fume

To investigate the influence of COVID-19 lockdown measures on PM2.5 and its chemical components in Shenyang, PM2.5 samples were continuously collected from January 1 to May 31, 2020. The samples were then analyzed for water-soluble inorganic ions, metal elements, organic carbon, and elemental carbon. The findings indicated a significant decrease in PM2.5 and its various chemical components during the lockdown period, compared to pre-lockdown levels (p < 0.05), suggesting a substantial improvement in air quality...

BACKGROUND: Nitrogen dioxide (NO2 ) is known to cause lung injury, but there is no established treatment for acute respiratory distress syndrome (ARDS) caused by NO2 inhalation. CASE PRESENTATION: A 35-year-old man was accidentally exposed to NO2 fumes and presented to the emergency department. On admission, his oxygen saturation was 87% on ambient air and he was diagnosed with ARDS caused by NO2 inhalation and immediately intubated; however, hypoxemia and hypercapnia were not ameliorated...

Febrile conditions often have an infectious etiology. However, there are also fevers associated with occupational exposures. A detailed occupational history can hold the key to the diagnosis. In the case of exposure to organic dusts, the development of hypersensitivity pneumonitis (HP) is possible. Thus, HP should be considered in the presence of interstitial lung disease of unclear etiology. Failure to recognize this can have dramatic consequences and, in extreme cases, lead to lung transplantation. Differentially, organic dust toxic syndrome (ODTS) must be considered...

Health risks to humans after "fume and smell events", short-term incidents on aircrafts that are accompanied by unpleasant odour or visible smoke, remain a subject of controversy. We assessed exposure to volatile organic compounds (VOC) and organophosphorus compounds (OPC) by biomonitoring in 375 aircrew members after self-reported "fume and smell events" and in 88 persons of the general population. A total of 20 parameters were analysed in blood and urine by gas chromatography and mass spectrometry. Median levels of acetone in blood and urine and 2-propanol in blood were elevated in aircrews compared to controls (p < 0...

AIM: (1) To compare the temperature rise in the pulp chamber with different resin materials used for making provisional fixed partial dentures in anterior and posterior region while using Polyvinylsiloxane impression materials as matrix. (2) To identify a superior provisionalization material based on the amount of heat dissipated suitable for anterior and posterior provisional fixed partial denture fabrication. SETTINGS AND DESIGN: Temporary crowns and bridges are integral to Fixed Prosthodontics...

Although calcined clay-blended cement offers higher performance and durability compared to neat Portland cement (PC), its extensive use of natural clay leads to the depletion of natural non-renewable resources. To address this concern, this study focuses on the utilization of supplementary cementitious materials-based waste products as a substitute for PC. The blended cement was optimized with a low replacement level of 10 wt.% calcined Fanja clay (FNJ) as a low-grade metakaolin (MK) and 90 wt.% PC. Various types of industrial solid wastes (ISWs) were incorporated into the PC-FNJ blend in place of PC...

In recent years, as the installed scale of battery energy storage systems (BESS) continues to expand, energy storage system safety incidents have been a fast-growing trend, sparking widespread concern from all walks of life. During the thermal runaway (TR) process of lithium-ion batteries, a large amount of combustible gas is released. In this paper, the 105 Ah lithium iron phosphate battery TR test was conducted, and the flammable gas components released from the battery TR were detected. The simulation tests of the diffusion and explosion characteristics of lithium iron phosphate battery's (LFP) TR gases with different numbers and positions in the BESS were carried out using FLACS simulation software...

OBJECTIVE: To compare the long-term effectiveness of self-compassion therapy (SCT) combined with core stability exercise (CSE) versus CSE alone in managing nonspecific chronic low back pain (NCLBP). METHODS: The combined group received SCT and CSE, while the exercise group only received CSE. Treatment was administered once weekly for four weeks, followed by one year of follow-up. The primary outcomes were changes in functional limitations (measured by Roland and Morris Disability Questionnaire scores[RMDQ]) and self-reported back pain (measured by the Numeric Pain Rating Scale[NRS]) at 52 weeks, with assessments also conducted at 2, 4, and 16 weeks...

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused a worldwide COVID-19 pandemic, leading to 6.8 million deaths. Numerous variants have emerged since its outbreak, resulting in its significantly enhanced ability to spread among humans. As with many other viruses, SARS‑CoV‑2 utilizes heparan sulfate (HS) glycosaminoglycan (GAG) on the surface of host cells to facilitate viral attachment and initiate cellular entry through the ACE2 receptor. Therefore, interfering with virion-HS interactions represents a promising target to develop broad-spectrum antiviral therapeutics...

Large-scale cement production generates significant amounts of carbon dioxide from the breakdown of limestone, contributing to environmental pollution. Clean production of eco-friendly three-dimensional geopolymers can be used as environmentally friendly building materials. Replacing Portland cement with eco-friendly materials correlates with reduced energy consumption, costs, and negative environmental impact. In addition, geopolymer cement has above-average physical and chemical properties, which in many cases exceed conventional Portland cement...

The application of high-performance rubber nanocomposites has attracted wide attention, but its development is limited by the imbalance of interface and network effects caused by fillers. Herein, an ultrastrong polymer nanocomposite is successfully designed by introducing a superhydrophobic and mesoporous silica aerogel (HSA) as the filler to poly(methyl vinyl phenyl) siloxane (PVMQ), which increased the PVMQ elongation at break (∼690.1%) by ∼9.3 times and the strength at break (∼6.6 MPa) by ∼24...

The present global environment is facing growing issues linked to production of concrete, mostly due to high consumption of concrete as the dominating construction material globally. In today's climate of environmental sustainability, recycled concrete production using RA (recycled aggregates) requires a more holistic approach. This study examined how recycled aggregate (RA), metakaolin, silica fume and fly ash affect mechanical characteristics (compressive strength, split tensile strength), and durability characteristics (acid resistance, absorption, sorptivity) of concrete...

Occupational exposure to manganese (Mn) primarily occurs through the inhalation of manganese-containing fumes and dust, with welding environments being significant sources of such exposure. Elevated levels of Mn in welding fumes can lead to a neurological syndrome known as manganism. A 28-yr-old male welder with 14 yr of experience, is presenting with complaints of forgetfulness, reasoning disorder, and decreased mental functions persisting for 10 yr. Three months ago, when he started working at the new workplace, he underwent employment screening conducted by the workplace physician...

Although several occupational exposures have been linked to the risk of COPD; limited data exists on sex-specific differences. This study aimed to identify at-risk occupations and sex differences for COPD risk. Cases were identified in a large surveillance system established through the linkage of former compensation claimants' data (non-COPD claims) to physician visits, ambulatory care data, and hospital inpatient data (1983-2020). Cox proportional hazard models were used to estimate hazard ratios (HRs) and corresponding 95% confidence intervals (CI) for occupation groups (occupation at time of claim), stratified by sex...

The precise manipulation of supramolecular polymorphs has been widely applied to control the morphologies and functions of self-assemblies, but is rarely utilized for the fabrication of circularly polarized luminescence (CPL) materials with tailored properties. Here, this work reports that an amphiphilic naphthalene-histidine compound (NIHis) readily self-assembled into distinct chiral nanostructures through pathway-dependent supramolecular polymorphism, which shows opposite and multistimuli responsive CPL signals...

OBJECTS: This study aims to explore the etiology of peri-implantitis by comparing the metabolic profiles in peri-implant crevicular fluid (PICF) from patients with healthy implants (PH) and those with peri-implantitis (PI). MATERIALS AND METHODS: Fifty-six patients were enrolled in this cross-sectional study. PICF samples were collected and analyzed using both non-targeted and targeted metabolomics approaches. The relationship between metabolites and clinical indices including probing depth (PD), bleeding on probing (BOP), and marginal bone loss (MBL) was examined...

Hydrogel-based flexible electronic devices serve as a next-generation bridge for human-machine interaction and find extensive applications in clinical therapy, military equipment, and wearable devices. However, the mechanical mismatch between hydrogels and human tissues, coupled with the failure of conformal interfaces, hinders the transmission of information between living organisms and flexible devices, which resulted in the instability and low fidelity of signals, especially in the acquisition of electromyographic (EMG) and electrocardiographic (ECG) signals...

INTRODUCTION: Following the conservation of resource theory and natural stress reduction theory, the current study investigated mediated pathways, reverse mediated pathways, and reciprocal pathways between connectedness to nature, depressive symptoms, and adolescent learning burnout via a half-longitudinal analysis, and discussed gender differences in the three models. METHODS: Two waves of data were collected in December 2022 (T1) and June 2023 (T2) for this study...

The development of modern construction and transportation industries demands increasingly high requirements for thin, lightweight, high-strength, and highly tough composite materials, such as metal carbides and concrete. Bamboo is a green, low-carbon, fast-growing, renewable, and biodegradable material with high strength and toughness. However, the density of its inner layer is low due to the functional gradient (the volume fraction of vascular bundles decreases from the outer layer to the inner layer), resulting in low performance, high compressibility, and significant amounts of bamboo waste...

Glacier surges, a primary factor contributing to various glacial hazards, has long captivated the attention of the global glaciological community. This study delves into the dynamics of Kyagar Glacier surging and the associated drainage features of its Ice-dammed lake, employing high temporal resolution optical imagery. Our findings indicate that the surge on Kyagar Glacier began in late spring and early summer of 2014 and concluded during the summer of 2016. This surge resulted in the transfer of 0.321 ± 0...