Anaerobic treatment of pre-hydrolysate liquor (PHL) from a rayon grade pulp mill: pilot and full-scale experience with UASB reactors.

Pilot studies were carried out for the treatment of pre-hydrolysate liquor (PHL), a high strength effluent (COD: 70,000-80,000 mg/l) emanating from a rayon grade pulp mill using up-flow anaerobic sludge blanket reactor (UASB). Substrate inhibition was avoided with optimum COD feed of around 25,000 mg/l. This was achieved by diluting the PHL with a low strength effluent stream known as alkali back wash (ABW) available in the plant and also by partially recycling the reactor liquid outlet. An optimum organic loading rate (OLR) of 10 could be achieved with a COD reduction of 70-75%, a BOD reduction of 85-90% and a methane yield of 0.31-0.33 m3/kg of COD reduced. The pilot scale studies also revealed that addition of milk of lime (MOL) was essential for neutralization and buffering and DAP and urea to supplement the nutrients in the PHL. Based on the pilot studies, a full-scale high rate biomethanation plant was designed and erected for treating the PHL, which after some modification showed similar performance for COD, BOD reduction and methane yield.