Read by QxMD icon Read

total contact casting

Alexandre L Godoy-Santos, Laercio A Rosemberg, Cesar de Cesar-Netto, David G Armstrong
OBJECTIVE: To report a case of successful limb-salvage staged treatment in the treatment of an infected diabetic Charcot foot. CASE SUMMARY: A 45-year-old male with long-term, uncontrolled type 2 diabetes, six months' history of progressive deformity on the right foot and 45 days of purulent drainage in the lateral aspect of the foot. Patient was diagnosed with an infected Charcot foot with extensive midfoot bone involvement as shown by radiographic and MRI images...
January 1, 2019: Journal of Wound Care
F A García-Vázquez, P J Llamas-López, M A Jacome, L Sarrias-Gil, O López Albors
In recent decades, new artificial insemination (AI) methods, such as post-cervical AI (PCAI), have been developed in pig. PCAI involves crossing the cervix to deposit the sperm in the uterine body. Although PCAI application in sows is frequent, its application in nulliparous (gilts) females it is still limited due to the difficulty of passing through the cranial part of the cervical lumen. We hypothesized that ageing and parity would modify the cervical canal, facilitating the introduction of AI devices through the cervix...
January 10, 2019: Theriogenology
Sohail Yousaf, Edward J C Dawe, Alan Saleh, Ian R Gill, Alex Wee
Acute Charcot foot is a diagnostic challenge.The exact pathophysiology is not fully understood.Acute Charcot foot is often present with a history of trauma or cellulitis which does not respond to antibiotics.The condition is best managed within a multidisciplinary team.The mainstay of the treatment is mechanical off-loading and total contact casting.Surgery is reserved for select cases. Cite this article: EFORT Open Rev 2018;3:568-573. DOI: 10.1302/2058-5241.3.180003.
October 2018: EFORT Open Reviews
Siew Peng Neoh, Chulaluk Komoltri, Nita Viwattanatipa
OBJECTIVE: Using the cast-radiograph evaluation (CRE) score of the American Board of Orthodontics (ABO), the purpose of this study was 1) to find the post-treatment discrepancies that contributed to low-quality outcomes and 2) to identify if there might be any correlation between cephalometric changes and post-treatment discrepancies. MATERIALS AND METHODS: About 200 records submitted for the Thai Board of Orthodontics examination were analyzed. Overall, 23 parameters of the CRE scores and 12 cephalometric changes were collected...
2018: Journal of Orthodontic Science
Bénédicte Lepoittevin, Tamara Elzein, Diana Dragoe, Alice Bejjani, Frédéric Lemée, Jocelyne Levillain, Philippe Bazin, Philippe Roger, Isabelle Dez
Chitosan with its surface-properties and biodegradability is a promising biomaterial for green packaging applications. Till now, this application is still limited due to chitosan high sensitivity to water. Some existing studies deal with the incorporation of hydrophobic additives to enhance water-proof performances of chitosan films. As these additives may impair the film properties, our study focuses on chitosan efficient hydrophobization by means of simple and successful surface grafting reactions. Chitosan films prepared by solvent casting were modified by means of surface-initiated activators regenerated by electron transfer atom radical polymerization (SI-ARGET-ATRP) of 2-hydroxyethyl methacrylate (HEMA) followed by esterification reaction with fluorinated acyl compound...
February 1, 2019: Carbohydrate Polymers
Biswajit Sahu, Alok Prusty, Barsha Tudu
This study compared the treatment of total contact casting (TCC) with traditional dressing treatment (TD) in the management of neuropathic diabetic plantar ulcers. Thirty-one patients with plantar ulcers without any gross infection, osteomyelitis or gangrene were randomly assigned to the TCC group (n = 15) or TD group (n = 16). In the experimental group, TCC was applied on the initial visit and subjects were instructed to limit ambulation to one-third of their usual activity. Subjects in the control group (TD) were prescribed dressing changes and were advised against bearing weight on the involved extremity...
May 2018: Journal of Orthopaedic Surgery
Jiangning Wang, Lei Gao
Diabetic foot is one of the serious complications of diabetic patients. It is caused by diabetes combined with different degrees of lower extremity vascular lesions and neuropathy, and the wound can not heal for a long time. The serious results can cause bone marrow infection, bone destruction, and have high disability and death rate. At present, there are various treatment methods for diabetic foot chronic wound. On the basis of internal medicine controlling blood sugar, anti infection, lowering blood lipid, improving microcirculation and nourishment nerve, the surgical method is adopted, including the debridement of the necrosis in a short time to prevent the infection from spreading; maggot biological debridement and ozone chemical debridement will promote the growth of granulation tissue while controlling infection...
July 1, 2018: Chinese Journal of Reparative and Reconstructive Surgery
Meng Dang, Qi-Liang Deng, Guo-Zhen Fang, Dong-Dong Zhang, Hai-Jie Li, Jing-Min Liu, Shuo Wang
Herein, novel bifunctional smart films containing poly(styrene-butyl acrylate-ionic liquids) (P(S-BA-ILs)) and TiO2 were first prepared by a simple cast method and then used to demonstrate a superior bifunction of adsorption/desorption for dyes due to the property of reversible wettability switching and photodegradation under ultraviolet (UV) irradiation due to the addition of TiO2 . The glass transition temperature (Tg) of P(S-BA-ILs) latex was characterized using a differential scanning calorimeter (DSC)...
November 15, 2018: Journal of Colloid and Interface Science
Kewang Zheng, Wei Li, Boqiao Fu, Meifang Fu, Qiaolin Ren, Fan Yang, Caiqin Qin
More and more attention was attached to food safety, it is necessary to endow food packaging films with good antibacterial and antioxidant properties Edible films based on chitosan (CH), hardleaf oatchestnut starch (HOS) and Litsea cubeba oil (LEO) were prepared by solution casting. The properties and structures of the blend film with different proportion (xCH/yHOS) were evaluated. The CH-HOS films were firstly prepared by blending CH solution with HOS paste. The tensile strength (TS) and DPPH radical scavenging ability of CH-HOS films increased from 27...
October 15, 2018: International Journal of Biological Macromolecules
Kübra Yıldırım, Banu Saglam-Aydinatay
INTRODUCTION: The objective of this 2-arm parallel trial was to compare the effects of direct and indirect bonding techniques on the orthodontic treatment process and outcomes. METHODS: Thirty patients were randomly assigned to undergo bonding of brackets indirectly (group A, n = 15) or directly (group B, n = 15). Eligibility criteria included permanent dentition with bilateral Angle Class I molar and canine relationships, no previous orthodontic treatment, no skeletal discrepancy, and mild or moderate crowding...
July 2018: American Journal of Orthodontics and Dentofacial Orthopedics
Önder I Kılıçoğlu, Mehmet Demirel, Şamil Aktaş
Although there are various types of therapeutic footwear currently used to treat diabetic foot ulcers (DFUs), recent literature has enforced the concept that total-contact casts are the benchmark.Besides conventional clinical tests and imaging modalities, advanced MRI techniques and high-sensitivity nuclear medicine modalities present several advantages for the investigation of diabetic foot problems.The currently accepted principles of DFU care are rigorous debridement followed by modern wound dressings to provide a moist wound environment...
May 2018: EFORT open reviews
Manon Westra, Jaap J van Netten, Hendrik A Manning, Jeff G van Baal, Sicco A Bus
BACKGROUND: Non-removable knee-high devices, such as a total contact cast (TCC), are recommended for offloading diabetic plantar forefoot ulcers. However, it is insufficiently known how each of the different design characteristics of these devices contribute to offloading the diabetic foot. RESEARCH QUESTION: What is the offloading effect of the different design characteristics that make up a non-removable knee-high cast for people with diabetes and active or previous plantar forefoot ulcers? METHODS: Sixteen persons with diabetes, peripheral neuropathy and a healed or active plantar forefoot ulcer had their plantar pressures measured during walking in a non-removable knee-high device (TCC), in that device made removable (BTCC), in that device made below-ankle (cast shoe), in that cast shoe worn with a different walking sole and in a newly made cast shoe without a custom-moulded foot-device interface...
July 2018: Gait & Posture
Kyle Christensen, Brian Davis, Yifei Jin, Yong Huang
Additive manufacturing, or 3D printing, is a promising approach for the fabrication of biological structures for regenerative medicine applications using tissue-like materials such as hydrogels. Herein, inkjet printing is implemented as a model droplet-based 3D printing technology for which interfaces have been shown to form between printed lines within printed layers of hydrogel structures. Experimental samples with interfaces in two orientations are fabricated by inkjet printing and control samples with and without interfaces are fabricated by extrusion printing and casting, respectively...
August 1, 2018: Materials Science & Engineering. C, Materials for Biological Applications
Lien T Vu, Chao-Chang A Chen, Chia-Cheng Lee, Chia-Wei Yu
This study aims to develop a compensating method to minimize the shrinkage error of the shell mold (SM) in the injection molding (IM) process to obtain uniform optical power in the central optical zone of soft axial symmetric multifocal contact lenses (CL). The Z-shrinkage error along the Z axis or axial axis of the anterior SM corresponding to the anterior surface of a dry contact lens in the IM process can be minimized by optimizing IM process parameters and then by compensating for additional (Add) powers in the central zone of the original lens design...
April 20, 2018: Applied Optics
Yuki Tomita, Jun Uechi, Masahiro Konno, Saera Sasamoto, Masahiro Iijima, Itaru Mizoguchi
We compared the accuracy of digital models generated by desktop-scanning of conventional impression/plaster models versus intraoral scanning. Eight ceramic spheres were attached to the buccal molar regions of dental epoxy models, and reference linear-distance measurement were determined using a contact-type coordinate measuring instrument. Alginate (AI group) and silicone (SI group) impressions were taken and converted into cast models using dental stone; the models were scanned using desktop scanner. As an alternative, intraoral scans were taken using an intraoral scanner, and digital models were generated from these scans (IOS group)...
July 29, 2018: Dental Materials Journal
Ebtissam M Al-Madi, Samar A Al-Saleh, Reem I Al-Khudairy, Taibah W Aba-Hussein
PURPOSE: To determine the influence of iatrogenic gaps, type of cement, and time on microleakage of cast posts using spectrophotometer and glucose filtration measurements. MATERIALS AND METHODS: Forty-eight single-rooted teeth were divided into eight groups of six teeth each. Teeth were instrumented and obturated, and a cast post was fabricated. In addition to two control groups (positive and negative), a total of six groups were prepared: In four groups, an artificial 2- to 3-mm gap was created between post and residual gutta percha (GP), and two groups were prepared with intimate contact between post and residual GP...
November 2018: International Journal of Prosthodontics
Jonathan P Wiens, Gary R Goldstein, Mark Andrawis, Mijin Choi, Jennifer W Priebe
STATEMENT OF PROBLEM: Multiple definitions of centric relation (CR) have evolved over time that may have created confusion or impeded understanding. A recent attempt to achieve a singular definition by surveying the members of the Academy of Prosthodontics (AP) did not achieve majority consensus. PURPOSE: The purpose of this study was to identify those aspects or attributes within the existing definitions of CR in which there was agreement or disagreement among the members of the AP...
July 2018: Journal of Prosthetic Dentistry
Anthony Tickner, Cheri Klinghard, Jonathan F Arnold, Valerie Marmolejo
INTRODUCTION: As the majority of diabetic foot ulcerations (DFUs) occur on the plantar foot, excessive pressure is a major contributing factor to delayed healing. The gold standard for offloading is the total contact cast (TCC); yet, TCC use is contraindicated in patients with ischemia. Lower extremity ischemia typically presents in the more severe end stages of peripheral arterial disease (PAD). As PAD exists on a severity spectrum from mild to severe, designation of a clear cutoff where TCC use is an absolute contraindication would assist those who treat DFUs on a daily basis...
February 2018: Wounds: a Compendium of Clinical Research and Practice
Vinuta Hiremath, G Vinayakumar, Mallikarjuna Ragher, Sounyala Rayannavar, Mahantesh Bembalagi, B L Ashwini
Background: Latex protective barriers such as gloves and rubber dam material have been used widely in restorative procedures for crown and bridge. However, the chemical used during latex glove fabrication is thought to inhibit the polymerization of elastomeric impression materials used for impression making which has a detrimental effect on the dimensional accuracy and surface definition of resultant casts used for restorative procedures. The objectives of the study were to examine the surface of different elastomeric impressions on contact with various gloves...
November 2017: Journal of Pharmacy & Bioallied Sciences
Carlo E Poggio, Carlo Ercoli, Lorena Rispoli, Carlo Maiorana, Marco Esposito
BACKGROUND: Fixed prosthodontic treatment (crowns, fixed dental prostheses (FDPs), complete arch prostheses) involves the use of several different materials to replace missing tooth structure. Traditionally full metal or metal frameworks veneered with ceramic (metal-ceramic (MC)) have been used. In recent years several different metal-free systems have become available to clinicians and patients. In general, metal-free restorations should allow practitioners to better reproduce natural tooth colour, avoiding shortcomings of MC restorations...
December 20, 2017: Cochrane Database of Systematic Reviews
Fetch more papers »
Fetching more papers... Fetching...
Read by QxMD. Sign in or create an account to discover new knowledge that matter to you.
Remove bar
Read by QxMD icon Read

Search Tips

Use Boolean operators: AND/OR

diabetic AND foot
diabetes OR diabetic

Exclude a word using the 'minus' sign

Virchow -triad

Use Parentheses

water AND (cup OR glass)

Add an asterisk (*) at end of a word to include word stems

Neuro* will search for Neurology, Neuroscientist, Neurological, and so on

Use quotes to search for an exact phrase

"primary prevention of cancer"
(heart or cardiac or cardio*) AND arrest -"American Heart Association"