Volume kinetics

The cathode in lithium-selenium (Li-Se) batteries has garnered extensive attention owing to its superior specific capacity and enhanced conductivity compared to sulfur. Nonetheless, the adoption and advancement of Li-Se batteries face significant challenges due to selenium's low reactivity, substantial volume fluctuations, and the shuttle effect associated with polyselenides. Single-atom catalysts (SACs) are under the spotlight for their outstanding catalytic efficiency and optimal atomic utilization. To address the challenges of selenium's low chemical activity and volume expansion in Li-Se batteries, through electrospun, we have developed a lotus root-inspired carbon nanofiber (CNF) material, featured internal multi-channels and anchored with molybdenum (Mo) single atoms (Mo@CNFs)...

Aerosol droplets are unique microcompartments with relevance to areas as diverse as materials and chemical synthesis, atmospheric chemistry, and cloud formation. Observations of highly accelerated and unusual chemistry taking place in such droplets have challenged our understanding of chemical kinetics in these microscopic systems. Due to their large surface-area-to-volume ratios, interfacial processes can play a dominant role in governing chemical reactivity and other processes in droplets. Quantitative knowledge about droplet surface properties is required to explain reaction mechanisms and product yields...

Residual stress in metal halide perovskite films intimately affects the photovoltaic figure of merit and longevity of perovskite solar cells. A delicate management of the crystallization kinetics is critical to the preparation of high-quality perovskite films. Only very limited methods, however, are available to regulate the residual stress of a perovskite film in a controllable manner, particularly for a perovskite film fabricated by a two-step method. Here, we demonstrate the construction of a hierarchical PbI2 scaffold inspired by Archaeoprepona demophon butterfly by combining an interlayer guided growth of porous structure and nanoimprinting...

Kinetic characterization of catalytic amyloids arguably presents a most challenging type of kinetic experiment where careful consideration of many factors is required. Here we outline common pitfalls in devising kinetic studies in such systems. Unlike the more specific protocols for various applications described in this volume, this chapter deals with general issues in setting up kinetic experiments that are incredibly important but often go without explicit mention in the specialized literature. The kinetic fundamentals described here can be also be of use to the enzymologists working with more traditional catalysts...

BACKGROUND: The distribution and elimination of infused crystalloid fluid is known to be affected by general anesthesia, but it is unclear whether changes differ depending on whether the patient is operated in the flat recumbent position, the Trendelenburg ("legs up") position, or the reverse Trendelenburg ("head up") position. METHODS: Retrospective data on hemodilution and urine output obtained during and after infusion of 1-2 L of Ringer's solution over 30-60 min were collected from 61 patients undergoing surgery under general anesthesia and 106 volunteers matched with respect to the infusion volume and infusion time...

The effects of calcium-to-silicon ratio on the properties of fly ash (FA)-based tobermorite and its removal performance of Zn2+ and Mn2+ were studied. The calcium-to-silicon ratio had a significant effect on the structural properties of the tobermorite samples. The specific surface area, pore volume, and average pore size of mesoporous tobermorite samples with different calcium-to-silicon ratios (0.8TOB, 1.2TOB, and 1.6TOB) were much larger than those of FA, and those of 1.2TOB were the largest, which were 53...

The pore network architecture of porous heterogeneous catalyst supports has a significant effect on the kinetics of mass transfer occurring within them. Therefore, characterizing and understanding structure-transport relationships is essential to guide new designs of heterogeneous catalysts with higher activity and selectivity and superior resistance to deactivation. This study combines classical characterization via N2 adsorption and desorption and mercury porosimetry with advanced scanning electron microscopy (SEM) imaging and processing approaches to quantify the spatial heterogeneity of γ-alumina (γ-Al2 O3 ), a catalyst support of great industrial relevance...

BACKGROUND: Pesticide dilution is one of the essential aspects of plant protection. However, the effect of dilution on the deposition characteristics of pesticide droplets containing particulate additives on crop leaf surfaces remains unclear and warrants further research. Herein, a validated computational fluid dynamics (CFD)-volume of fluid (VOF)-discrete phase model (DPM) numerical model was developed to analyze the influence of particle content on the deposition behavior of droplets on the leaf surface comparatively, taking into account the particle content of different diluted thifluzamide solutions...

Poor thermostability reduces the industrial application value of κ-carrageenase. In this study, the PoPMuSiC algorithm combined with site-directed mutagenesis was applied to improve the thermostability of the alkaline κ-carrageenase from Pseudoalteromonas porphyrae. The mutant E154A with improved thermal stability was successfully obtained using this strategy after screening seven rationally designed mutants. Compared with the wild-type κ-carrageenase (WT), E154A improved the activity by 29...

Purpose To investigate the associations between contrast-enhanced ultrasound imaging features and disease recurrence among patients with locally advanced breast cancer treated with neoadjuvant chemotherapy. Materials and Methods In the study, pre- and post-neoadjuvant chemotherapy contrast-enhanced ultrasound images of 43 patients with breast cancer were retrospectively analysed. Post-acquisition image processing involved the placement of freehand-drawn regions of interest, followed by the generation of blood flow kinetics representing blood volume and velocity for these regions of interest...

In this study, simulations were carried out to study the combustion characteristics within a 600 MW W-shaped pulverized coal boiler under O2 /N2 and O2 /CO2 atmospheres. The objective of this work is to develop and validate a novel model for pulverized coal combustion under O2 -enriched conditions, specifically optimized for the O2 /CO2 atmosphere. The innovation in this model lies in the precise calibration of kinetic constants for soot nucleation and surface growth rates, enabling a more accurate simulation of flame characteristics (such as the flame temperature and soot volume fraction) under O2 -enriched combustion conditions...

Low-cost environmentally benign materials that can be produced in a large scale to extract lithium from brine resources could drive the lithium market toward a clean technology with high lithium recovery and production. Herein, we have investigated the utilization of a novel, environmentally benign, and low-cost biobased sorbent for the extraction of lithium from lithium-rich solutions. This biobased molecular sieving sorbent, iron(III)-tannate (Fe(III)-TA), belongs to a novel class of coordination polymer frameworks derived from a natural polyphenol-tannic acid (TA)-coordinated with iron(III) metal cations...

Stomatal regulation is critical for mangroves to survive in the hyper-saline intertidal zone where water stress is severe and water availability is highly fluctuant. However, very little is known about the stomatal sensitivity to vapour pressure deficit (VPD) in mangroves, and its co-ordination with stomatal morphology and leaf hydraulic traits. We measured the stomatal response to a step increase in VPD in situ , stomatal anatomy, leaf hydraulic vulnerability and pressure-volume traits in nine true mangrove species of five families and collected the data of genome size...

The preparation of ethylenediaminetetraacetic acid (EDTA) functionalized pine needles biochar (EDTA@BC) as a low-cost active adsorbent and its effectiveness in removing Ni(II) from aqueous solution at various conditions is reported in this paper. First, alkali activation was selected to render the pine needle biochar with an excellent porous structure and increased concentration of hydroxyl groups to facilitate grafting. Subsequently, a simple method was utilized to graft EDTA onto the biochar. The prepared EDTA@BC was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive x-ray spectrometry (EDX)...

The effects of austenitizing and austempering temperatures on the bainite transformation kinetics and the microstructural and mechanical properties of a medium-carbon high-silicon ultra-fine bainitic steel were investigated via dilatometric measurements, microstructural characterization and mechanical tests. It is demonstrated that the optimum austenitizing temperature exists for 0.3 wt.%C ultra-fine bainitic steel. Although the finer austenite grain at 950 °C provides more bainite nuclei site and form finer bainitic ferrite plates, the lower dislocation density in plates and the higher volume fraction of the retained austenite reduces the strength and impact toughness of ultra-fine steel...

The necessity to eliminate nickel (Ni) from wastewater stems from its environmental and health hazards. To enhance the Ni adsorption capacity, this research applied a copper sulfate-ammonia complex (tetraamminecopper (II) sulfate monohydrate, [Cu(NH3 )4 ]SO4 ·H2 O) as a modifying agent for a Phragmites australis-based activated carbon preparation. The physiochemical properties of powdered activated carbon (PAC) and a modified form ([Cu(NH3 )4 ]-PAC) were examined by measuring their surface areas, analyzing their elemental composition, and using Boehm's titration method...

Sorption technologies are essential for various industries because they provide product quality and process efficiency. New encapsulated microspherical composite sorbents have been developed for resource-saving contact drying of thermolabile materials, particularly grain and seeds of crops. Magnesium sulfate, known for its high water capacity, fast sorption kinetics, and easy regeneration, was used as an active moisture sorption component. To localize the active component, porous carriers with an accessible internal volume and a perforated glass-crystalline shell were used...

Water pollution, particularly from heavy metals, poses a significant threat to global health, necessitating efficient and environmentally friendly removal methods. This study introduces novel zeolite-based adsorbents, specifically alkali-activated foamed zeolite (AAFZ), for the effective adsorption of Cu(II) and Ni(II) ions from aqueous solutions. The adsorbents' capabilities were comprehensively characterized through kinetic and isotherm analyses. Alkaline activation induced changes in chemical composition and crystalline structure, as observed via XRF and XRD analyses...

The impact of cryogenic pretreatments on drying performance was studied in blueberries, seabuckthorn fruits and green grapes. The fruits were immersed in liquid nitrogen in 2 min freezing/thawing cycles (one to five). Untreated samples were used as the control. Drying experiments were carried out on treated and non-treated berries at 50 °C and 1 m/s (hot-air-drying), 50 °C and 25″ Hg vacuum (vacuum-drying), 30 mTorr total pressure and 25 °C shelf temperature (freeze-drying). The weight loss evolution of the foodstuffs was measured as a function of time...

By combining the porosity of crystalline metal-organic frameworks (MOFs) with the unique processability of the liquid state, melt-quenched MOF glasses offer exciting opportunities for molecular separation. However, progress in this field is limited by two factors. Firstly, only very few MOFs melt at elevated temperatures and transform into stable glasses upon cooling the corresponding MOF liquid. Secondly, the MOF glasses obtained thus far feature only very small porosities and very small pore sizes. Here, we demonstrate solvent-assisted linker exchange (SALE) as a versatile method to prepare highly porous melt-quenched MOF glasses from the canonical ZIF-8...