Pseudocapacitor*

A subclass of organic semiconductors known as conjugated polyelectrolytes (CPEs) is characterized by a conjugated backbone with ionic pendant groups. The water solubility of CPEs typically hinders applications of thin films in aqueous media. Herein, we report that films of an anionic CPE, namely CPE-K, drop cast from water produces single-component solid-state pseudocapacitive electrodes that are insoluble in aqueous electrolyte. That X-ray diffraction experiments reveal a more structurally ordered film, relative to the as-obtained powder from chemical synthesis, and dynamic light scattering measurements show an increase in aggregate particle size with increasing [KCl] indicate that CPE-K films are insoluble because of tight interchain contacts and electrostatic screening by the electrolyte...

As a typical pseudocapacitor material, VOx possesses mixed valence states, making it an ideal electrode material for symmetric screen-printed supercapacitors. However, its high internal resistance and low energy density are the main hurdles to its widespread application. In this study, a two-dimensional PANI@VOx nanobelt with a core-shell architecture was constructed via a two-step route. This strategy involves the preparation of VOx using a solvothermal method, and a subsequent in situ polymerization process of the PANI...

Crystal facet engineering is an effective strategy for precisely regulating the orientations and electrochemical properties of metal oxides. However, the contribution of each crystal facet to pseudocapacitance is still puzzling, which is a bottleneck that restricts the specific capacitance of metal oxides. Herein, α-MnO2 nanorods with different exposed facets were synthesized through a hydrothermal route and applied to pseudocapacitors. XRD and TEM results verified that the exposure ratio of active crystal facets was significantly increased with the assistance of the structure-directing agents...

Structural engineering and hybridization of heterogeneous 2D materials can be effective for advanced supercapacitor. Furthermore, architectural design of electrodes particularly with vertical construction of structurally anisotropic graphene nanosheets, can significantly enhance the electrochemical performance. Herein, MXene-derived TiO2 nanocomposites hybridized with vertical graphene is synthesized via CO2 laser irradiation on MXene/graphene oxide nanocomposite film. Instantaneous photon energy by laser irradiation enables the formation of vertical graphene structures on nanocomposite films, presenting the controlled anisotropy in free-standing film...

As a pseudocapacitor electrode material, molybdenum disulfide (MoS2 ) usually shows inferior capacity, rate capability and cyclability. Structural regulation and heteroatom doping are the available methods to ameliorate the electrochemical properties of MoS2 . Herein, phosphorus doped molybdenum disulfide regulated by sodium chloride (SP-MoS2 ) is successfully synthesized using phosphomolybdate acid as a molybdenum source and an in situ dopant and sodium chloride (NaCl) as a structural regulator. Under the structural regulation of NaCl, the SP-MoS2 nanosheets exhibit an interweaved architecture with a large interlayer spacing of 0...

Pseudocapacitors promise to fill the gap between traditional capacitors and batteries by delivering reasonable energy densities and power densities. In this work, pseudocapacitive charge storage properties are demonstrated for two isostructural oxides, Sr2LaFeMnO7 and Sr2LaCoMnO7. These materials comprise spatially separated bilayer stacks of corner sharing BO6 units (B = Fe, Co or Mn). The spaces between stacks accommodate the lanthanum and strontium ions, and the remining empty spaces are available for oxide ion intercalation, leading to pseudocapacitive charge storage...

Transition metal oxide-based supercapacitors have attracted much attention due to their high theoretical specific capacitances. However, due to an insufficient utilization ratio and poor intrinsic conductivity of active materials, the rate performance of these electrodes is usually low. Herein, oxygen defect-mediated NiCo2 O4 nanosheets with enhanced electrical conductivity (1.9 S m-1 vs. 0.2 S m-1 of original NiCo2 O4 NSs) are fabricated using a post NaBH4 reduction strategy (denoted as r-NiCo2 O4 NSs). The derived r-NiCo2 O4 materials have sheet-like morphology, increased oxygen defects and low valence metal species, and an unprecedented rate capability comparable to that of carbon-based electrode materials, with a satisfactory capacitance of 1812 F g-1 and 91...

In this work, the one-dimensional (1D) Ni-Co-Se nanowire arrays with rich grain-boundaries were prepared through the solvothermal method and gas-phase selenizaiton. The results showed that the structure and crystallization of the Ni-Co-Se nanowire arrays could be modulated through the optimization of selenizaiton time. The optimal Ni-Co-Se electrode sample displayed an area specific capacitance of 242.6 μAh cm-2 at 30 mA cm-2 with a current retention rate of 68.34%. The assembled Ni-Co-Se/Active carbon (AC) electrode-based asymmetric supercapacitor (ASC) showed the area specific capacitances of 329...

Recently, molybdenum disulfide (MoS2 ) has been extensively investigated as a promising pseudocapacitor electrode material. However, MoS2 usually exhibits inferior rate capability and cyclability, which restrain its practical application in energy storage. In this work, MoS2 nanoflowers regulated by Li2 SO4 (L-MoS2 ) are successfully fabricated via intercalating solvated Li ions. Via appropriate intercalation of Li2 SO4 , MoS2 nanosheets could self-assemble to form L-MoS2 nanoflowers with an interlayer spacing of 0...

Current aqueous supercapacitors (SCs) possess the relative low energy density, and there is therefore widespread interest in cost-effective fabrication of capacitive materials with promoted specific capacitance and/or broadened voltage window. Here, a redox-active azure C-decorated N-doped graphene aerogel (AC - NGA) is fabricated using a simple hydrothermal self-assembly method through strong noncovalent π-π interaction. AC - NGA highlights an excellent charge storage performance (a high 591F g-1 gravimetric capacitance under a current density of 1...

Anaerobic digestion (AD) is a promising method to treat organic matter. However, AD performance was limited by the inefficient electron transfer and metabolism imbalance between acid-producing bacteria and methanogens. In this study, a novel binary electroactive material (Fe3 O4 @biochar) with pseudocapacitance (1.4 F/g) and conductance (10.2 μS/cm) was exploited to store-release electrons as well as enhance the direct electron transfer between acid-producing bacteria and methanogens during the AD process...

Ultra-short laser pulses for in situ nanostructure generation (ULPING) enable the production of high-performance capacitive electrodes for pseudocapacitors, opening avenues for optimal electrode design. Here, we present a protocol for fabricating pseudocapacitor electrodes using ULPING. We describe steps for electrode fabrication, coin cell assembly, material characterization, and electrochemical analysis. Additionally, we present strategies for generating data and constructing machine learning algorithms to predict the electrochemical properties of the fabricated electrodes...

Two donor-acceptor type tetrathiafulvalene (TTF)-based covalent organic frameworks (COFs) are investigated as electrodes for symmetric supercapacitors in different electrolytes, to understand the charge storage and dynamics in 2D COFs. Till-date, most COFs are investigated as Faradic redox pseudocapacitors in aqueous electrolytes. For the first time, it is tried to enhance the electrochemical performance and stability of pristine COF-based supercapacitors by operating them in the non-Faradaic electrochemically double layer capacitance region...

In the process of radiation therapy (RT), the cytotoxic effects of excited electrons generated from water radiolysis tend to be underestimated due to multiple biochemical factors, particularly the recombination between electrons and hydroxyl radicals (·OH). To take better advantage of radiolytic electrons, we constructed WO3 nanocapacitors that reversibly charge and discharge electrons to regulate electron transportation and utilization. During radiolysis, WO3 nanocapacitors could contain the generated electrons that block electron-·OH recombination and contribute to the yield of ·OH at a high level...

Structural supercapacitors hold promise to expand the energy capacity of a system by integrating load-bearing and energy-storage functions in a multifunctional structure, resulting in weight savings and safety improvements. Here, we develop strategies based on interfacial engineering to advance multifunctional efficiency. The structural electrodes were reinforced by coating carbon-fiber weaves with a uniquely stable conjugated redox polymer and reduced graphene oxide that raised pseudocapacitive capacitance and tensile strength...

Understanding the deformation of energy storage electrodes at a local scale and its correlation to electrochemical performance is crucial for designing effective electrode architectures. In this work, the effect of electrolyte cation and electrode morphology on birnessite (δ-MnO2 ) deformation during charge storage in aqueous electrolytes was investigated using a mechanical cyclic voltammetry approach via operando atomic force microscopy (AFM) and molecular dynamics (MD) simulation. In both K2 SO4 and Li2 SO4 electrolytes, the δ-MnO2 host electrode underwent expansion during cation intercalation, but with different potential dependencies...

Transition metals (TMs) are being investigated as electrodes for pseudocapacitors, where an oxide layer is necessary to allow for rapid redox reactions. In this work, we utilized an in situ, rapid, binder-free, and green method for the fast fabrication of pseudocapacitor electrodes called ultrashort laser pulses for in situ nanostructure generation (ULPING) to form oxide layers on a titanium sheet. By utilizing this fabrication technique on a titanium sheet, a specific areal capacitance of 0.3579 mF cm-2 was achieved at a current density of 0...

Atomistic modeling of electrified interfaces remains a major issue for detailed insights in electrocatalysis, corrosion, electrodeposition, batteries, and related devices such as pseudocapacitors. In these domains, the use of grand-canonical density functional theory (GC-DFT) in combination with implicit solvation models has become popular. GC-DFT can be conveniently applied not only to metallic surfaces but also to semiconducting oxides and sulfides and is, furthermore, sufficiently robust to achieve a consistent description of reaction pathways...

Ultra-high energy density battery-type materials are promising candidates for supercapacitors (SCs); however, slow ion kinetics and significant volume expansion remain major barriers to their practical applications. To address these issues, hierarchical lattice distorted α-/γ-MnS@Cox Sy core-shell heterostructure constrained in the sulphur (S), nitrogen (N) co-doped carbon (C) metal-organic frameworks (MOFs) derived nanosheets (α-/γ-MnS@Cox Sy @N, SC) have been developed. The coordination bonding among Cox Sy , and α-/γ-MnS nanoparticles at the interfaces and the π-π stacking interactions developed across α-/γ-MnS@Cox Sy and N, SC restrict volume expansion during cycling...

Developing a cost-effective pseudocapacitor electrode manufacturing process incorporating binder-free, green synthesis methods and single-step fabrication is crucial in advancing supercapacitor research. This study aims to address this pressing issue and contribute to the ongoing efforts in the field by introducing ULPING (Ultra-short Laser Pulse for In-situ Nanostructure Generation) technique for effective design. Laser irradiation was conducted in ambient conditions to form a CuO/NiO hybrid structure providing a synergistic contribution to the electrical behavior of the electrode...