Prosthetic AND Fracture

STATEMENT OF PROBLEM: The type of veneer preparation is often chosen according to the patient's tooth structure and occlusion. Taking biomechanics into account in this decision-making process provides the clinician with more technical information on how to improve the clinical longevity of restorations. However, biomechanical analyses of veneer preparation designs are sparse. PURPOSE: The purpose of this 3-dimensional (3D) finite element analysis with microcomputed tomography (µCT) data obtained from realistic models was to assess the influence of different preparations for ceramic and composite resin veneers on restoration and resin layer stress distribution...

STATEMENT OF PROBLEM: Evidence comparing the survival of zirconia crowns with metal-ceramic crowns is sparse. Knowledge of their survival and a comparison of their clinical outcomes would improve clinical decision making. PURPOSE: The purpose of this university-based study was to compare the survival, failures, biological and technical complications encountered with zirconia and metal-ceramic crowns restored and followed up over a similar period. MATERIAL AND METHODS: This retrospective chart review consisted of 403 patients treated at the University of Toronto, Faculty of Dentistry, predoctoral dental clinic in whom zirconia (n=209) and metal-ceramic (n=306) crowns were inserted between September 2015 and July 2016 and followed for up to 7 years...

OBJECTIVES: Lithium silicate-based glass ceramics have evolved as a paramount restorative material in restorative and prosthetic dentistry, exhibiting outstanding esthetic and mechanical performance. Along with subtractive machining techniques, this material class has conquered the market and satisfied the patients' needs for a long-lasting, excellent, and metal-free alternative for single tooth replacements and even smaller bridgework. Despite the popularity, not much is known about the material chemistry, microstructure and terminal behaviour...

BACKGROUND: In acute treatment of radial head fractures, a radial head prosthesis can be considered if open reduction and internal fixation are not technically feasible. METHODS: We reviewed the data of 27 consecutive bipolar Judet radial head prostheses implanted in patients with unreconstructable radial head fractures and no other concomitant fractures (coronoid or olecranon factures). The lesions of the lateral collateral ligament were rated according to the McKee classification...

An intertrochanteric fracture is a prevalent and perilous kind of fracture that often affects older persons. A customized implant, proximal femoral nail anti-rotation Asia (PFNA2) is being used expressly in unstable intertrochanteric fractures in people with osteoporosis. In this case report, we examined a female osteoporosis patient, age 74, who underwent a failed PFNA2 procedure. Subsequently, the patient had bipolar hemiarthroplasty as a treatment. To prevent mechanical failure, it is crucial to strive for a high level of reduction quality and precise alignment of the central blade throughout hip X-ray procedures...

Grade 3 proximal humerus giant cell tumours are uncommon and the results of their surgical management with prosthetic replacement are not well established. We retrospectively studied patients with grade 3 giant cell tumours of proximal humerus treated with excision and prosthetic replacement from January 2009 and December 2018. We identified 13 patients who underwent tumour excision and prosthetic replacement. There were 7 (53.8%) men and 6 (46.2%) women. The mean age at diagnosis was 30.4 years (range 16-48 years)...

Background and objectives : wear and corrosion can lead to the gross failure of the Morse taper junction with the consequent fracture of the true neck of the prosthetic stem in hip arthroplasty. Materials and Methods : 58-year-old male patient, with a BMI of 38 kg/m2 . Because of avascular necrosis, in 2007, a metal-on-metal total hip arthroplasty was implanted in him, with a TMZF stem and a Co-Cr head. In December 2020, he complained of acute left hip pain associated with the deterioration of his left leg and total functional impairment, preceded by the crunching of the hip...

PURPOSE: The incidence of peri-implant femoral fractures (PIFF) is increasing. Information regarding outcomes, timing of surgery, risk factors, and a clinically applicable treatment algorithm are lacking. The aim of this study was to identify outcome-related risk factors and to derive a treatment algorithm. METHODS: Sixty-four PIFFs treated between 01.01.2006 and 31.12.2020 in a level I trauma centre were evaluated retrospectively for fracture pattern, surgical technique, risk factors, complications, and 1-year mortality...

OBJECTIVES: The objective was to discuss the research on zirconia published in the past 15 years to help the dental materials community understand the key properties of the types of zirconia and their clinical applications. METHODS: A literature search was performed in May/2023 using Web of Science Core Collection with the term "dental zirconia". The search returned 5102 articles, which were categorized into 31 groups according to the research topic. RESULTS: The current approach to improving the translucency of zirconia is to decrease the alumina content while increasing the yttria content...

BACKGROUND: Surgical treatment of musculoskeletal tumors in the periacetabular region present extremely difficult due to the complex anatomy and need for reconstruction. Orthopedic surgeons face more difficulties in patients with neurological conditions, which can cause increased muscle tone, an elevated risk of fractures, and compromised bone quality. There is limited evidence regarding endoprosthetic reconstruction for periacetabular tumors in individuals with neurological disorders...

Polylactic acid (PLA) polymer has garnered significant attention due to its biocompatibility. The incorporation of copper oxide (Cu2 O) nanoparticles into this polymer is expected to enhance its antibacterial, electrical, and thermal properties. This modification can potentially improve the performance of PLA in the fields of prosthetics manufacturing or printed circuit fabrication. However, the current research is rather focused on the mechanical properties of the PLA-Cu2 O nanocomposites. This research is thus aimed to analyze PLA-Cu2 O (97-3 wt%) nanocomposites with a double keyhole notch configuration both experimentally and numerically...

This study examines a complex scenario of structural valve degeneration (SVD) in a high surgical-risk patient with a previously implanted 25 mm Carpentier-Edwards (CE) Perimount Magna Ease 3300 (Irvine, CA: Edwards Lifesciences) surgical bioprosthetic valve (SAV), the patient presented with both paravalvular leak (PVL) and central prosthetic valve insufficiency (PVI). The patient was considered for a transaortic valve-in-valve (ViV) intervention with a self-expanding 29 mm Evolut R valve (Minneapolis, MN: Medtronic)...

Bisphosphonates have been associated with a decreased risk of revision surgery after total joint arthroplasty of the hip or knee (TJA) because of their effects on decreased periprosthetic bone loss and prosthetic migration. However, the results in the early literature are inconsistent, and the influence of bisphosphonates on associated complications and subsequent TJA remains unknown. This study investigated the association between the use of bisphosphonates and the risk of adverse outcomes after primary TJA...

PURPOSE: To compare the fracture load of two framework materials, zirconia and a new fiber-reinforced composite (FRC), for full-arch implant-supported rehabilitations using various cross- sections. MATERIAL AND METHODS: A cobalt-chromium metal model simulating the all-on-four concept and including 2 anterior straight and 2 posterior 45- degree angled multi-unit digital implant analogs was manufactured. 4 straight multi-unit abutments were screwed onto the implant analogs...

The study involved numerical FEA (finite element analysis) of dental implants. Based on this, fatigue tests were conducted according to the PN-EN 14801 standard required for the certification of dental products. Thanks to the research methodology developed by the authors, it was possible to conduct a thorough analysis of the impact of external and internal factors such as material, geometry, loading, and assembly of the dental system on the achieved value of fatigue strength limit in the examined object. For this purpose, FEM studies were based on identifying potential sites of fatigue crack initiation in reference to the results of the test conducted on a real model...

Nowadays, yttria (Y3+ )-stabilized ZrO2 (Y-TZP) is the most commonly used material in dental prosthetics. Y-TZP dental ceramics are mainly stabilized via the addition of 3 mol% yttrium oxide (Y2 O3 ). These ceramics exhibit excellent mechanical properties, including high flexural strength, fracture toughness, elastic modulus, etc. Some manufacturers have recently introduced a new class of dental materials with multilayer composition with the aim of combining the advantages of adding more or less Y2 O3 to the ceramic composition in one Y-TZP material...

» The application of artificial intelligence (AI) in the field of orthopaedic surgery holds potential for revolutionizing health care delivery across 3 crucial domains: (I) personalized prediction of clinical outcomes and adverse events, which may optimize patient selection, surgical planning, and enhance patient safety and outcomes; (II) diagnostic automated and semiautomated imaging analyses, which may reduce time burden and facilitate precise and timely diagnoses; and (III) forecasting of resource utilization, which may reduce health care costs and increase value for patients and institutions...

BACKGROUND: Knee peri-prosthetic femoral fractures (KPPFF) are becoming more frequent due to the increasing number of arthroplasties and the aging population, for whom maintaining autonomy and function remains a challenge. The use of locking plates has improved functional results and promoted the development of "minimally invasive" surgical (MIS) approaches. Despite the availability of literature comparing between different types of osteosynthesis for KPPFF, there is a paucity of information available on the complications of osteosynthesis using locking plates, depending on the approach...

BACKGROUND: Periprosthetic fractures after total knee arthroplasty (TKA) are a challenging problem due to complex fracture patterns, poor bone quality, and a high-risk patient population. Treatment of both periprosthetic fractures and aseptic complications can include revision TKA. In this study, we compared systemic and orthopaedic complications following periprosthetic fracture associated revision TKA to aseptic revision TKA. METHODS: This is a retrospective cohort study using data from the years 2010-2020 from a national administrative claims database...

STATEMENT OF PROBLEM: CAD/CAM occlusal veneers have been developed for minimally invasive prosthetic restoration of eroded teeth. Marginal adaptation and fracture resistance are crucial for the long-term survivability and clinical success of such restorations. Virgilite-based lithium disilicate glass-ceramic is a newly introduced material with claims of high strength. However, constructing occlusal veneers from this material of varying thickness has not been investigated. PURPOSE: The current study aimed to assess the impact of CAD/CAM occlusal veneer thickness and materials on marginal adaptation and fracture resistance...