Importance of Exposure Duration and Metrics on Correlation between RF Energy Absorption and Temperature Increase in a Human Model.

OBJECTIVE: This study investigated the influence of absorption metrics and averaging schemes on correlation between RF/microwave energy and induced temperature elevation for plane wave exposures.

METHODS: A voxel-based, anatomically realistic model of the human body was considered. Correlation of electromagnetic fields and temperature increases were evaluated at several frequencies. Both Specific Absorption Rate (SAR) and Volume Absorption Rate (VAR) were considered.

RESULTS: The best correlation with temperature increase occurs for exposure durations between 1 and 2 min both for SAR and VAR for most of the 700- to 2700-MHz frequencies considered. In this case, a 1-g mass or 1-cm3 volume appears to be optimal. However, for VAR, as frequency increases to above 900 MHz, a better correlation is achieved at slightly increased exposure times and volumes. For longer exposures, the maximum correlation coefficient is reduced, and the correlation favors larger averaging mass or volume. At steady-state (30 min), correlation of temperature increase with SAR is maximum for a mass of 9 g for all frequencies considered, whereas the volume for VAR maximum correlation is 15 cm3 for higher frequencies and 20 cm3 for lower frequencies.

CONCLUSIONS: In general, SAR provides a better correlation with temperature compared to VAR for short exposures, while VAR renders better correlations for higher frequencies and longer exposures.

SIGNIFICANCE: The correlation between electromagnetic absorption and temperature increases has implications in guidelines for limiting human exposure to electromagnetic fields and in biomedical applications such as imaging, sensing, and hyperthermia.