From conventional activated sludge to alternate oxic/anoxic process: the optimisation of winery wastewater treatment.

The paper deals with the results obtained as nitrogen removal and energy savings in a wastewater treatment plant located in the Province of Trento where the vineyards grow on about 1,500 ha (19% of total vineyards of the Province). In the plant the municipal and pre-treated winery wastewater were co-treated. The optimal effluent quality and the reduction of energy consumption were achieved changing the total oxidation process to an alternate cycles (AC) one and applying a remote control system for three months. The characterization of the influent highlighted a remarkable variability of the mass loads mainly determined by the cyclic winemaking periods. The AC application allowed the system to cope with the intense variations of influent nitrogen loadings and to obtain a stable quality of the effluent with an average TN concentration less than 10 mg NL(-1). The nitrogen loading rate (NLR) up to 0.227 Kg TN m(-3) d(-1) was tolerated by the elevated AC control level device to assure successful denitrification performances (from 70% to 90%) also in conditions of COD/TN lower than 7. Comparing the AC with the pre AC conditions, a total energy saving in the range of 13-23% was estimated. Moreover, the specific energy consumptions were reduced to 59% despite the increment of the influent mass loadings.