CBCT

BACKGROUND: As radiotherapy techniques advance, so do planning methods for multi-target intracranial SRS cases. Multi-target-single-isocenter (MTSI) planning offers high-precision beam delivery with shortened duration. However, accommodating all targets in a single Patient-Specific-Quality-Assurance (PSQA) with QA devices like SRS MapCHECK (SRS MC) is generally impractical. PURPOSE: Consequently, we conducted PSQA, using a custom script, by relocating each Target or Neighboring-Target-Group (T-NTG) relative to the beam isocenter on the PSQA device, ensuring each target's dose coverage at high precision...

OBJECTIVES: To determine the most distinctive quantitative radiomorphometric parameter(s) for the detection of MRONJ-affected bone changes in panoramic radiography (PR) and cone-beam computed tomography (CBCT). METHODS: PR and sagittal CBCT slices of 24 MRONJ patients and 22 healthy controls were used for the measurements of mandibular cortical thickness (MCT), fractal dimension (FD), lacunarity, mean gray value (MGV), bone area fraction (BA/TA), trabecular thickness (Tb...

Objective: To measure and analyze upper lip morphology variation before and after the cross-arch fixed restoration of the maxillary implant-supported prostheses using cone- beam CT (CBCT) to provide an esthetic objective reference for maxillary edentulous patients. Methods: There were 32 maxillary edentulous patients selected in the Department of Dental Implantology, The Affiliated Stomatological Hospital of Nanjing Medical University from January 2010 to December 2023. The CBCT data of patients with maxillary full-arch implant-supported fixed prostheses were retrospectively collected before implantation (T0), at the time of radio-guide insertion (T1), and after final repair (T2)...

BACKGROUND: The morphology of the nasopalatine canal is crucial in the planning of prosthetic restorations in the anterior region of the maxilla, as well as in the placement of orthodontic mini-implants. OBJECTIVES: The aim of this study was to assess the morphology of the nasopalatine canal using cone beam computed tomography (CBCT) scans of patients from the University Dental Clinic in Krakow, Poland, to define the position of the canal in relation to common sites of palatal median microimplant placement, and to investigate potential correlations between the anatomy of the canal and age and gender of the patients...

BACKGROUND: Retrieval of cement-retained implant-supported restorations is intriguing in cases of screw loosening. Detecting the estimated size of the screw access hole (SAH) could decrease destruction to the prosthesis and preserve the crown. OBJECTIVES: To precisely localize loose implant screws through cemented crowns to reduce crown damage after screw loosening. MATERIALS AND METHODS: In this in vitro study, 60 cement-retained implants supported 30 zirconia-based, and 30 ceramics fused to metal (CFM) lower molar crowns were invented, and each was subdivided into three subgroups (10 each)...

This study aimed to create a caries classification scheme based on cone-beam computed tomography (CBCT) and develop two deep learning models to improve caries classification accuracy. A total of 2713 axial slices were obtained from CBCT images of 204 carious teeth. Both classification models were trained and tested using the same pretrained classification networks on the dataset, including ResNet50_vd, MobileNetV3_large_ssld, and ResNet50_vd_ssld. The first model was used directly to classify the original images (direct classification model)...

BACKGROUND AND OBJECTIVE: Robotic-assisted bronchoscopy (RAB) is an emerging modality to sample pulmonary lesions. Cone-beam computed tomography (CBCT) can be incorporated into RAB. We investigated the magnitude and predictors of patient and staff radiation exposure during mobile CBCT-guided shape-sensing RAB. METHODS: Patient radiation dose was estimated by cumulative dose area product (cDAP) and cumulative reference air kerma (cRAK). Staff equivalent dose was calculated based on isokerma maps and a phantom simulation...

Precise alignment between digital arch scans and cone beam computed tomography (CBCT) scans is a crucial step in computer-aided implant planning and placement. However, clinicians frequently encounter challenges during this process when imaging patients with existing metal restorations or orthodontic devices, as these can introduce metallic artifacts on CBCT scans that lead to alignment deviations. The presented technique describes a straightforward approach using a radiopaque occlusal registration material as a radiographic marker to facilitate the alignment between digital arch scans and CBCT scans with metallic artifacts...

OBJECTIVE: The purpose of the study was to evaluate the proximity between the root apices of maxillary molars and maxillary sinus floor using cone-beam computed tomography (CBCT) in the southern Turkish subpopulation. DESIGN: For the study, 246 CBCT images were analyzed. The absence of antagonist teeth was excluded. Kwak's types III and V were detailed with three divisions. Division M; the penetration of the mesial root only, Division D; the penetration of the distal root only, and Division MD; the penetration of both buccal roots...

[This corrects the article DOI: 10.3389/fnins.2024.1348066.].

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated...

PURPOSE: To evaluate the intra-fractional tumor motion in lung stereotactic body radiotherapy (SBRT) with deep inspiration breath-hold (DIBH), and to investigate the adequacy of the current planning target volume (PTV) margins. METHODS: Twenty-eight lung SBRT patients with DIBH were selected in this study. Among the lesions, twenty-three were at right or left lower lobe, two at right middle lobe, and three at right or left upper lobe. Post-treatment gated cone-beam computed tomography (CBCT) was acquired to quantify the intra-fractional tumor shift at each treatment...

BACKGROUND: Mesiodens usually lead to the malposition and abnormal morphology of maxillary central incisors. AIM: To evaluate the detrimental effects of single unilaterally impacted mesiodens on the three-dimensional positions and morphology of the maxillary central incisor using cone-beam computed tomographic (CBCT) examinations. DESIGN: A total of 321 patients aged 5-17 years with single unilaterally impacted mesiodens were included and divided into two groups: mixed dentition group (5-10 years) and early permanent dentition group (11-17 years)...

OBJECTIVE: To compare collected bone weight and the frequency of autologous bone harvesting from the flutes of surgical drills used for implant bed preparation using two different drilling techniques. A comparative evaluation of radiographic bone density and bone quality was also made. MATERIALS AND METHODS: A randomized clinical trial was made of 66 dental implants in patients with a single posterior edentulous site. The compared drilling techniques were high-speed drilling with irrigation (control group) and low-speed drilling without irrigation (test group)...

PROPOSE: To evaluate the advantage of the manual adaptive plans comparing to the scheduled plans, and explored clinical factors predicting patients suitable for adaptive strategy. METHODS AND MATERIALS: Eighty two patients with weekly online cone-beam computed tomography (CBCT) were enrolled. The re-CT simulation was performed after 15 fractions and a manual adaptive plan was developed if a significant deviation of the planning target volume (PTV) was found. To evaluate the dosimetric benefit, D98, homogeneity index (HI) and conformity index (CI) for the planning target volume (PTV), as well as D2cc of the bowel, bladder, sigmoid and rectum were compared between manual adaptive plans and scheduled ones...

BACKGROUND: Pediatric rotary file systems were developed to solve manual file limitations. With many systems available, it may be tricky to select the most appropriate one. AIM: to assess & compare Kedo-S Square, Fanta-AF™-Baby rotary files with manual K-file concerning removed dentin amount, canal transportation, centric ability & root canal taper using CBCT in primary anterior teeth. DESIGN: Extracted Seventy-five upper primary anterior teeth with intact 2/3 root length were collected and divided into three groups based on root canal instrumentation, group-I: prepared using K-file, group-II: prepared using Kedo-S Square, and group-III: prepared using Fanta AF™ Baby file...

OBJECTIVE: To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (β -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. MATERIALS AND METHODS: Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15)...

PURPOSE: Complex bone defects with a horizontal and vertical combined deficiency pose a clinical challenge in implant dentistry. This study reports the case of a young female patient who presented with a perforating bone defect in the aesthetic zone. MATERIALS AND METHODS: Based on prosthetically guided bone regeneration, virtual 3D bone augmentation was planned. A 3D printed customised titanium mesh and the autogenous bone ring technique were then utilised simultaneously to achieve a customised bone contour...

Maxillary sinus grafting is a predictable regenerative technique to facilitate maxillary posterior implant placement when there is insufficient vertical bone height inferior to the maxillary sinuses to allow placement of implants of adequate dimensions. It enables an increase in vertical bone height, which makes implant placement easier. Maxillary sinus mucosal membrane perforation is one of the most common intraoperative complications during maxillary sinus grafting and may result in extrusion of graft material into the sinus...

Three-dimensional (3D) printing is an emerging manufacturing technology in dentistry with a range of applications. Digital dentistry presented in cone beam CT scan radiographs is a revolution that improved surgical outcomes by optimizing accurate diagnosis and analysis of the surgical sites before surgery. A periodontist can modify the treatment plan, surgical techniques, and incision design based on bone defects seen on cone beam CT scans. Block grafting has been a technique of choice when wound stability is required for guided bone regeneration...