three dimensional morphology

Three-dimensional (3D) bioprinting is a fast prototyping fabrication approach that allows the development of new implants for tissue restoration. Although various materials have been utilized for this process, they lack mechanical, electrical, chemical, and biological properties. To overcome those limitations, graphene-based materials demonstrate unique mechanical and electrical properties, morphology, and impermeability, making them excellent candidates for 3D bioprinting. This review summarizes the latest developments in graphene-based materials in 3D printing and their application in tissue engineering and regenerative medicine...

Introduction Collagen synthesis is vital for restoring musculoskeletal tissues, particularly in tendon and ligamentous structures. Tissue engineering utilizes scaffolds for cell adhesion and differentiation. Although synthetic scaffolds offer initial strength, their long-term stability is surpassed by biological scaffolds. Combining polycaprolactone (PCL) toughness with collagen in scaffold design, this study refines fabrication via electrospinning, aiming to deliver enduring biomimetic matrices for widespread applications in musculoskeletal repair...

The biological mechanisms regulating tenocyte differentiation and morphological maturation have not been well-established, partly due to the lack of reliable in vitro systems that produce highly aligned collagenous tissues. In this study, we developed a scaffold-free, three-dimensional (3D) tendon culture system using mouse tendon cells in a differentially adherent growth channel. Transforming Growth Factor-β (TGFβ) signaling is involved in various biological processes in the tendon, regulating tendon cell fate, recruitment and maintenance of tenocytes, and matrix organization...

An impact polypropylene copolymer (IPC), composed of polypropylene (PP) and ethylene-propylene copolymer (EPC), was synthesized through two-stage in-reactor polymerization. A systematic investigation of the crystalline structure, thermal behavior, morphology, and tensile properties of the IPC extruded cast film was conducted. Specifically, the morphology of EPC was obtained by confocal Raman imaging by depicting the spatial distribution of the Raman band located at 1064 cm-1 . The EPC phase exhibits fibrous morphology with the long axis aligning along the machine direction (MD)...

It is of great significance to study the plant morphological structure for improving crop yield and achieving efficient use of resources. Three dimensional (3D) information can more accurately describe the morphological and structural characteristics of crop plants. Automatic acquisition of 3D information is one of the key steps in plant morphological structure research. Taking wheat as the research object, we propose a point cloud data-driven 3D reconstruction method that achieves 3D structure reconstruction and plant morphology parameterization at the phytomer scale...

Cerebral amyloid angiopathy (CAA) is a vasculopathy characterized by vascular β-amyloid (Aβ) deposition on cerebral blood vessels. CAA is closely linked to Alzheimer's disease (AD) and intracerebral hemorrhage. CAA is associated with the loss of autoregulation in the brain, vascular rupture, and cognitive decline. To assess morphological and molecular changes associated with the degeneration of penetrating arterioles in CAA, we analyzed post-mortem human brain tissue from 26 patients with mild, moderate, and severe CAA end neurological controls...

In simple terms, consciousness is constituted by multiple goals for action and the continuous adjudication of such goals to implement action, which is referred to as the maps of meaning (MoM) consciousness theory. The MoM theory triangulates through three parallel corollaries: action (behavior), mechanism (morphology/pathophysiology), and goals (teleology). (1) An organism's consciousness contains fluid, nested goals. These goals are not intentionality, but intersectionality, via the Darwinian byproduct of embodiment meeting the world, i...

OBJECTIVE: Left ventricular (LV) mechanical dyssynchrony (LVMD) is fundamental to the progression of heart failure and ventricular remodeling. The status of LVMD in different patterns of bundle branch blocks (BBB) is unclear. In this study, we analyzed the relationship between LVMD and left ventricular systolic dysfunction using real-time three-dimensional echocardiography (RT-3DE). METHODS: RT-3DE and conventional two-dimensional echocardiography were performed on 68 patients with left bundle branch block (LBBB group), 106 patients with right bundle branch block (RBBB group), and 103 patients without BBB (Normal group)...

Three-dimensional (3D) organoid models have been instrumental in understanding molecular mechanisms responsible for many cellular processes and diseases. However, established organic biomaterial scaffolds used for 3D hydrogel cultures, such as Matrigel, are biochemically complex and display significant batch variability, limiting reproducibility in experiments. Recently, there has been significant progress in the development of synthetic hydrogels for in vitro cell culture that are reproducible, mechanically tuneable, and biocompatible...

Using aqueous two-phase systems (ATPSs) for three-dimensional (3D) printed complex structures has attracted considerable attention in the field of biomedicine. In this study, we present an unusual approach to constructing reconfigurable 3D printed structures within an aqueous environment. Inspired by biological systems, we introduce both specific and nonspecific interactions to anchor functionalized nanoparticles to the water-water interface, thereby imparting adaptive dual locks of structural integrity and permeability to the 3D printed liquid structures...

Bile infarct is a pivotal characteristic of obstructive biliary disease, but its evolution during the disease progression remains unclear. Our objective, therefore, is to explore morphological alterations of the bile infarct in the disease course by means of multiscale X-ray phase-contrast CT. Bile duct ligation is performed in mice to mimic the obstructive biliary disease. Intact liver lobes of the mice are scanned by phase-contrast CT at various resolution scales. Phase-contrast CT clearly presents three-dimensional (3D) images of the bile infarcts down to the submicron level with good correlation with histological images...

The advent of micro-physiological systems (MPS) in biomedical research has enabled the introduction of more complex and relevant physiological into in vitro models. The recreation of complex morphological features in three-dimensional environments can recapitulate otherwise absent dynamic interactions in conventional models. In this study we developed an advanced in vitro Renal Cell Carcinoma (RCC) that mimics the interplay between healthy and malignant renal tissue. Based on the TissUse Humimic platform our model combines healthy renal proximal tubule epithelial cells (RPTEC) and RCC...

BACKGROUND: As polyether ether ketone (PEEK) is a relatively new material in dentistry, its bonding properties with regard to dental acrylic base materials are not fully known. To ensure the long-term success of removable dentures with a PEEK framework, the base materials must be well bonded to each other. OBJECTIVES: The study aimed to investigate the effects of different kinds of surface roughening treatment on PEEK and acrylic resin bonding. MATERIAL AND METHODS: Eighty PEEK specimens (N = 80) were randomly divided into 5 groups (n = 16 per group) and subjected to various surface roughening treatment (control, grinding, sandblasting, tribochemical silica coating (CoJet), and sulfuric acid etching)...

The progress of research focused on cholangiocytes and the biliary tree during development and following injury is hindered by limited available quantitative methodologies. Current techniques include two-dimensional standard histological cell-counting approaches, which are rapidly performed error-prone and lack architectural context; or three-dimensional analysis of the biliary tree in opacified livers, which introduce technical issues along with minimal quantitation. The present study aims to fill these quantitative gaps with a supervised machine learning model (BiliQML) able to quantify biliary forms in the liver of anti-Keratin 19 antibody-stained whole slide images...

Emulsions have become a crucial product form in various industries in modern times. Expanding the class of substances used to stabilize emulsions can improve their stability or introduce new properties. Particularly, the use of stimuli-responsive microgels makes it possible to create "smart" emulsions whose stability can be controlled by changing any of the specified stimuli. Thus, finding new ways to stabilize emulsions may broaden their application. In this work, for the first time, we applied microgels based on interpenetrating polymeric networks (IPNs) of poly( N -isopropylacrylamide) (PNIPAM) and poly(acrylic acid) (PAA) as stabilizing agents for "oil-in-water" emulsions...

Advances in pediatric cardiac surgery have resulted in a recent growing epidemic of children and young adults with congenital heart diseases (CHDs). In these patients, congenital defects themselves, surgical operations and remaining lesions may alter cardiac anatomy and impact the mechanical performance of both ventricles. Cardiac function significantly influences outcomes in CHDs, necessitating regular patient follow-up to detect clinical changes and relevant risk factors. Echocardiography remains the primary imaging method for CHDs, but clinicians must understand patients' unique anatomies as different CHDs exhibit distinct anatomical characteristics affecting cardiac mechanics...

While it is well-established that early detection and initiation of treatment of developmental dysplasia of the hip (DDH) is crucial to successful clinical outcomes, research on the mechanics of the hip joint during healthy and pathological hip development in infants is limited. Quantification of mechanical behavior in both the healthy and dysplastic developing joints may provide insight into the causes of DDH and facilitate innovation in treatment options. In this study, subject-specific three-dimensional finite element models of two pigs were developed: one healthy pig and one pig with induced dysplasia in the right hindlimb...

BACKGROUND: The vestibular aqueduct (VA) serves an essential role in homeostasis of the inner ear and pathogenesis of Ménière's disease (MD). The bony VA can be clearly depicted by high-resolution computed tomography (HRCT), whereas the optimal sequences and parameters for magnetic resonance imaging (MRI) are not yet established. We investigated VA characteristics and potential factors influencing MRI-VA visibility in unilateral MD patients. METHODS: One hundred patients with unilateral MD underwent MRI with three-dimensional sampling perfection with application optimized contrasts using different flip angle evolutions (3D-SPACE) sequence and HRCT evaluation...

Adipose-derived stem cells (ADSCs), possessing multipotent mesenchymal characteristics akin to stem cells, are frequently employed in regenerative medicine due to their capacity for a diverse range of cell differentiation and their ability to enhance migration, proliferation, and mitigate inflammation. However, ADSCs often face challenges in survival and engraftment within wounds, primarily due to unfavorable inflammatory conditions. To address this issue, hydrogels have been developed to sustain ADSC viability in wounds and expedite the wound healing process...

BACKGROUND: Herein, we present a proof-of-concept study of 3-dimensional (3D) pouchography using virtual and printed 3D models of ileal pouch-anal anastomosis (IPAA) in patients with normal pouches and in cases of mechanical pouch complications. MATERIALS & METHODS: We performed a retrospective, descriptive case series of a convenience sample of 10 pouch patients with or without pouch dysfunction who had CT scans appropriate for segmentation were identified from our pouch registry...