Sulfur chemiluminescence

Multiple analytical methodologies allow quantitation of H2 S and methanethiol (MeSH) in wine, but confirmation that the determined concentrations are related to perceived off-aromas, or "reductive" faults, is yet to be provided. Fifty white wines underwent sensory evaluation and measurement of free and salt-treated H2 S and MeSH concentrations by gas chromatography with sulfur chemiluminescence detection and/or gas detection tubes. The determined concentrations were compared across techniques and different analysis laboratories...

The dye-doped silica nanoparticles-based electrogenerated chemiluminescence (ECL) has been widely explored for analytical purposes due to its high sensitivity, simplicity and wide dynamic concentration range. However, only a few of dye molecules located at the near surface of nanoparticles can participate in the ECL reaction due to the poor conductivity of silica nano-matrix. In addition, the ECL signal is easy to be affected by environmental interference, which results in poor accuracy. Herein, a ratiometric ECL sensing method is established based on the electrochemically controlled release of lucigenin molecules from silica/chitosan/lucigenin composite nanoparticles (Lu/CS NPs) with the aid of sulfide ions...

In the late 1970s, sulfane sulfur was defined as sulfur atoms covalently bound only to sulfur atoms. However, this definition was not generally accepted, as it was slightly vague and difficult to comprehend. Thus, in the early 1990s, it was defined as "bound sulfur," which easily converts to hydrogen sulfide upon reduction with a thiol-reducing agent. H2 S-related bound sulfur species include persulfides (R-SSH), polysulfides (H2 Sn, n ≥ 2 or R-S(S)n S-R), and protein-bound elemental sulfur (S0 )...

Balsam sulfide, produced by the reaction of turpentine/rosin and sulfur, has been used as one of the raw materials of liquid gold to decorate ceramics and tableware with thin gold film for more than 100 years. The characterization of balsam sulfide is still insufficient because of its compositional complexity. In this study, balsam sulfide was characterized using pyrolysis-gas chromatography (Py-GC)-mass spectrometry (MS) and Py-GC with sulfur chemiluminescence detection (SCD) as well as matrix-assisted laser desorption/ionization time-of-flight MS (MALDI-TOFMS)...

In this work, a novel photo-chemiluminescence (PCL) array imaging technique was developed to detect HIV DNA sequences using water-dispersed ultrathin sulfur-doped g-C3 N4 porous nanosheets (SCNNSs) as photocatalysts, with complementary chains of HIV DNA as the biorecognition elements. The PCL response was enhanced when a suitable amount of SCNNSs was used. The large specific surface area and π-conjugated structure of the SCNNSs provided a good platform for immobilizing the complementary chains of HIV DNA...

Next generation chemiluminescent iridium 1,2-dioxetane complexes have been developed which consist of the Schaap's 1,2-dioxetane scaffold directly attached to the metal center. This was achieved by synthetically modifying the scaffold precursor with a phenylpyridine moiety, which can act as a ligand. Reaction of this scaffold ligand with the iridium dimer [Ir(BTP)2 (μ-Cl)]2 (BTP = 2-(benzo[ b ]thiophen-2-yl)pyridine) yielded isomers which depict ligation through either the cyclometalating carbon or, interestingly, the sulfur atom of one BTP ligand...

Intertidal permeable sediments are crucial sites of organic matter remineralization. These sediments likely have a large capacity to produce reactive oxygen species (ROS) because of shifting oxic-anoxic interfaces and intense iron-sulfur cycling. Here, we show that high concentrations of the ROS hydrogen peroxide are present in intertidal sediments using microsensors, and chemiluminescent analysis on extracted porewater. We furthermore investigate the effect of ROS on potential rates of microbial degradation processes in intertidal surface sediments after transient oxygenation, using slurries that transitioned from oxic to anoxic conditions...

Sulfur dioxide (SO2 ) as one kind of air pollution not only causes extreme environmental pollution but also negatively affects human health. Chemiluminescence (CL) methods applied for sulfite analysis with high selectivity based on activating sulfite with oxidants are always implemented in acid media with a high background rise. In this work, we proposed to develop a mild CL system of Fe2+ -SO3 2- to detect sulfite under neutral conditions and provide in situ CL spectral data for deeply studying the CL mechanism of Fe2+ -SO3 2- ...

Graphene quantum dots (GQDs), as one of the most promising luminescent nanomaterials, have been receiving increasing attention in various applications. However, it is still a challenge to improve their chemiluminescence (CL) quantum efficiency. Herein, the CL emissions of nitrogen- and sulfur-doped GQDs (NS-GQDs), nitrogen-doped GQDs (N-GQDs) and undoped GQDs synthesized through one-pot high-temperature pyrolysis are investigated in their chemical reactions with bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate (CPPO) and hydrogen peroxide (H2 O2 )...

A novel flow injection-chemiluminescence (FI-CL) approach is proposed for the assay of pioglitazone hydrochloride (PG-HCl) based on its enhancing influence on the tris(2,2'-bipyridyl)ruthenium (II)-silver (III) complex (Ru (bipy)3 2+ -DPA) CL system in sulfuric acid medium. The possible CL reaction mechanism is discussed with CL and UV spectra. The optimum experimental conditions were found as: Ru (bipy)3 2+ , 5.0×10-5 M; H2 SO4 , 1.0×10-3 M; DPA, 1.0×10-4 M; KOH, 1.0×10-3 M; flow rate 4...

Oil spills are a severe problem worldwide due to the resulting damage to marine and coastal ecosystems and to local economies. Identification of the source of spilled oils can be challenging, especially if the oils have undergone severe weathering. Due to their high durability, biomarker compounds (e.g. hopanes, steranes) are widely used for oil fingerprinting. Some sulfur-containing heterocyclic compounds e.g. alkylated dibenzothiophenes are also considered to be highly resistant. In this study, the use of Gas Chromatography with Sulfur Chemiluminescence Detection was investigated as a means of oil fingerprinting using the distribution the sulfur compounds in five different fresh and weathered crude oils...

A simple flow injection (FI) method based on diperiodatonickelate (IV)-sulfuric acid (DPN-H2 SO4 ) reaction with chemiluminescence (CL) detection is developed for the determination of thiram (THI) fungicide in freshwaters using quinine as the sensitizer. The possible mechanism of the CL reaction is described by using UV-Vis absorption and CL spectra. Experimental variables are optimized applying univariate approach and a linear calibration curve was obtained in the range of 1.0 × 10-3 -2.0 mg L-1 (R2 = 0.9994, n = 9) with a limit of detection (LOD) of 5...

The monitoring of Pb as a hazardous heavy metal element for the environment and human health is of high importance. In this study, a simple and sensitive chemiluminescence (CL) probe based on sulfur quantum dots (SQDs) was designed for the determination of Pb2+ . To the best of our knowledge, this is the first report on the analytical application of the CL method based on SQDs. For this purpose, SQDs were synthesized using a simple hydrothermal method and characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction...

In this study, an electro-Fenton-like method in the presence of iron particles was used for degradation of toxic thiophene pollutant from aqueous samples with performance >99%. In an electrolytic reactor, the effect of current density, H2 O2 dosage, and pH of the sample on the treatment efficiency was investigated and optimized using the response surface method in the experimental design methodology. The conditions were optimized in current density of 20 mA/cm2 , H2 O2 dosage 500 ppm and pH = 3.0...

Cu in wine can suppress sulfidic-odours, but the active forms and duration of protection are uncertain. Additions of 0, 0.3 or 0.6 mg/L Cu(II) were made to Chardonnay and Pinot Grigio at bottling. Throughout a 12- or 14-month storage period, Cu fractions were determined by colorimetry, and sulfhydryl compounds by gas chromatography with sulfur chemiluminescence detection. After Cu(II) addition, the dominant Cu fractions were associated with Cu(II)-organic acids (fraction I) and Cu(I)-thiol complexes (fraction II), and over 8-months their concentrations gradually fell below 0...

Volatile sulfur compounds (VSCs) are key odorous compounds from emissions of various odour sources because they are odorous and generally have very low odour threshold values. Identification and quantification of them through air server-thermal desorber-gas chromatography-sulfur chemiluminescence detector (AS-TD-GC-SCD) become more and more popular, although VSCs can be determined by other detectors. To find a valid, practical and quick calibration method is also an important step in their analytical processes...

Cannabis sativa L. produces over 200 known secondary metabolites that contribute to its distinctive aroma. Studies on compounds traditionally associated with the scent of this plant have focused on those within the terpenoid class. These isoprene-derived compounds are ubiquitous in nature and are the major source of many plant odors. Nonetheless, there is little evidence that they provide the characteristic "skunk-like" aroma of cannabis . To uncover the chemical origins of this scent, we measured the aromatic properties of cannabis flowers and concentrated extracts using comprehensive two-dimensional gas chromatography equipped with time-of-flight mass spectrometry, flame ionization detection, and sulfur chemiluminescence...

Volatile sulfur compounds (VSCs) are important sources of unpleasant odours in biosolid emissions. However, the study of VSCs may be limited by complications in their gas phase measurements due to reactivity, transformations and varying reported odour detection thresholds. A range of methods were used to quantitatively analyse VSCs in wastewater biosolid emissions. VSCs were identified in aged biosolid emissions by gas chromatography (GC) with a sulfur chemiluminescence detector (SCD) and mass spectrometry coupled with olfactory detection port (MS/O)...

Volatile thiols are important aroma components of rapeseed oil. This study established an identification and quantification method of volatile thiols via headspace solid-phase microextraction and gas chromatography-sulfur chemiluminescence detection. Four thiols (phenylmethanthiol, 3-sulfanyl-1-hexanol, 2-methyl-3-furanthiol, and 2-furylmethanthiol) were newly identified in microwaved rapeseed oil, and cause sesame, roasted meat, and garlic odors. The total concentration of the four thiols in rapeseed oil obtained from 13 rapeseed varieties ranged from 11...

Biologically active compounds containing sulfhydryl groups (RSHs: N-acetyl-l-cysteine, d-penicillamine, glutathione and acetylthiocholine chloride) were used to develop a luminometric method for their quantification. The title substrate capable of chemiluminescence (CL) was isolated in a highly pure state as a chloride salt (99.9% using RP-HPLC) and identified using mass spectrometry (ESI Q-TOF) and 1 H NMR spectroscopy. The cation included in the salt, 9-CMA+ , underwent oxidation in an alkaline environment containing RSHs by molecular oxygen, generating CL of various intensities, with no need for the use of hydrogen peroxide...