universal adhesives

The innovative technique of "presurgical lip, alveolus, and nose approximation" (PLANA) offers a new approach within the domain of presurgical infant orthopedics for infants born with cleft lip and palate. Presurgical lip, alveolus, and nose approximation introduces the utilization of the NoseAlign device in conjunction with medical adhesive tapes, designed to approximate and support displaced soft tissue nasolabial structures in patients with cleft, without an intraoral plate. The NoseAlign device, constructed from medical-grade silicone, consists of 2 tubular portions that fit into the nostrils, connected by a columella band...

Cells within tissues are subject to various mechanical forces, including hydrostatic pressure, shear stress, compression, and tension. These mechanical stimuli can be converted into biochemical signals through mechanoreceptors or cytoskeleton-dependent response processes, shaping the microenvironment and maintaining cellular physiological balance. Several studies have demonstrated the roles of Yes-associated protein (YAP) and its homolog transcriptional coactivator with PDZ-binding motif (TAZ) as mechanotransducers, exerting dynamic influence on cellular phenotypes including differentiation and disease pathogenesis...

"The grand orchestrator," "Universal Amplifier," "double-edged sword," and "Undruggable" are just some of the Myc oncogene so-called names. It has been around 40 years since the discovery of the Myc, and it remains in the mainstream of cancer treatment drugs. Myc is part of basic helix-loop-helix leucine zipper (bHLH-LZ) superfamily proteins, and its dysregulation can be seen in many malignant human tumors. It dysregulates critical pathways in cells that are connected to each other, such as proliferation, growth, cell cycle, and cell adhesion, impacts miRNAs action, intercellular metabolism, DNA replication, differentiation, microenvironment regulation, angiogenesis, and metastasis...

To incorporate different concentrations of Al2 O9 Zr3 (1%, 5%, and 10%) nanoparticles (NP) into the ER adhesive and subsequently assess the impact of this addition on the degree of conversion, μTBS, and antimicrobial efficacy. The current research involved a wide-ranging examination that merged various investigative techniques, including the application of scanning electron microscopy (SEM) for surface characterization of NP coupled with energy-dispersive x-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, μTBS testing, and microbial analysis...

BACKGROUND: To evaluate the physical properties of bioactive glass-modified universal multimode adhesive and its micro-tensile bond strength (µTBS) to artificially induced caries-affected dentin. METHODS: All bond universal adhesive was used in the study. Specimens were divided into 2 main groups: control unmodified adhesive and 5 wt% BAG modified adhesive. The degree of conversion, pH, bioactivity, and viscosity of the adhesives were tested with n = 5 for each test...

Diabetes mellitus is recognized as a major predisposing factor for Moraxella keratitis. However, how diabetes mellitus contributes to Moraxella keratitis remains unclear. In this study, we examined Moraxella keratitis; based on the findings, we investigated the impact of advanced glycation end products (AGEs) deposition in the cornea of individuals with diabetic mellitus on the adhesion of Moraxella isolates to the cornea. A retrospective analysis of 27 culture-proven cases of Moraxella keratitis at Ehime University Hospital (March 2006 to February 2022) was performed...

The inherent flammability of most polymeric materials poses a significant fire hazard, leading to substantial property damage and loss of life. A universal flame-retardant protective coating is considered as a promising strategy to mitigate such risks; however, simultaneously achieving high transparency of the coatings remains a great challenge. Here, inspired by the moth eye effect, we designed a nanoporous structure into a protective coating that leverages a hydrophilic-hydrophobic interactive assembly facilitated by phosphoric acid protonated amino siloxane...

OBJECTIVES: to assess the impact of universal adhesives, cured with single-peak and polywave LEDs, on the metabolic activity and cytokine release of human dental pulp stem cells (hDPSCs). In addition, analyze the degree of conversion (DC) of the adhesives cured with the different LEDs. METHODS: Discs (5 mm diameter, 1 mm thick) were prepared using three universal adhesives: Single Bond Universal (SBU, 3 M ESPE), Optibond Universal (OBU, Kerr), and Zipbond Universal (ZBU, SDI)...

The aim of this study is to investigate the repair bond strength of composite resin following three different surface treatments (bur-grinding, silanization, and Er,Cr:YSGG laser irradiation) using various universal adhesives. A total of 160 resin composite specimens, produced in cylindrical form (6 × 2 mm) with a nanohybrid composite resin within metal molds, were subjected to 5000 cycles of aging in a thermocycler. The aged samples were categorized into four groups based on surface treatments: control, bur, silane, and Er,Cr:YSGG laser...

Reversible adhesives are widely needed in our daily lives and industrial applications. However, robust and switchable adhesion on rough surfaces with on-demand attachment and detachment remains highly challenging. Here, we report a snail-mucus-inspired touch-responsive hydrogel (TRH), whose universal and robust adhesion is triggered by simple contact with the attaching surface. TRH is composed of a polymeric hydrogel and saturated sodium acetate (NaAc) and is prepared by one-pot synthesis. At room temperature, TRH remains in an amorphous and soft state, which allows it to conformally adapt to rough surfaces...

AIM: Long-term clinical success on indirect restorations is largely determined by bonding efficiency of the luting agent, with adhesion to dentin being the main challenge. Therefore, aim of this study was to assess the microtensile bond strength when using flowable resin composite, preheated resin composite and dual self-adhesive resin cement as dentin luting agents. MATERIALS AND METHODS: Occlusal thirds of molar teeth were cut and randomly divided into 3 groups to be cemented: RelyX™U200, Filtek™ Z250 XT- preheated to 70° and Filtek Flow™ Z350XT...

OBJECTIVE: This in vitro study aimed to evaluate the effectiveness of pretreatment with a self-etching primer for bonding aligner attachments to lithium disilicate (LD) and monolithic zirconia (MZ) ceramics. METHODS: Forty ceramics, including LD (n=20) and MZ (n=20), were divided into four study groups according to the surface pretreatments: LD specimens pretreated with universal primer (Monobond Plus, MP) after hydrofluoric acid etching (Group 1); MZ ceramics pretreated with MP after sandblasting (Group 2); LD ceramics pretreated with self-etching ceramic primer (Monobond etch & prime, MEP) (Group 3); and MZ ceramics pretreated with MEP after sandblasting (Group 4)...

OBJECTIVE: Placenta accreta belongs to placenta accreta spectrum and is defined by an adhesion or even invasion of the placental villi in the myometrium. The main risk factor is a history of cesarean section. Its incidence is increasing following an increase in the cesarean section rate in recent years and the cause of severe maternal morbidity (hemorrhage, transfusions, hysterectomy). Treatment can be radical by cesarean section-hysterectomy or conservative with an attempt at uterine preservation...

Flexible conductive hydrogels (FCHs) have attracted widespread interest as versatile monoliths that can be intricately integrated with various ingredients boasting multiple functionalities. The chemicophysical properties of FCHs cover a wide range, which significantly vary in their building blocks. However, achieving both favorable mechanical strength and high conductivity simultaneously through a facile approach remains a challenge. Herein, polyvinyl alcohol, dialdehyde cellulose nanofibrils, silver nanoparticles, borax, and tannic acid are readily "one-pot" incorporated into FCHs with great tensile stress (499 kPa), tensile strain (4591 %), and compressive stress (269 kPa) due to abundant hydrogen bonding, dynamic borate-diol bonding, and intermolecular acetalization...

Introduction In modern dentistry, the focus is more on preventing caries than on treating it, which helps preserve the tooth structure. Pit and fissure sealants (PFS) are the most effective methods for providing a mechanical barrier and avoiding the accumulation of dental plaque in deep pits and fissures, thereby preventing occlusal caries. The present study was conducted to compare the efficiency of dentin bonding agents (DBA) with or without fissurotomy in reducing microleakage before PFS placement. Materials and methods A total of 48 freshly extracted premolars were randomly divided into four groups as follows: Group 1, the conventional technique of PFS (Clinpro, 3M ESPE sealant); Group 2, fissurotomy performed before PFS placement; Group 3, Scotchbond Universal Adhesive (3M ESPE DBA) applied before PFS placement; and Group 4, fissurotomy along with DBA was used before PFS placement...

Background This study aimed to determine the antibacterial properties of orthodontic adhesive infused with stannous oxide nanoparticles (NPs) against Lactobacillus acidophilus and Streptococcus mutans bacteria, along with assessing the shear bond strength (SBS) of this composite when compared to conventional, non-infused composites. Methods A concentration of 1% w/w tin dioxide NPs (SnO2 NPs) was added to Transbond XT Orthodontic Adhesive. This modified composite material was used to prepare composite discs for the evaluation of its antibacterial properties against L...

This study aims to investigate the impact of storage conditions for crown fragments (specifically, whether they were stored within a tooth rescue box or in tap water) on their adhesion to fractured teeth when subjected to two different adhesive systems (namely, total etch and self etch). Sixty maxillary premolars were sectioned to obtain tooth fragments. These fragments were stored briefly (2 hours) and reattached in the following groups: Group 1 (fragments stored in tooth rescue box and reattached with etch and rinse (E&R) technique), Group 2 (fragments stored in tap water and reattached with E&R technique), Group 3 (fragments stored in tooth rescue box and reattached with self-etch (SE) technique), and Group 4 (fragments stored in tap water and reattached SE technique)...

OBJECTIVE: Chronic endometritis (CE) is an inflammatory condition with several different risk factors. We aimed to examine whether intrauterine abnormalities, such as endometrial polyps, submucosal myomas, intrauterine adhesions, or a septate uterus, were associated with an increased likelihood of developing chronic endometritis. METHODS: A cross-sectional study was conducted on 335 infertile women who underwent hysteroscopy surgery at the Ayatollah Taleghani Hospital Infertility Center, affiliated by Shahid Beheshti University of Medical Sciences, in 2022...

The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore® ; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore® ; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus)...

This study analyzed the dentin shear bond strength (SBS) of an etch-and-rinse (ER) or a self-etch (SE) adhesive incorporated with multifunctional polyhedral oligomeric silsesquioxanes (MA-POSS-8). An ER adhesive (Solobond Plus, VOCO GmbH, Cuxhaven, Germany) and a universal adhesive applied in SE mode (Scotchbond Universal, 3M, St. Paul, MN, USA) were infiltrated with MA-POSS-8 (Hybrid Plastics Inc., Hattiesburg, MS, USA) at 5 wt.% or 10 wt.%. Pure adhesives served as controls. Bovine dentin specimens were conditioned with one of the adhesives prior to the application of a nano-hybrid composite (Venus Diamond A3, Kulzer, Hanau, Germany)...