Heat stress

This study presents a comprehensive approach for simulating the additive manufacturing process of semi-crystalline composite polymers using Fused Deposition Modeling (FDM). By combining thermomechanical Finite Element Analysis (FEA) with experimental validation, our main objective is to comprehend and model the complex behaviors of 50 wt.% carbon fiber-reinforced Polyphenylene Sulfide (CF PPS) during FDM printing. The simulations of the FDM process encompass various theoretical aspects, including heat transfer, orthotropic thermal properties, thermal dissipation mechanisms, polymer crystallization, anisotropic viscoelasticity, and material shrinkage...

The emergence of new semiconductor devices puts forward higher requirements for packaging technology. Sintered silver technology has gradually developed into critical packaging technology in silicon carbide power module packaging due to its good heat dissipation performance and reliability. However, high sintering drive requirements, low sintering densification, and high thermal-mechanical stresses limit the application of sintered silver technology for large-area bonding. In this study, the high-pressure-assisted (≥10 MPa) large-area sintered-silver interconnection process between a substrate and baseplate was discussed...

In order to enhance the quality of diamond composite materials, this work employs a Cu-Co-Fe and Ni-Cr-Cu pre-alloyed powder mixture as a transition layer, and utilizes laser-welding technology for saw blade fabrication. By adjusting the laser-welding process parameters, including welding speed and welding power, well-formed welded joints were achieved, and the microstructure and mechanical properties of the welded joints were investigated. The results demonstrate that the best welding performance was achieved at a laser power of 1600 W and a welding speed of 1400 mm/min, with a remarkable tooth engagement strength of up to 819 MPa...

A new Mg-4Zn X Ti-6Al-4V (TC4, of 0, 1, and 3 wt.%) alloy was successfully fabricated by a simple and low-cost gravity casting method and heat treatment at 150 °C for 24 h. The composite was examined by XRD, uniaxial tests, FESEM/EDS, potentiostat/EIS, and immersion tests for the material's microstructures, mechanical properties, electrochemical characteristics, and corrosion resistance. Experimental results indicate that heat treatment enables the precipitation of Zn along the Mg grain boundaries and drives the co-precipitation of Al around the TC4 particles and nearby grain boundaries...

The use of metal-coated ceramic powders not only effectively enhances the wettability of the metal-ceramic interface but also promotes a more uniform microstructure in Ti(C,N)-based cermets, which is advantageous for improving their mechanical properties. In this study, ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders were synthesized via the spray-drying-in-situ carbothermal reduction method. Subsequently, Ti(C,N)-based cermets were effectively fabricated using the as-prepared ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders...

Large-dimension complex integral thin-shell components are widely used in advanced transportation equipment. However, with the dimensional limitations of raw blanks and the manufacturing process, there are inhomogeneous geometric and mechanical properties at welded joints after welding, which have a significant effect on the subsequent forming process. Therefore, in this paper, the microstructure of welded joints with a sharp property change was accurately characterized by the proposed isothermal treatment method using the BR1500HS welded tube as an example...

Creep-feed grinding of high-strength steel is prone to excessive wheel wear and thermal damage defects, which seriously affects the service performance of parts. To solve the above-mentioned issue, a creep-feed grinding test was carried out on high-strength steel using SG and CBN abrasive wheels. The grindability of high-strength steel was scrutinized in terms of grinding force, machining temperature and grinding specific energy. Moreover, the effects of operation parameters and grinder performances on the surface integrity of the workpiece such as surface morphology, roughness, residual stress and hardness were rigorously studied...

Developing advanced underwater welding technology for titanium, which is the key structural material for underwater applications, is of great significance for the design, fabrication, and maintenance of submarine equipment. In this study, in order to investigate the underwater welding microstructure and mechanical properties of Ti-4Al-2V alloy, underwater wet laser welding was conducted on Ti-4Al-2V alloy using varying laser power. The microstructure and properties of the welding joints were characterized and analyzed...

A reliable strategy for improving the stability and shelf life of protein-stabilized systems is by covalently attaching the protein onto a polysaccharide. In this study, ovalbumin (OVA) was modified with dextran (DEX) of different molecular weights by the Maillard reaction, and was used to enhance the stability of emulsions loaded with resveratrol. The surface hydrophobicity, thermal stability, and FT-IR spectroscopy of the OVA-DEX conjugates were evaluated. The results showed that the surface hydrophobicity of OVA decreased, while the thermal stability of OVA was significantly improved after DEX covalent modification...

Oxidative stress represents a hallmark for many degenerative pathologies of the Central Nervous System. Throughout life, the constant pressure of noxious stimuli and/or episodes of traumatic events may expose the brain to a microenvironment where the non-balanced reactive oxygen species inevitably lead to neuronal loss and cognitive decline. HO-1, a 32 kDa heat-shock protein catalyzing the degradation of heme into carbon monoxide (CO), iron and biliverdin/bilirubin is considered one of the main antioxidant defense mechanisms playing pivotal roles in neuroprotection...

Heat shock proteins (Hsps) are involved in one of the adaptive mechanisms protecting cells against environmental and metabolic stress. Moreover, the large role of these proteins in the carcinogenesis process, as well as in chemoresistance, was noticed. This review aims to draw attention to the possibilities of using Hsps in developing new cancer therapy methods, as well as to indicate directions for future research on this topic. In order to discuss this matter, a thorough review of the latest scientific literature was carried out, taking into account the importance of selected proteins from the Hsp family, including Hsp27, Hsp40, Hsp60, Hsp70, Hsp90 and Hsp110...

Tuberculosis (TB) is the leading global cause of death f rom an infectious bacterial agent. Therefore, limiting its epidemic spread is a pressing global health priority. The chaperone-like protein HtpG of M. tuberculosis (Mtb) is a large dimeric and multi-domain protein with a key role in Mtb pathogenesis and promising antigenic properties. This dual role, likely associated with the ability of Heat Shock proteins to act both intra- and extra-cellularly, makes HtpG highly exploitable both for drug and vaccine development...

This examined the effects of Lonicera japonica extract (LJE) with different chlorogenic acid (CGA) contents on lactation performance, antioxidant status and immune function and rumen fermentation in heat-stressed high-yielding dairy cows. In total, 45 healthy Chinese Holstein high-yielding dairy cows, all with similar milk yield, parity, and days in milk were randomly allocated to 3 groups: (1) the control group (CON) without LJE; (2) the LJE-10% CGA group, receiving 35 g/(d·head) of LJE-10% CGA, and (3) the LJE-20% CGA group, receiving 17...

Good practices in farm animal care are crucial for upholding animal well-being, efficiency, and health. Pigs, like other farm animals, are exposed to various stressors, including environmental, nutritional, chemical, psychological, physiological, and metabolic stressors, which can disrupt their internal balance and compromise their well-being. Oxidative stress can adversely affect animal performance, fertility, and immunity, leading to economic losses for farmers. Dietary considerations are hugely important in attaining these objectives...

The aim of the study was to assess the usefulness of IRT measurements of selected regions of interest (ROI), i.e., the eyeball and the nose of whippet dogs, before and after coursing competitions taking place in various environmental conditions, thereby enabling the assessment of well-being and the level of heat stress. The research was carried out over two different periods with different thermal humidity indexes (THIs). In the first period, the THI was 59.27 (Run 1), while in the second period, the THI was 63...

This study hypothesizes that heat stress adversely affects dairy cows, resulting in reduced rumination, altering eating and drinking behaviors, changes in their locomotory patterns, and significant variations in their acid-base balance. The aim of this study was to investigate the impacts of heat stress on rumination, drinking, and locomotory behavior, as registered by innovative technologies, and acid-base balance in fresh multiparous dairy cows. This study was conducted during the summer, from 15 June to 8 July 2023, on a Lithuanian commercial dairy farm...

The purpose of this study was to assess the impact of various concentrations of Bacillus licheniformis -fermented products (BLFP) on the growth and productivity of laying ducks ( Anas platyrhynchos ) subjected to heat stress during eight weeks of a feeding trial. A total of 150 one-day-old Brown Tsaiya ducks of both sexes were divided into five groups, with each group having three replicates and 10 ducks each for evaluation of growth performance. The treatment groups received dietary supplements of BLFP at levels of 0...

Fish infectious diseases are one of the main constraints of the aquaculture sector. The use of medicinal plants provides a sustainable way of protection using safe, eco-friendly compounds in a more cost-effective way of treatment, compared to antibiotics. The aim of the present study is the assessment of Artemisia arborescens (AA) feed-supplementation effects on gilthead seabream ( Sparus aurata ). Fish with an average initial body weight of 109.43 ± 3.81 g, were divided into two groups based on AA feed composition (A25 and A50)...

The aim of this study was to investigate the effect of dietary peppermint extract (PE) on innate immunity and inflammatory responses in the spleen of broiler chickens under chronic heat stress. In order to further study the mechanism of the activation of innate immunity and inflammation induced by chronic heat stress and the regulatory effect of peppermint extract, we examined the spleen's histological change, the mRNA expression of major pattern recognition receptors (PRRs) (TLR2, TLR4, NOD1, MDA5 and DAI) and transcription factors (NF-κB, AP-1 and IRF3) and downstream inflammatory cytokines (IFN-α, IFN-β, IL-1β, IL-6 and TNF-α) of innate immune signaling pathways associated with heat stress in the spleen of broiler chickens...

Under natural conditions, abiotic stresses that limit plant growth and development tend to occur simultaneously, rather than individually. Due to global warming and climate change, the frequency and intensity of heat and salt stresses are becoming more frequent. Our aim is to determine the response mechanisms of tomato to different intensities of combined heat and salt stresses. The physiological and morphological responses and photosynthesis/reactive oxygen species (ROS)-related genes of tomato plants were compared under a control, heat stress, salt stress (50/100/200/400 mM NaCl), and a combination of salt and heat stresses...