, the ink (such as sodium alginate, SA) that formed the matrix of the 3D-printed bioanode may hinder extracellular electron transfer (EET) between the microorganism and conductive materials. Here, we proposed a biomimetic design of a 3D-printed Shewanella bioanode, wherein riboflavin (RF) was modified on carbon black (CB) to serve as a redox substance for microbial EET. By introducing the medicated EET pathways, the 3D-printed bioanode obtained a maximum power density of 252 ± 12 mW/m2 , which was 1...

The challenge of drop-in jet biofuel should couple the reduction of GHGs emission in whole life cycle with economic competitiveness and achieving performance without reducing performance of engine and aircraft. Co-processing was recognized a promising solution due to availability of existing refining infrastructure and facilities. Based on the LCA approach, the quantitative LCA assessment model (AF-3E) has been established for discovering potential GHGs reduction by co-processing. Typical representatives of oily feedstock, including used cooking oil, soybean, rapeseed, peanut, corn oil, Xanthoceras sorbifolia, jatropha and algae, were compared co-processing with HEFA-SPK blend on GHGs and energy consumption in the whole life...

Utilizing monoalgal species for wastewater treatment is facing tremendous challenges owing to changing wastewater complexity in terms of physico-chemical characteristic, nutrient and metal concentration. The environmental conditions are also fluctuating therefore, the formation of robust system is of utmost importance for concomitant sustainable wastewater treatment and bioenergy production. In the present study, the tolerance and adaptability potential of algal consortia-1 (Chlorococcum humicola and Tetradesmus sp...

Dicarboxylic acid (DCA) is a multifaceted chemical intermediate, recoursed to produce many industrially important products such as adhesives, plasticizers, lubricants, polymers, etc. To bypass the shortcomings of the chemical methods of synthesis of DCA and to reduce fossil fuel footprints, bio-based synthesis is gaining attention. In pursuit of an eco-friendly sustainable alternative method of DCA production, microbial cell factories, and renewable organic resources are gaining popularity. Among the plethora of microbial communities, yeast is being favored industrially compared to bacterial fermentation due to its hyperosmotic and low pH tolerance and flexibility for gene manipulations...

Seeking low-cost and eco-friendly electrode catalyst of microbial fuel cell (MFC) reactor has received extensive attention in recent decades. In this study, a sludge MFC was coupled with biochar-modified-anode (BC-300, BC-400, and BC-500) for actual brewery wastewater treatment. The physicochemical properties of biochar largely depended on the pyrolysis temperature, further affecting the removal efficiency of wastewater indicators. BC-400 MFC proved to be efficient for TN and NH4 + -N removal, while the maximum removal efficiencies of COD and TP were achieved by BC-500 MFC, reaching respectively 97...

Methanol-gasoline blends have emerged as a promising and environmentally friendly bio-fuel option, garnering widespread attention and promotion globally. The methanol content within these blends significantly influences their quality and combustion performance. This study explores the qualitative and qualitative analysis of methanol-gasoline blends using Raman spectroscopy coupled with machine learning methods. Experimentally, methanol-gasoline blends with varying methanol concentrations were artificially configured, commencing with initial market samples...

The diminishing supply of fossil fuels, their detrimental environmental effects, and the challenges associated with the disposal of agro-waste necessitated the development of renewable and sustainable alternative energy sources. This study aims at developing bio-briquettes from Amaranthus hybridus waste, with cassava starch as a binder; both are agricultural wastes. Before and following delignification, alkali-treated Amaranthus hybridus (TAHB) and untreated (UAHB) briquettes were evaluated in terms of combustion and physicochemical parameters...

In recent years, the production of plastic has been estimated to reach 300 million tonnes, and nearly the same amount has been dumped into the waters. This waste material causes long-term damage to the ecosystem, economic sectors, and aquatic environments. Fragmentation of plastics to microplastics has been detected in the world's oceans, which causes a serious global impact. It is found that most of this debris ends up in water environments. Hence, this research aims to review the microbial degradation of microplastic, especially in water bodies and coastal areas...

Aggregation-induced electrochemiluminescence (AIECL) technology has aroused widespread interest due to the significant improve in ECL response by solving the problems of aggregation-caused quenching and poor water solubility of the luminophore. However, the existing AIECL emitters still suffer from low ECL efficiency, additional coreactants and complex synthesis steps, which greatly limit their applications. Herein, luminol, as a kind of AIE molecule, was assembled with Zn2+ nodes to obtain a novel microflower-like Zinc-luminol metal-organic gel (Zn-MOG) by one-step method...

The world has undergone a remarkable transformation from the era of famines to an age of global food production that caters to an exponentially growing population. This transformation has been made possible by significant agricultural revolutions, marked by the intensification of agriculture through the infusion of mechanical, industrial, and economic inputs. However, this rapid advancement in agriculture has also brought about the proliferation of agricultural inputs such as pesticides, fertilizers, and irrigation, which have given rise to long-term environmental crises...

Greenhouse gases (GHGs) emissions due to increasing energy demand have raised the need to identify effective solutions to produce clean and renewable energy. Biotechnologies are an effective platform to attain green transition objectives, especially when synergically integrated to promote health and environmental protection. In this context, microalgae-based biotechnologies are considered among the most effective tools for treating gaseous effluents and simultaneously capturing carbon sources for further biomass valorisation...

Bio-inspiration and biomimetics offer guidance for designing and synthesizing advanced catalysts for the oxygen reduction reaction (ORR) in microbial fuel cells (MFCs). Herein, a chlorine-doped Fe2 P supported by nitrogen-doped carbon (Cl-Fe2 P/NC) catalyst was designed and prepared based on imitating the bamboo structure. The electronegative chlorine captured the electron transfer from Fe2 P and transferred it to NC through carbon nanotubes (CNTs). The antibacterial chlorine inhibited the cathode biofilm formation to enhance the ion transport...

A simple, solvent-free arginine-catalyzed aldol dimerization of levulinic acid was achieved via the simultaneous formation of a eutectic mixture. Dimers of levulinic acid are valued as biomass-derived fine chemical precursors, with potential to upgrade to bio-jet fuels or N-containing functional chemicals. Typically, these dimers are produced as isomeric mixtures using high temperatures and a variety of solid inorganic catalysts or mineral acids. In this study, an organocatalytic and regioselective dimerization was achieved at 22% conversion on either a bench or kilogram scale using mild temperatures and only L-arginine as both a co-solvent and catalyst...