sclerosing foam

PURPOSE: To explore the DSA classification and treatment strategy of tongue venous malformation. METHODS: From February 2016 to February 2019, the DSA manifestations of 132 cases with venous malformations of the tongue were summarized. They were classified into 4 types according to imaging characteristics: typeⅠ(non-drainage type), typeⅡ(lower- drainage type), type Ⅲ (higher-drainage type), type Ⅳ(extensive type). Different therapeutic schemes were selected according to the types...

OBJECTIVE: Puig types 2 through 4 venous malformations (VMs) are challenging to treat with sclerotherapy given their robust systemic outflow. Endovenous balloon occlusion offers a means of temporarily occluding systemic venous outflow to allow for more complete sclerotherapy. This study reviews our experience of implementing this technique in patients with Puig advanced (types 2 through 4) VMs. METHODS: An IRB approved review of treated venous malformations from 2013-2016 revealed 10 patients fitting inclusion criteria...

INTRODUCTION: Several treatment modalities have been postulated to improve the efficacy of varicose vein treatment. Addition of glycerine to the sclerosing material has been documented to increase its viscosity and subsequently prolong the duration of stability, in addition to the direct sclerosing effect of glycerine. This histological and immunohistochemical study investigated the efficacy of addition of glycerine 72% to sclerotherapy on the human varicose vein. METHODS: After surgical stripping of great saphenous veins, three equal segments were resected between two clamps...

OBJECTIVES: The objective of our study was to develop an optical method that instantly evaluates the stability of sclerosing foam, which would enable early predictions of the clinical performance of the foam and reduce the occurrence of clinical side effects. METHODS: Based on the principle of light scattering, we developed a method to optically test foam stability and verified it experimentally using sodium morrhuate (2 mL; 0.05 g/mL) and carbon dioxide. A self-made foam preparation instrument was used to achieve a preparation speed of 275 mm/s...

AIMS: An increasing number of small pulmonary nodules are being screened by CT, and an intraoperative diagnosis is necessary for preventing excessive treatment. However, there is limited literature on the frozen diagnosis of small sclerosing pneumocytomas (SPs). In particular, tumours smaller than 1 cm are challenging for pathologists performing intraoperative frozen diagnosis. METHODS: In total, 230 cases of SP were surgically resected between January 2015 and March 2019 at Shanghai Chest Hospital, and of them, 76 cases were smaller than 1 cm...

OBJECTIVES: To determine the effect of liquid gas fraction (LGF), sclerosant type and concentration, and filter use on foam bubble size and count. METHODS: Sclerosant foam microstructure was investigated using light microscopy for a range of LGFs (1 + 2, 1 + 4 and 1 + 8), for both sodium tetradecyl sulphate (STS) and polidocanol (POL), at a range of concentrations (0.5-3%), with and without the addition of micro-filters. Foam was generated using a modified Tessari method and placed into wells for analysis by light microscopy...

PURPOSE: To investigate if the detergent sclerosant sodium tetradecyl sulfate (STS) is deactivated by the lipid-based contrast agent ethiodised oil. METHOD: 3% STS was mixed with ethiodised oil and room air in a 2:1:4 ratio in two luer lock syringes and a three way connector and agitated to make foam (the Tessari technique) to replicate the clinical use of the products. The assay of STS in the mixture was assessed using the British Pharmacopoeia method. Briefly this is a manual titration method where the solution of STS is mixed with an indicator solution and titrated with hyamine solution of known concentration; the concentration of the STS can then be calculated with the titration results...

Sclerotherapy is the chemical occlusion of vessels using an intravenous injection of a liquid or foamed sclerosing agent that is used in the therapy of blood and lymphatic vessels malformations in the young, and for spider veins, smaller varicose veins, hemorrhoids and hydroceles in adults. This study aimed to assess the effectiveness of mechanosclerotherapy of venous veins with a new device-Flebogrif® -based on an animal model. The experiment was performed on nine Polish Merino sheep weighing 40-50 kilograms...

Polycystic kidney disease (PKD) is a common genetic disorder that results in a proliferating and enlarging cyst and ultimately leads to loss of kidney function. Because an enlarged cyst is a primary factor for limited kidney function, the large cyst is surgically removed by laparoscopic deroofing or sclerosant. This a relatively nascent treatment method entails complications and sometimes fail due to the cyst fluid refilling and infection. This study proposes using a more stable and effective polidocanol foam with glycerol and Rose Bengal (GRP form) to prevent cyst regeneration and irritation, which is caused by the required body movement during the treatment...

Presented in the article is a prospective study of endovascular embolization of ovarian veins in female patients suffering from primary pelvic varicose veins, with the assessment of the immediate and remote results, as well as a 1-year follow up. AIM: The aim of our investigation was a comprehensive clinical and instrumental assessment of efficacy of endovascular embolization in women with pelvic varicose veins. PATIENTS AND METHODS: Our single-centre study included a total of 29 female patients presenting with pelvic varicose veins and undergoing embolization of ovarian veins using microcoils, in 5 cases the procedure was supplemented with injecting a foam sclerosant...

OBJECTIVES: Little is known how calibre and length of needles affect the stability of sclerosing foam. METHODS: Foams were made of 0.5%, 1%, 2% and 3% polidocanol, and 0.2%, 0.5%, 1% and 3% sodium tetradecyl sulfate (STS), which were mixed with air in the proportion of 4:1. These foams were ejected through needles with the length of: 4 mm, 6 mm and 13 mm, and diameter of: 0.26 mm, 0.3 mm and 0.4 mm. RESULTS: Foams made of more concentrated polidocanol were more stable...

BACKGROUND: The Triplex method is a three-step treatment approach to reducing the appearance of small and medium-sized varicose veins and phlebological imperfections of the lower limbs. OBJECTIVE: This study evaluated the effectiveness, duration of results, adverse events, patient satisfaction, and improvements in quality of life in patients with small and medium-sized varicose veins who were treated with the Triplex method. METHODS: We conducted a six-year follow-up study of 4,000 patients from the years 2012 to 2018...

The use of foams to deliver bioactive agents and drugs is increasing in pharmaceutics. One example is the use of foam as a delivery system for polidocanol (POL) in sclerotherapy, with the addition of bioactive compounds to improve the delivery system being a current subject of study. This work shows the influence of two bioactive additives on the structure and stability of POL foam: hyaluronic acid (HA) and Pluronic-F68 (F68). HA is a natural non-surface-active biopolymer present in the extracellular matrix while F68 is a surface-active poloxamer that is biocompatible with plasma-derived fluids...

OBJECTIVE: The combination of endovenous therapies with stab avulsion or ultrasound guided foam sclerotherapy is widely performed. However, these conventional techniques tend to result in incomplete avulsions or persistent varicosities. METHODS: One hundred and thirteen legs in 97 consecutive patients who underwent 1470 nm laser ablation for great saphenous varicose veins were enrolled. The foam sclerosing agent was injected via the sheath after endovenous laser ablation (EVLA)...

OBJECTIVE: To compare the efficacy and safety of sclerosing agents injected in dorsal veins of rabbit ears. METHODS: Sixty ears of 30 rabbits were randomly allocated in: 1% liquid polidocanol, 1% polidocanol foam, 0.2% polidocanol-glucose 70% solution, glucose 75% or 0.9% saline. Outcomes included efficacy (luminal occlusion), complications (phlebitis, neovascularization, ulceration at the puncture site, necrosis and local inflammation) and histology (sclerosis, recanalization vein and surrounding tissues inflammation, blood extravasation, recanalization, lymphangiogenesis, destruction of cartilage and neoangiogenesis)...

BACKGROUND: The Tessari method, mixing air with the sclerosant through a 3-way tap and 2 syringes, is the most widely used method to prepare foam in foam sclerotherapy. Uniform foam with smaller bubbles has great clinical significance for venous insufficiency. We aim to modify the traditional 3-way tap to produce more uniform and stable foam with smaller bubbles. METHODS: The traditional 3-way tap was modified by inserting a porous film within its channel. EXPERIMENT DESIGN: the foam was prepared with 2 mL polidocanol plus 8 mL air plus 0...

BACKGROUND: Venous leg ulcers (VLUs) are common throughout the world, which seriously affects the patient's work and life. Relevant researches suggested that sclerosing foam (SF) has potential benefits for VLUs. However, there is no consistent conclusion. The purpose of our study is to assess whether SF is effective and safe for VLUs. METHODS: Relevant clinical randomized controlled trials will be obtained from a search of 8 databases (with no language restrictions) from their inception to May 2020: PubMed, the Cochrane Library, EMBASE, Web of Science, China National Knowledge Infrastructure Database, Wanfang Database, China Science and Technology Journal Database, and Chinese Biological Medicine...

BACKGROUND: Foam sclerotherapy is an effective treatment strategy for venous malformations. Both polidocanol (POL) and bleomycin are effective sclerosants; however, no studies have reported POL-bleomycin foam. OBJECTIVE: To introduce a method for producing POL-bleomycin foam and evaluate the stability of POL-bleomycin foam with bleomycin concentrations. MATERIALS AND METHODS: Group A: 2 mL of 1% POL + 8 mL of air; Group B: 2 mL of 1% POL + 3 U bleomycin + 8 mL of air; Group C: 2 mL of 1% POL + 6 U bleomycin + 8 mL of air; Group D: 2 mL of 1% POL + 12 U bleomycin + 8 mL of air...

Nonparasitic splenic cysts often cause nonspecific symptoms such as pain or early satiety. As it is relatively rarer than hepatic cysts, no established treatment exists for splenic cysts. A 24-year-old woman with a complaint of abdominal discomfort was referred to our hospital. Computed tomography revealed an 11-cm diameter splenic cyst, thought to be the cause of her symptom. Sclerotherapy was performed using polidocanol foam, administered at a volume of 40 mL through a catheter, under local anesthesia. After 2 sessions, the cyst measured 5 cm in diameter, 3 months after the first treatment...

OBJECTIVES: To determine the quality of sclerosant foam produced with an automated preparation system with multiple combinations of sclerosing agents, gases, and device settings. METHODS: Single-use mixing capsules filled with air or O2 /CO2 and polidocanol (0.25, 1, or 3%) or sodium tetradecyl sulfate (0.2 or 1%) were coupled to a customized magnetic stirrer. Stirring speed and time were adjusted between 1500 and 4000 r/min and 30 and 60 s, respectively, and characteristics of the foam produced were measured: half-life, bubble diameter, and gas-to-liquid ratio...