chlorhexidin bonding strength

BACKGROUND: Perforation repair materials should have excellent sealing ability and dislodgement resistance. While several materials have been employed for perforation repair, newer calcium-silicate materials, such as Biodentine and TheraCal LC, have shown promising outcomes. AIMS: This study aimed to evaluate the effect of different irrigants on the dislodgement resistance of Biodentine and TheraCal LC when used for perforation repair in simulated conditions. METHODS AND MATERIAL: 3% sodium hypochlorite, 2% chlorhexidine gluconate, and 17% EDTA were evaluated for their effect on the dislodgement resistance of Biodentine and TheraCal LC...

INTRODUCTION: In a suitable condition, it is important to perform any dental restorative procedure using an operatory field isolated. Then, the aim of this study was to compare the bond strength of composite restorations to dentin affected by any contamination agent through a systematic review. METHODS: This systematic review was performed following the PRISMA 2020 guidelines. The literature search was conducted until September 2022 by scanning the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science...

Treating dentin surfaces with antibacterial agents prior to bonding bioactive restorations might affect their mechanical properties. In this study, we evaluated the effect of silver diamine fluoride (SDF) and chlorhexidine (CHX) on the shear bond strength (SBS) of bioactive restorative materials. Dentin discs were treated with SDF for 60 s or CHX for 20 s and bonded with four restorative materials, namely Activa Bioactive Restorative (AB), Beautifil II (BF), Fuji II LC (FJ), and Surefil One (SO). Control discs were bonded without treatment (n = 10)...

OBJECTIVE: To evaluate the effect of different bonding protocols on the microtensile bond strength (μTBS) of a universal adhesive to dentin contaminated with a hemostatic agent. METHODS AND MATERIALS: Ninety-five extracted premolars were used in this study. For the μTBS test, 80 teeth were cut to expose mid-coronal dentin and randomly divided into two groups (uncontaminated dentin and hemostatic agent-contaminated dentin). Each group was further divided into five subgroups (n=8/group): 1) SE: no additional treatment, 2) ER: etching with 32% phosphoric acid, 3) CHX: rinsing with 0...

This study aimed to evaluate the effect of different matrix metalloproteinase inhibitors (MMPIs) on the microtensile bond strength (μTBS) and nanoleakage of universal adhesives. One hundred twenty non-carious human molars were prepared and randomly assigned to two groups: Scotchbond Bond Universal (SBU) and Gluma Bond Universal (GBU). The samples in each group were assigned to five subgroups (n=12) based on one control (water) and four MMPIs (Benzalkonium-chloride (BAC), Batimastat (BB94), Chlorhexidine (CHX), and Epigallocatechin-gallate (EGCG))...

BACKGROUND: Shear bond analysis is the procedure used most frequently to gauge the tensile strength of adhesives incorporated in orthodontic treatments. In shear tensile strength analysis, pressure is placed as close as feasible to the interface between the orthodontic bracket and the surface of the tooth, parallel to the long axis of the tooth. Although numerous research on extracted teeth of human and bovine teeth have been conducted, there may still be variables such as pH, humidity, temperature, and others that could affect how these materials behave in the mouth cavity...

Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2...

AIMS AND OBJECTIVES: Assessment of micro tensile bond strength (microTBS) and micro-leakage scores of total-etch adhesive (TAE) and self-etch adhesive (SAE) bonded to carious affected dentin (CAD) sterilized using different cavity disinfectant (curcumin photosensitizer (CP) and malachite green (MG) and Chlorhexidine (CHX) in comparison to no disinfection (ND) control group. MATERIALS AND METHODS: One hundred and twenty human molars having International Caries Detection and Assessment System (ICDAS) scores of 4 and 5 were included...

AIM: This in vitro study aimed to evaluate the effect of matrix metalloproteinase (MMP) inhibitors on the bond strength of resin-cemented fibre posts to radicular dentin under an aged-loaded condition. MATERIALS AND METHODS: Radicular dentin was prepared and irrigated by MMP inhibitor solution after root canal obturation in 60 extracted single-rooted teeth based on 6 groups: (1) 2% chlorhexidine (CHX) + loaded; (2) CHX + unloaded; (3) 0.5% benzalkonium chloride (BAC) + loaded; (4) BAC + unloaded; (5) 17% ethylenediaminetetraacetic acid (EDTA) + loaded; and (6) EDTA + unloaded...

PURPOSE: This study aimed to evaluate the adhesive bond strength and antibacterial efficacy of methylene blue (MB)-mediated antimicrobial photodynamic therapy (aPDT) and curcumin (CUR)-mediated aPDT versus the conventional disinfectants, such as chlorhexidine gluconate (CHX) gel and sodium hypochlorite (NaOCl), for indirect pulp capping (IPC) treatment of permanent molars. METHODS: One Hundred grossly carious human permanent molars were collected through non-traumatic extraction...

AIMS: Evaluation of survival of S.mutans and shear bond strength (SBS) of adhesive restorative material bonded to carious affected dentin (CAD) after using cavity disinfectant i.e., Er, Cr: YSGG (ECYL), (Nd: YAG) (NYL), Malachite green (MG), Ocimum sanctum (OS) in comparison to the conventional control chlorhexidine gluconate (CHX). MATERIALS AND METHODS: Seventy-five caries-affected mandibular third molars having ICDAS scores 4 and 5 were included. Carious infected dentin was eliminated and CAD surface was obtained...

AIMS: The existing study aimed to assess the survival rate of S.mutans and shear bond strength (SBS) of resin adhesive restoration bonded to carious affected dentin (CAD) after using different cavity disinfectants (Chitosan, Fotoenticine®, and CO2 laser) in comparison to Chlorhexidine (CHX). MATERIALS AND METHODS: The study included human mandibular molars assessed on International Caries Detection and Assessment System (ICDAS) score 4 and 5. The cusp part of the clinical crown was cut off until the reduction reaches the central fossa while being continuously supplied with water coolant till the tooth cementoenamel junction (CEJ)...

PURPOSE: This study was conducted to investigate the fracture strength of reattached tooth fragments after different cavity disinfection protocols. MATERIALS AND METHODS: Incisal edges of 144 bovine incisors were sectioned and then randomly divided into 4 different groups as follows: Group C: no disinfectant; Group NaOCl: 2.5% sodium hypochlorite solution; Group NaOCl+Asc: 2.5% sodium hypochlorite followed by 10% ascorbic acid solution; Group CHX: 2% chlorhexidine solution...

OBJECTIVES: To develop an antibacterial and fluorescent clear aligner attachment resin via the incorporation of chlorhexidine loaded pore-expanded mesoporous silica nanoparticles (CHX@pMSN) and amino-silane functionalized zinc oxide quantum dots (aZnOQDs ), and to evaluate its antibacterial activity, fluorescence capability, esthetic properties, mechanical performance and biocompatibility. METHODS: CHX@pMSN and aZnOQDs were incorporated into the commercial resin composites (Filtek Z350 XT, 3M) at different mass fractions, control group: Filtek; fluorescent attachment resin (FAR): Filtek + 3 wt% aZnOQDs ; antibacterial and fluorescent attachment resin (AFAR)-1: Filtek + 3 wt% aZnOQDs  + 1 wt% CHX@pMSN; AFAR-2: Filtek + 3 wt% aZnOQDs  + 3 wt% CHX@pMSN; AFAR-3: Filtek + 3 wt% aZnOQDs  + 5 wt% CHX@pMSN...

BACKGROUND: The aim of this in vitro study was to evaluate push-out bond strength of different root-end filling materials using various irrigant solutions. METHODS: A push-out bond strength test was performed to evaluate the bond strength of two experimental root-end filling materials: namely, nano-hybrid mineral trioxide aggregate (MTA) and polymethyl methacrylate (PMMA) cement filled with 20% weight nano hydroxyapatite (nHA) fillers compared to conventional MTA...

The present invitro type of study has done to check the effect of blood contamination & chlorhexidine combination on the bond strength of brackets bonded with self-etch primer technique. The study consisted of ninety sound human upper premolars (extracted for orthodontic purpose) fixed in a self-cure acrylic block and segregated into three groups of 30 samples each. 0.022 slot metal MBT brackets (Gemini series-3M unitek) were bonded with self-etch primer using Transbond XT composite, CA, USA and light cure for 40 seconds) on clean buccal surface...

AIMS: To evaluate the antimicrobial effectiveness of cavity disinfectants chlorhexidine gluconate (CHX), Er, Cr, YSGG laser (ECL), and curcumin photosensitizer (CP) against Lactobacillus and shear bond strength (SBS) of Bioactive (BA) and bulk fill composite (BFC) restorative material bonded to carious affected dentin (CAD). MATERIALS AND METHODS: Sixty human mandibular molars scored 4 and 5 on the International Caries Detection and Assessment System (ICDAS) were included...

The pushout bond strength of root fillings at radicular dentin was investigated employing NaOCl, CHX, and homoeopathic mother tincture ( Arnica montana ) as an irrigant. Sixty human permanent single-rooted extracted teeth were decoronated. The root canals were instrumented using Pro taper universal rotary system (Dentsply Tulsa Dental; Tulsa, Oklahoma) and were prepared up to F3 apical size. The roots were then randomly divided into three groups according to irrigation solution ( n = 20) according to the final irrigation regimen: Group I: 3 mL 5...

PURPOSE: To evaluate the effect of chlorhexidine-loaded halloysite aluminosilicate clay nanotube (HNT) incorporation into a two-step etch-and-rinse (ONE-STEP) and a self-etch (XENO Ⅴ) adhesive on human dentin tensile shear strength (TSS). METHODS: Ten groups (n=12) were prepared according to the adhesive system and amount of CHX/HNT incorporated (5%, 10%, 15%) as follows: XE control(A1), XE experimental control (A2), 5% CHX/HNT-XE (A3), 10%CHX/HNT-XE (A4), 15% CHX/HNT-XE (A5), OS control (B1), OS experimental control (B2), 5% CHX/HNT-OS (B3), 10% CHX/HNT-OS (B4), 15% CHX/HNT-OS (B5)...

PURPOSE: To evaluate the effects of dentin pretreatment with chitosan-loaded oleuropein nanoparticles (CONPs) on the durability of resin-dentin bonding interfaces. METHODS: Eighty freshly extracted non-carious human third molars were randomly divided into four groups (n = 20 each): a de-ionized water (DW) group, a chitosan (CS) group, a chlorhexidine (CHX) group and a CONP group. The dentin in the DW, CS, CHX, and CONP groups were pretreated with de-ionized water, 1...