metrohm

Acid-base titration is a quantitative analysis that enables knowing the quantity of acidic or basic groups present in a solution sample. It consists in the addition of base or acid to the solution sample while monitoring the pH to reach a neutral pH. The titration can be automated and here we present a low cost Arduino based Open Source Pump (OSPump) modified to act as an automated titrator with an obsolete but reliable Metrohm 713 pH meter. Our device is 50 times less expensive than second hand units from the pH meter manufacturer and inherently open to customization...

Mixed-acidic cation-exchange (MCX) columns with both strongly (SCX) and weakly (WCX) acidic functional groups were developed for the separation of standard amino acids. The resins were prepared by carboxylation of highly crosslinked monodisperse poly(styrene-divinylbenzene) copolymer particles with performic acid and subsequent sulfonation with sulfuric acid. The degree of functionalization was varied independently for each processing step and controlled by measuring pH dependent retention of the obtained resins...

Chromium (Cr) (VI) is a toxic, mutagenic, and carcinogenic water pollutant. The standard ion chromatography (IC) method for quantification of Cr (VI) in water samples is Environmental Protection Agency Method 218.7, which requires postcolumn derivatization with 1,5-diphenylcarbazide and UV-Vis spectroscopy detection. Method 218.7 is Cr (VI) specific; thus, it does not allow detection of co-occurring natural and anthropogenic anions in environmental media. In this study, we developed an isocratic IC method with suppressed conductivity detection, a Metrohm Metrosep A Supp 7 column, and sodium carbonate/acetonitrile as mobile phase for simultaneous quantification of Cr (VI), <mml:math xmlns:mml="https://www...

This paper describes a research collaboration with Studio 1 Labs to provide the characterization for a novel smart baby monitoring device which includes conductive fabrics. The electrical characterization of the conductive fabrics is important for designing a bedsheet that can adequately be sensitive to physiological movement. Electrical impedance spectroscopy (EIS) has been performed using the Metrohm Autolab potentiostat on a two-fabric interface. For an increase in applied weight, there was an overall decrease in impedance shown both in its real and imaginary components...

BACKGROUND: Vegetables are the most important source of nitrates in the human diet. During various processes in the body, nitrates are converted into nitrites, which causes various diseases, such as blue baby syndrome and cancer. This study aimed to determine the concentration of nitrates in several vegetable farms in Sanandaj city and to evaluate their health-related risks. METHODS: This descriptive cross-sectional study was conducted from October 2017 to July 2018...

PM2.5 samples were collected in a northern suburb of Nanjing during the winter of 2015. Water soluble ions and carbonaceous substances under different air quality levels were analyzed by an 850 professional IC-type ion chromatograph produced by Metrohm and a Model 2001A carbon analyzer. The results show that the average mass concentration of PM2.5 , SO4 2- , NO3 - , and NH4 + during heavy pollution days was 4.0, 6.4, 3.1, and 3.9 times higher than on clear days, respectively. Three main secondary ions were all in the form of (NH4 )2 SO4 and NH4 NO3 on all days...

A variety of methods, including the Ion Selective Electrode (ISE), have been used for estimation of fluoride levels in drinking water. But as these methods suffer many drawbacks, the newer method of IC has replaced many of these methods. The study aimed at (1) validating IC for estimation of fluoride levels in drinking water and (2) to assess drinking water fluoride levels of villages in and around Vellore district using IC. Forty nine paired drinking water samples were measured using ISE and IC method (Metrohm)...

Retrospective in silico screening of analytical data for the identification of new or emerging disinfection by-products in drinking waters could be useful to assess quality and potential hazards, as well as help implement mitigation procedures more rapidly. Herein, the first study coupling ion exchange chromatography (IC) with high resolution mass spectrometry (HRMS) for the determination of halogenated carboxylic acid disinfectant by-products is reported. Separation was achieved using a Metrohm A Supp 5 column and a Na2 CO3 /NaHCO3 gradient eluent from 1/0...

Bacterial contamination of blood components is the major infectious risk in transfusion medicine. Since platelets should be stored at room temperature that makes them an excellent growth medium for bacteria; it is mentioned as a major problem in transfusion medicine. Transfusion risk of a bacterial contaminated platelet concentrate is higher than viral pathogen such as HIV, HBV, HCV and HTLV. The objective of this study was to evaluation of the sensitivity and specificity of use of glucose and pH for bacterial screening of platelet concentrates compared to the Bact/Alert...

A single organic counterion analysis method was developed by using an ion chromatography separation technique and conductivity detector. This allows the rapid characterization of an API to support clinical studies and to fulfil the regulatory requirements for the quantitation of fumarate, oxalate, succinate, and tartrate counterions in active pharmaceutical ingredients (quetiapine fumarate, escitalopram oxalate, sumatriptan succinate, and tolterodine tartrate). The method was developed by using the Metrohm Metrosep A Supp 1 (250 × 4...

The fast method of the simultaneous determination of F(-), Cl(-), Br(-) and SO4(2-) anions in the deionized water on the trace level by ion chromatography using thorough cleaning of respective water containers, 10 μM NaHCO3 water solution as eluent, short Metrohm (50 × 4 mm) separation column and a large water volume injection is proposed. Calculated detection limits are 10(-9)-10(-8)% depending on the element. The method for the fast screening of plant oil samples for the total fluorine-, chlorine-, bromine- and sulfur-organic compounds content (calculated for the respective elements) on the trace level is developed...

A total of 72 groundwater samples were collected from open wells and boreholes during pre- and post-monsoon periods in Tuticorin. Samples were analyzed for physicochemical properties, major cations, and anions in the laboratory using the standard methods given by the American Public Health Association. The fluoride concentration was analyzed in the laboratory using Metrohm 861 advanced compact ion chromatography. The geographic information system-based spatial distribution map of different major elements has been prepared using ArcGIS 9...

This study was a cross-sectional descriptive study and done in four seasons during April 2011 to March 2012.The objective of the present study was to examine Physico-chemical properties of groundwater around Tehran. The results are also compared with the guideline values of Iranian legislation. A total of 160 drinking water samples were collected from different drinking groundwater around the Tehran. Total Dissolved Solids (TDS), conductivity and pH, were measured by using standard methods and the concentration of ions Cl-, F-, NO3-, NO2-, Br-, SO4(2-), PO4(3-), Ca2+, K+, Na+ and NH4+ in groundwater was performed using Ion chromatography (Metrohm Company, USA) with standard method...

Aerosol was collected with Anderson cascade sampler at three altitudes of the Mount Huang in the summer 2011. Samples were analyzed by the ion chromatography (IC, Metrohm). The results showed that the mean mass concentrations of all the ions were 13.21 microg x m(-1), 10.94 microg x m(-3), 9.97 microg x m(-3), at the foot, mid height and the summit of the mountain, respectively. The mass concentration of water-soluble components of aerosol decreased with altitude. The major anion and cation of aerosols were SO4(2-) and NH4+, respectively...

Intake of water with high concentration of nitrate is a major problem in many countries as it affects health of humans. The present study was carried out with the objective of determining the causes for higher nitrate concentration in groundwater in parts of Nalgonda district, Andhra Pradesh, India. The study area is located at a distance of about 135 km towards ESE direction from Hyderabad. Nitrate concentration in groundwater of this area was analysed by collecting groundwater samples from 46 representative wells...

Diurnal samples of PM(1) (submicrometer particles, having aerodynamic diameters not greater than 1 μm) were collected at an urban background site in Zabrze (from 01.08. to 31.12.2009) and a rural background site in Racibórz (from 01.08. to 31.12.2010). The samples were analyzed for carbon (organic and elemental), water soluble ions (Na(+), NH(4) (+), K(+), Mg(2+), Ca(2+), Cl(-), NO(3)(-), SO(4)(2-)) and concentrations of 21 elements by using, respectively, a Sunset Laboratory carbon analyzer, a Herisau Metrohm AG ion chromatograph, a PANalitycal Epsilon 5 spectrometer...

Ion chromatography is the most popular instrumental analytical method used for the determination of anions and cations in water and wastewater. Isocratic ion chromatography with suppressed conductivity detection is frequently used in laboratories carrying out routine analyses of inorganic anions. The paper presents the results of the research into the influence of selected inorganic anions dominant in environmental samples (Cl(-), NO(3)(-), SO(4)(2-)) on the possibility of simultaneous determination of F(-), Cl(-), NO(2)(-), NO(3)(-), PO(4)(3-) and SO(4)(2-) with the application of this most popular ion chromatography type in standard separation conditions...

Diurnal samples of PM(2.5) and PM(2.5-10) were taken in an urban background area in Zabrze (Upper Silesia in southern Poland) in the winter (January-March) and summer (July-September) of 2009. The samples were analyzed for carbon (organic and elemental), water soluble ions (Na(+), NH(4) (+), K(+), Mg(2+), Ca(2+), F(-), Cl(-), NO(3) (-), PO(4) (3-), SO(4) (2-)) and concentrations of 27 elements by using, respectively, a Behr C50 IRF carbon analyzer, a Herisau Metrohm AG ion chromatograph, and a PANalitycal EPSILON 5 X-ray fluorescence spectrometer...

Accurate sodium replacement during prolonged exercise is possible when sweat rate and sweat sodium content are directly measured. Few athletes have access to sweat sodium content measurement, as the equipment needed to perform such analyzes is costly, laboratory-based or requires technical skills. Using 70 sweat samples collected in 24 athletes from 3 anatomical sites, this study determined the reliability [single-trial and inter-day (7 samples over 3 days)] and validity (instrument error) of a pocket-sized, easy-to-use and low cost sodium analyzer (Horiba C-122, Kyoto, Japan) against reference values of an ion chromatograph, the 883 Basic IC plus (Metrohm AG, Herisau, Switzerland)...

A potentiometric titration for determining the quaternary ammonium compounds (QAC) commonly found in antimicrobial products was validated by a single laboratory. Traditionally, QACs were determined by using a biphasic (chloroform and water) manual titration procedure. Because of safety considerations regarding chloroform, as well as the subjectivity of color indicator-based manual titration determinations, an automatic potentiometric titration procedure was tested with quaternary nitrogen product formulations...