GPA

OBJECTIVE: To assess relationship between Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis and inflammatory bowel disease (IBD). METHODS: This is a retrospective study design. The patients were identified using a preset criteria of patients who have the diagnosis of ANCA associated vasculitis including a diagnosis of granulomatosis with polyangiitis (GPA) or microscopic polyangiitis (MPA) or eosinophilic granulomatosis with polyangiitis (EGPA) with overlapping inflammatory bowel disease (Crohn's disease or ulcerative colitis) in the time period from 01/01/2020 to 08/03/2023...

PURPOSE/OBJECTIVES: Critical thinking and evidence-based dentistry are skills that dental students are required to demonstrate, but monitoring and quantifying progress can be challenging. This study is investigating whether the HEIghten critical thinking assessment (HCTA) could be used as a potential tool, both for use prior to admitting students, and to monitor whether the students' skills improve over their time at dental school. METHODS: Freshman dental students (n = 92) were given the HCTA during their first semester of dental school...

Transition metal dichalcogenides (TMDs) exhibit excellent electronic and photoelectric properties under pressure, prompting researchers to investigate their structural phase transitions, electrical transport, and photoelectric response upon compression. Herein, the structural and photoelectric properties of layered ZrS2 under pressure using in situ high-pressure photocurrent, Raman scattering spectroscopy, alternating current impedance spectroscopy, absorption spectroscopy, and theoretical calculations are studied...

Bismuth telluride (Bi2 Te3 )-based alloys have been extensively employed in energy harvesting and refrigeration applications for decades. However, commercially produced Bi2 Te3 -based alloys using the zone-melting (ZM) technique often encounter challenges such as insufficient mechanical properties and susceptibility to cracking, particularly in n-type Bi2 Te3 -based alloys, which severely limit the application scenarios for bismuth telluride devices. In this work, we seek to enhance the mechanical properties of n-type Bi2 Te2...

Pb plays an important role in determining the morphologies and mechanical properties of the Mg2 Si phase in Mg-2.5Si- x Pb alloys. As the amount of Pb increases from 0.4 wt.% to 1 wt.%, the primary Mg2 Si phase is refined during solidification. Its morphologies transform from equiaxed-dendrite to polygonal and finally to roughly circular. The key reason for morphology evolution is the preferential adsorption of Pb atoms on Mg2 Si {100} surfaces to suppress the growth rate along the ⟨100⟩ directions, which is demonstrated by the adsorption model based on first principles...

The aim of this study was to assess the influence of thermocompression conditions on lignocellulosic biomasses such as sugarcane bagasse (SCB) in the production of 100% binderless bio-based materials. Five parameters were investigated: pressure applied (7-102 MPa), molding temperature (60-240 °C), molding time (5-30 min), fiber/fine-particle ratio (0/100-100/0) and moisture content (0-20%). These parameters affected the properties and chemical composition of the materials. The density ranged from 1198 to 1507 kg/m3 , the flexural modulus from 0...

The literature suggests that the yield strain of cortical bone is invariant to its stiffness (elastic modulus) and strength (yield stress). However, data about intra-individual variations, e.g., the influence of different collagen/mineral organisations observed in bone aspects withstanding different habitual loads, are lacking. The hypothesis that the yield strain of human cortical bone tissue, retrieved from femoral diaphyseal quadrants subjected to different habitual loads, is invariant was tested. Four flat dumbbell-shaped specimens were machined from each quadrant of the proximal femoral diaphysis of five adult donors for a total of 80 specimens...

We report a new nanoporous amorphous carbon (NAC) structure that achieves both ultrahigh strength and high electrical conductivity, which are usually incompatible in porous materials. By using modified spark plasma sintering, we create three amorphous carbon phases with different atomic bonding configurations. The composite consists of an amorphous sp2-carbon matrix mixed with amorphous sp3-carbon and amorphous graphitic motif. NAC structure has isotropic electrical conductivity of up to 12,000 S/m, a Young's modulus of up to ∼5 GPa, and Vickers hardness of over 900 MPa...

OBJECTIVES: To evaluate the influence of collateral vascularization on surgical cleft palate closure and deformities. MATERIALS AND METHODS: Corrosion casting was performed using red-colored acrylic resin in twelve fresh adult cadavers with a normal hard palate. Additionally, white-colored barium sulfate was injected into a fetus with a unilateral complete cleft palate, and layer-by-layer tissue dissection was performed. Both substances were injected into the external carotid arteries...

We report a joint high-pressure experimental and theoretical study of the structural, vibrational, and photoluminescent properties of pure and Eu3+ -doped cubic Y2 O3 nanoparticles with two very different average particle sizes. We compare the results of synchrotron X-ray diffraction, Raman scattering, and photoluminescence measurements in nanoparticles with ab initio density-functional simulations in bulk material with the aim to understand the influence of the average particle size on the properties of pure and doped Y2 O3 nanoparticles under compression...

UNLABELLED: Orthodontic mini-implants are devices used for anchorage in various orthodontic treatments. We conducted a pilot study which aimed to observe preliminary trends regarding the impact of heat treatment on the elastic modulus of Ti6Al4V alloy and stainless steel 316L mini-implants. The initial phase involved testing the impact of heat treatment on the mechanical properties of Ti6Al4V alloy and stainless steel 316L mini-implants. MATERIAL AND METHODS: Ten self-drilling mini-implants sourced from two distinct manufacturers (Jeil Medical Corporation® and Leone® ) with dimensions of 2...

While the dominant finding indicates a monotonic relationship between cognitive ability and academic performance, some researchers have suggested the existence of cognitive thresholds for challenging coursework, such that a certain level of cognitive ability is required for reaching a satisfactory level of academic achievement. Given the significance of finding a threshold for understanding the relationship between cognitive ability and academic performance, and the limited studies on the topic, it is worth further investigating the possibility of cognitive thresholds...

In recent years, the use of zinc (Zn) alloys as degradable metal materials has attracted considerable attention in the field of biomedical bone implant materials. This study investigates the fabrication of porous scaffolds using a Zn-1Mg-0.1Sr alloy through a three-dimensional (3D) printing technique, selective laser melting (SLM). The results showed that the porous Zn-1Mg-0.1Sr alloy scaffold featured a microporous structure and exhibited a compressive strength (CS) of 33.71 ± 2.51 MPa, a yield strength (YS) of 27...

Although beryllium and its compounds show outstanding properties, owing to its toxic potential and extreme reaction conditions the chemistry of Be under high-pressure conditions has only been investigated sparsely. Herein, we report on the highly condensed wurtzite-type Be2PN3, which was synthesized from Be3N2 and P3N5 in a high-pressure high-temperature approach at 9 GPa and 1500 °C. It is the missing member in the row of formula type M2PN3 (M = Mg, Zn). The structure was elucidated by powder X-ray diffraction (PXRD), revealing that Be2PN3 is a double nitride, rather than a nitridophosphate...

The continued interest in 2D carbon allotropes stems from their unique structural and electronic characteristics, which are crucial for diverse applications. This work theoretically introduces PHOTH-Graphene (PHOTH-G), a novel 2D planar carbon allotrope formed by 4-5-6-7-8 carbon rings. PHOTH-G emerges as a narrow band gap semiconducting material with low formation energy, demonstrating good stability under thermal and mechanical conditions. This material has slight mechanical anisotropy with Young modulus and Poisson ratios varying between 7...

Van der Waals (vdW) assembly of low-dimensional materials has proven the capability of creating structures with on-demand properties. It is predicted that the vdW encapsulation can induce a local high-pressure of a few GPa, which will strongly modify the structure and property of trapped materials. Here, we report on the structural collapse of carbon nanotubes (CNTs) induced by the vdW encapsulation. By simply covering CNTs with a hexagonal boron nitride flake, most of the CNTs (≈77%) convert from a tubular structure to a collapsed flat structure...

Spider silk exhibits an excellent combination of high strength and toughness, which originates from the hierarchical self-assembled structure of spidroin during fiber spinning. In this work, superfine nanofibrils are established in polyelectrolyte artificial spider silk by optimizing the flexibility of polymer chains, which exhibits combination of breaking strength and toughness ranging from 1.83 GPa and 238 MJ m-3 to 0.53 GPa and 700 MJ m-3 , respectively. This is achieved by introducing ions to control the dissociation of polymer chains and evaporation-induced self-assembly under external stress...

INTRODUCTION: Immunoglobulin G4-related disease (IgG4-RD) is a systemic inflammatory disease characterized by elevated serum IgG4, tissue infiltration of IgG4-positive cells, and fibrosis. Although a number of IgG4-RD patients show sinonasal involvement, there is little known about sinonasal inflammation associated with IgG4-RD. This study aimed to describe the clinicopathological features of sinonasal inflammation associated with IgG4-RD and to compare with other inflammatory diseases, such as eosinophilic chronic rhinosinusitis (ECRS) and granulomatosis with polyangiitis (GPA)...

For hydride superconductors, each significant advance is built upon the discovery of novel H-based structural units, which in turn push the understanding of the superconducting mechanism to new heights. Based on first-principles calculations, we propose a metastable LiH4 with a wavy H layer composed of the edge-sharing pea-like H18 rings at high pressures. Unexpectedly, it exhibits pressure-insensitive superconductivity manifested by an extremely small pressure coefficient (d T c /d P ) of 0.04 K/GPa. This feature is attributed to the slightly weakened electron-phonon coupling with pressure, caused by the reduced charge transfer from Li atoms to wavy H layers, significantly suppressing the substantial increase in the contribution of phonons to T c ...

In extreme and nanoconfinement conditions, the tetrahedral arrangement of water molecules is challenged, resulting in a rich and new phase behavior unseen in bulk phases. The unique phase behavior of water confined in hydrophobic nanoslits has been previously observed, such as the formation of a variety of two-dimensional (2D) ices below the freezing temperature. The primary identified 2D ice phase, termed square tube ice (STI), represents a unique arrangement of water molecules in 2D ice, which can be viewed as an array of 1D ice nanotubes stacked in the direction parallel to the confinement plane...