microwaves

This study investigated the optimal pretreatment condition and mixture ratio of cattle manure (CM) for its efficient anaerobic co-digestion (AcoD) with food waste (FW) and pig manure (PM). The pretreatment performances of thermal (TM), microwave (MW), and ultrasound (US) technologies and the AcoD performance were statistically and experimentally evaluated at various mixture ratios of CM, FW, and PM. The results revealed that the most effective pretreatment condition with the TM, MW, and US pretreatments was 129...

Per- and polyfluoroalkyl substances (PFAS) are manufactured chemicals that have been detected across the globe. Fluorotelomer alcohols (FTOHs) are one PFAS class commonly found in indoor air due to emissions from consumer products ( e.g. , textiles and food packaging) and are human metabolic, atmospheric oxidative, and industrial precursors of perfluoroalkyl carboxylic acids (PFCAs). We developed a quantitative method for real-time analysis of gas-phase FTOHs, perfluoroalkyl acids (PFCAs and GenX), one perfluorooctane sulfonamide (EtFOSA), one fluorotelomer diol (FTdiOH), and one fluorinated ether (E2) using high-resolution time-of-flight chemical ionization mass spectrometry equipped with iodide reagent ion chemistry (I-HR-ToF-CIMS)...

Heterointerface engineering is presently considered a valuable strategy for enhancing the microwave absorption (MA) properties of materials via compositional modification and structural design. In this study, a sulfur-doped multi-interfacial composite (Fe7 S8 /NiS@C) coated with NiFe-layered double hydroxides (LDHs) is successfully prepared using a hydrothermal method and post-high-temperature vulcanization. When assembled into twisted surfaces, the NiFe-LDH nanosheets exhibit porous morphologies, improving impedance matching, and microwave scattering...

UNLABELLED: In this work, a series of novel 3-(halophenyl)-1-phenyl-1H-pyrazole moieties have been synthesized. Their structures were characterized by IR, NMR, and MS spectroscopy, and the corresponding antitumor properties were also studied. OBJECTIVES: This study aimed to synthesize a series of new 3-(halophenyl)-1-phenyl-1Hpyrazole moieties and survey the antitumor properties of these compounds. MATERIALS AND METHODS: 3-(halophenyl)-1-phenyl-1H-pyrazoles (4a-j) were prepared by reaction of phenyl hydrazine (3) with different halogen aromatic aldehydes (1a-j) and malononitrile (2) in C2H5OH and piperidine...

Ferrocene (FeCp2 ) was introduced as a non-magnetic guest molecule to activated carbon fibers (ACFs) as a nanographene-based host having localized spins originating from zigzag edges of graphene. The introduction of the guest molecule was confirmed by FTIR for ACFs-FeCp2 introduced at 55 (150) °C (FeCp2 -ACFs-55(150)). The appearance of satellite Fe2p peaks and the increase in shake-up peak intensity of the C1s in the XPS spectrum proved the emergence of charge-transfer host-guest interaction in FeCp2 -ACFs-150, supported by the red-shift of the G-band in the Raman spectrum...

Herein, this work targets to employ the blended fruit wastes including rambutan ( Nephelium lappaceum ) peel and durian ( Durio zibethinus) seed as a promising precursor to produce activated carbon (RPDSAC). The generation of RPDSAC was accomplished through a rapid and practical procedure (microwave-ZnCl2 activation). To evaluate the adsorptive capabilities of RPDSAC, its efficacy in eliminating methylene blue (MB), a simulated cationic dye, was measured. The Box-Behnken design (BBD) was utilized to optimize the crucial adsorption parameters, namely A : RPDSAC dose (0...

A highly homogeneous microwave zero-index metamaterial based on high-permittivity SrTiO3 ceramics is demonstrated to realize the small-aperture high-directivity antenna. Such a novel technique is a remarkable step forward to develop compact devices with better performance.

In this work, a beneficial approach for efficient depolymerization of lignin and controllable product distribution is provided. Lignin, an abundant aromatic biopolymer, has the potential to produce various biofuels and chemical adsorption agents and is expected to benefit the future circular economy. Microwave-ultrasonic (MW/US) assisted efficient depolymerization of lignin affords some aromatic materials used in manufacturing the starting material to be investigated. Some nano organometallic surfactants (NOMS) based on Ni2+ , Cu2+ , Co2+ , Fe3+ , and Mn2+ besides 2-hydroxynaphth-sulphanilamide are synthesized to enhance oil recovery (EOR)...

This paper presents the findings of a comprehensive study exploring the synergistic effects arising from the combination of microwave ablation and pulsed electromagnetic field (PEMF) therapy on prostate cancer cells. The research encompassed five distinct experimental groups, with continuous electric field measurements conducted during the entire treatment process. Group 1 and Group 2, subjected to microwave power below 350 W, exhibited specific electric field values of 72,800 V/m and 56,600 V/m, respectively...

A sustainable, bioinspired approach to functionalize basalt fibers with an innovative gallic acid (GA)-iron phenyl phosphonate complex (BF-GA-FeP), for the purpose of improving the flame retardancy in composite materials, is developed. BFs were at first pretreated with O3 , obtaining surface free hydroxyl groups that allowed the subsequent covalent immobilization of biosourced GA units on the fiber through ester linkages. Phenolic -OH groups of the GA units were then exploited for the complexation of iron phenyl phosphonate, resulting in the target-complex-coated BF fiber (BF-GA-FeP)...

Strawberries are a nutrient dense food rich in vitamins, minerals, non-nutrient antioxidant phenolics, and fibers. Strawberry fiber bioactive structures are not well characterized and limited information is available about the interaction between strawberry fiber and phenolics. Therefore, we analyzed commercial strawberry pomace in order to provide a detailed carbohydrate structural characterization, and to associate structures with functions. The pomace fraction, which remained after strawberry commercial juice extraction, contained mostly insoluble (49...

In the world of industrial drying processes, foam mat microwave drying is a significant and valuable approach. Its advantages include increased drying effectiveness, preservation of product quality, energy and cost savings, flexibility in application, and improved safety. Development of Nagpur mandarin juice powder is tedious and time-consuming due to its bitter test and less total soluble solid, therefore the present research carried out with the process parameters for microwave drying include microwave power levels (180, 360, 540, 720, and 900 W) and drying bed thicknesses (2, 4, and 6 mm)...

In this paper, a green, cost-effective sample preparation method based on air assisted liquid phase microextraction (AA-LPME) was developed for the simultaneous extraction of As(III) and Sb(III) ions from vegetable samples using hydrophilic/hydrophobic natural deep eutectic solvents (NADESs). Central composite design was used for the optimization of extraction factors including NADES volume, extraction cycle, pH, and curcumin concentration. Limits of detection for As(III) and Sb(III) were 1.5 ng L-1 and 0...

2D magnetic materials hold substantial promise in information storage and neuromorphic device applications. However, achieving a 2D material with high Curie temperature (TC ), environmental stability, and multi-level magnetic states remains a challenge. This is particularly relevant for spintronic devices, which require multi-level resistance states to enhance memory density and fulfil low power consumption and multi-functionality. Here, the synthesis of 2D non-layered triangular and hexagonal magnetite (Fe3 O4 ) nanosheets are proposed with high TC and environmental stability, and demonstrate that the ultrathin triangular nanosheets show broad antiphase boundaries (bAPBs) and sharp antiphase boundaries (sAPBs), which induce multiple spin precession modes and multi-level resistance...

Metal ions may act as enzyme cofactors and influence the kinetics of biochemical reactions that may also influence the biological production of therapeutic proteins and quality attributes such as glycosylation. Because sample preparation is a significant step in the reliable analysis of metals, we compared two sample preparation procedures for metal analysis of bioreactor culture media samples by ICP-MS: (i) samples were diluted in 2 % nitric acid (treatment with nitric acid, TNA); and (ii) samples were mixed with equal volume of 5 % nitric acid and closed vessel digestion was performed in a microwave (closed vessel digestion, CVD)...

In this study, we examined the possibility of using industrial microwave processing to enhance the gelling properties and reduce the starch digestibility of mung bean flour (MBF). MBF (12.6 % moisture) was microwaved at a power of 6 W/g to different final temperatures (100-130 °C), and then its structural and functional properties were characterized. The microwave treatment had little impact on the crystalline structure or amylose content of the starch, but it roughened the starch granule surfaces and decreased the short-range ordered structure and degree of branching...

Although ordered porous carbon materials (PCMs) have shown promising potential in the field of electromagnetic wave absorption (EWA), creating multifunctional PCMs with outstanding microwave absorption performance remains a significant challenge. Herein, ordered porous carbon aerogels loaded with pea-pod-like nitrogen-doped carbon nanotubes (CNTs) were fabricated via orientation freeze-drying followed by high-temperature pyrolysis. The optimized aerogel exhibits extraordinary EWA performance with a broad effective absorption bandwidth of 7...

Herein, we report a spectroscopic study of N-acetyl-L-cysteine, an important antioxidant drug, using Fourier-transform microwave techniques and in isolated conditions. Two conformers are observed, where most stable structure adopts a cis disposition, and the second conformer has a lower abundance and adopts a trans disposition. The rotational constants and the barriers to methyl internal rotation are determined for each conformer, allowing a precise conformation identification. The results show that the cis form adopts an identical structure in the crystal, solution, and gas phases...

No abstract text is available yet for this article.

Phonon-based frequency combs that can be generated in the optical and microwave frequency domains have attracted much attention due to the small repetition rates and the simple setup. Here, we experimentally demonstrate a new type of phonon-based frequency comb in a silicon optomechanical crystal cavity including both a breathing mechanical mode (∼GHz) and flexural mechanical modes (tens of MHz). We observe strong mode competition between two approximate flexural mechanical modes, i.e., 77.19 and 90...