Hydrodynamic characteristics of bileaflet mechanical heart valves in an artificial heart: cavitation and closing velocity.

The aim of this study was to investigate the possibility of using the bileaflet valves in an electrohydraulic total artificial heart (EHTAH). Three kinds of bileaflet valves, namely the ATS valve (ATS Medical Inc., Minneapolis, MN, USA), the St. Jude valve (St. Jude Medical Inc., St. Paul, MN, USA), and the Sorin Bicarbon valve (Sorin Biomedica, Vercelli, Italy), were mounted in the mitral position on an inclined 45 degrees plane in an EHTAH. The pressure waves near the valve surface, the valve-closing velocity, and a high-speed camera were employed to investigate the mechanism for bileaflet valve cavitation. The cavitation bubbles in the bileaflet valves were concentrated along the leaflet tip. The cavitation intensity increased with an increase in the valve-closing velocity. It was established that squeeze flow holds the key to bileaflet valve cavitation. At lower heart rates, the delay time of the asynchronous closure motion between the two leaflets of the Sorin Bicarbon valve was greater than that of the other bileaflet valves. At higher heart rates, no significant difference was observed among the bileaflet valves.