Joints, fracture ,

BACKGROUND: Excellent hip joint function facilitates limb recovery and improves the quality of survival. This study aimed to investigate the potential risk factors affecting postoperative joint functional activity and outcomes in elderly hip fractures patients and to provide evidence for patient rehabilitation and clinical management. AIM: To explore the relationship between inflammatory factors and hip function and the interaction between inflammation and health after hip fracture in elderly patients...

The study aimed to explore an extra-articular screw placement strategy in Stoppa approach. Radiographic data of patients who underwent pelvic computed tomography from January 2016 to June 2017 were imported into Materiaise's interactive medical image control system software for three-dimensional reconstruction. Superior and lower margins of acetabulum and ipsilateral pelvic brim could be observed simultaneously through inlet-obturator view. A horizontal line from superior acetabular margin intersected pelvic brim at point "A" and another vertical line from lower margin intersected pelvic brim at point "B" were drawn, respectively...

Condylar stress fracture of the distal end of the third metacarpal/metatarsal (MC3/MT3) bones is a major cause of Thoroughbred racehorse injury and euthanasia worldwide. Functional adaptation to exercise and fatigue damage lead to structural changes in the subchondral bone that include increased modeling (resulting in sclerotic bone tissue) and targeted remodeling repair (resulting in focal resorption spaces in the parasagittal groove). Whether these focal structural changes, as detectable by standing computed tomography (sCT), lead to elevated strain at the common site of condylar stress fracture has not been demonstrated...

BACKGROUND: Osteosynthesis for sacroiliac joint (SIJ) diastasis using an iliosacral screw (ISS) and a trans-iliac-trans-sacral screw (TITSS) can be performed using a closed or an open method. However, no clear indication for open reduction has been established. METHODS: Data on patients with unilateral traumatic SIJ diastasis who underwent ISS and TITSS fixation were retrospectively collected and separated into groups according to the reduction method: closed reduction group (C group) and open reduction group (O group)...

OBJECTIVES: To assess the treatment and outcomes of supracondylar humeral fractures (SHFs) in children older than 10 years of age at the time of injury. METHODS: The study analyzed clinical data from 60 patients who sustained SHF, all over the age of 10 years, were analyzed. The patients included 49 males and 11 females with a mean age of 10.9 ± 0.9 years (range, 10 to 14.5). All patients underwent surgical treatment under general anesthesia. Closed reduction (CR) and percutaneous fixation were the primary treatment, with open reduction and internal fixation being employed only in cases CR was unsuccessful...

(1) Background : Dislocations of the trapeziometacarpal joint (TMC) are uncommon in children and adolescents. Only a few isolated cases are reported in the literature. Therapeutic guidance is minimal and inconclusive. (2) Methods : The authors present four patients treated for this unusual lesion. We evaluated the evolution according to treatment, age, patient activity, and quickDASH. Despite the clear limitation of the small number of patients, it is relevant to try to better understand this lesion and its evolution...

In order to enhance the quality of diamond composite materials, this work employs a Cu-Co-Fe and Ni-Cr-Cu pre-alloyed powder mixture as a transition layer, and utilizes laser-welding technology for saw blade fabrication. By adjusting the laser-welding process parameters, including welding speed and welding power, well-formed welded joints were achieved, and the microstructure and mechanical properties of the welded joints were investigated. The results demonstrate that the best welding performance was achieved at a laser power of 1600 W and a welding speed of 1400 mm/min, with a remarkable tooth engagement strength of up to 819 MPa...

To obtain high-quality joints of Al/steel dissimilar materials, a new extrinsic-riveting friction stir lap welding (ERFSLW) method was proposed combining the synthesis advantages of mechanical riveting and metallurgical bonding. SiC-reinforced Al matrix composite bars were placed in the prefabricated holes in Al sheets and steel sheets, arranged in a zigzag array. The bars were stirred and mixed with Al sheets under severe plastic deformation (SPD), forming composite rivets to strengthen the mechanical joining...

Developing advanced underwater welding technology for titanium, which is the key structural material for underwater applications, is of great significance for the design, fabrication, and maintenance of submarine equipment. In this study, in order to investigate the underwater welding microstructure and mechanical properties of Ti-4Al-2V alloy, underwater wet laser welding was conducted on Ti-4Al-2V alloy using varying laser power. The microstructure and properties of the welding joints were characterized and analyzed...

Bridge cable wires suffer from alternating stress and environmental erosion, leading to premature failure prior to its design life. This paper investigates the fatigue and mechanical behaviors of corroded bridge cable wires with a zinc-aluminum (Zn-Al) alloy coating. Based on the salt spray corrosion test and microstructure analysis, the anti-corrosion resistance and corrosion appearance characteristics of the Zn-Al alloy coating and galvanized coating were investigated. The Zn-Al alloy coating was superior in resistance to corrosion fatigue for the improvement in toughness and the generation of anti-corrosion Zn-Al and Fe-Zn-Al phases...

The manuscript presents the results of butt joining of 3-millimeter-thick AlCu4Mg1 alloy sheets using the FSW (friction stir welding) and UWFSW (underwater friction stir welding) methods. The aim of the research is to verify the influence of the water environment on the FSW friction welding process. The article checked three sets of joint parameters. The parameters differed in tool rotation speed and feed rate. The same sets of parameters were used for the FSW and UWFSW fusion techniques. With the supplied devices, metallographic sections are cross-sectioned, and the power supplies are subjected to a light microscope...

The increased incidence of osteoarthritis (OA), particularly knee and hip OA, and osteoporosis (OP), owing to population aging, have escalated the medical expense burden. Osteoarthritis is more prevalent in older women, and the involvement of subchondral bone fragility spotlights its association with OP. Notably, subchondral insufficiency fracture (SIF) may represent a more pronounced condition of OA pathophysiology. This review summarizes the relationship between OA and OP, incorporating recent insights into SIF...

BACKGROUND CONTEXT: Pelvic ring fractures are becoming more common in the aging population and can prove to be fatal, having mortality rates between 10% and 16%. Stabilization of these fractures is challenging and often require immediate internal fixation. Therefore, it is necessary to have a biomechanical understanding of the different fixation techniques for pelvic ring fractures. METHODS: A previously validated three-dimensional finite element model of the lumbar spine, pelvis, and femur was used for this study...

Finger extension stiffness is a common post-traumatic complication that results in the hand's functional impairment. In clinical practice, a dynamic splint enables the patient to stretch the affected finger independently. However, current dynamic splints have drawbacks, such as limited stretching efficacy, and interfere with the hand's functional activities. Therefore, this study aimed to develop a dynamic finger flexion orthosis capable of stretching each finger joint using additive manufacturing (AM) technology, thereby enabling hand functional activity, and analyze the clinical improvement in the range of motion (ROM)...

BACKGROUND: Osteochondritis dissecans (OCD) is a joint disorder predominantly affecting the knee, elbow, and ankle of children and adolescents. This comprehensive review delves into the epidemiology, etiology, clinical manifestations, diagnostic approaches, and treatment of OCD. RESULTS: The most common cause of OCD is repetitive microtrauma, typically associated with sports activities, alongside other significant factors such as genetic predisposition, ischemia, and obesity...

BACKGROUND: This study analysed changes in gait and pedobarography and subjective and functional outcomes after isolated Chopart joint injury. METHODS: The results of 14 patients were reviewed. Kinematic 3D gait analysis, comparative bilateral electromyography (EMG) and pedobarography were performed. RESULTS: On the injured side, the 3D gait analysis showed a significantly increased internal rotation and decreased external rotation of the hip and significantly decreased adduction and decreased range of motion (ROM) for the ankle...

INTRODUCTION: Multiplanar mesh plating of patella fractures has become more popular in recent years. It was the goal of this study to compare the biomechanical stability of cannulated screw with anterior tension band to multiplanar mesh plating for fixation of transverse patella fractures in cadaver specimens. MATERIALS AND METHODS: Eight matched pairs of fresh frozen cadaveric knees were obtained and soft tissues dissected leaving the extensor mechanism, joint capsule, and retinaculum intact...

The aim of the study was to evaluate the results of Dorsal Wrist Plating in intra-articular distal radius fractures with a dorsal displacement. In this prospective study, a single surgeon treated 20 patients with a (partially) intra-articular distal radius fracture with a dorsal rim avulsion or a dorsal Barton's type fragment. They all underwent an open reduction and internal fixation by Dorsal Wrist Plating. A total of 17 patients had a follow-up period of at least 12 months (mean follow- up of 17 months) and these patients were included in the study...

To arthroscopically evaluate the intra-articular structures before and after placement of an intramedullary tibial nail using the suprapatellar approach and to assess the 1-year results. All patients with a tibial fracture that underwent intramedullary tibial nailing using the suprapatellar approach with a minimal follow-up of 12 months were included. Diagnostic intraoperative knee arthroscopy was performed before and immediately after insertion of the IMN. A radiological and clinical evaluation and VAS score of the patients was collected postoperatively...

Acromioclavicular joint (ACJ) reconstruction using artificial ligaments is a common surgical treatment for Rockwood grade III or higher injuries. These techniques use bone tunnels in the clavicle and coracoid to insert the Tightrope implants. This multicenter retrospective study compares long term radiographic follow up of clavicular tunnel widening in two groups of patients with high-grade ACJ injury who underwent reconstruction using two different surgical techniques. The first group of 23 patients underwent an arthroscopic single clavicular tunnel ACJ reconstruction...