Pulsed light OR IPL

The behavior of stem cells is regulated by mechanical cues in their niche that continuously vary due to extracellular matrix (ECM) remodeling, pulsated mechanical stress exerted by blood flow, and/or cell migration. However, it is still unclear how dynamics of mechanical cues influence stem cell lineage commitment, especially in a 3D microenvironment where mechanosensing differs from that in a 2D microenvironment. In the present study, we investigated how temporally varying mechanical signaling regulates expression of the early growth response 1 gene (Egr1), which we recently discovered to be a 3D matrix-specific mediator of mechanosensitive neural stem cell (NSC) lineage commitment...

Objective: This article aims to review the safety and efficacy of the Er:YAG laser in debonding dental accessories. Methods: This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles published between 2010 and 2022 on the removal of dental accessories using erbium laser were searched. The selected articles were then classified according to the accessories used: adhesives, brackets, restorations, or implant crowns. Enamel surface roughness, shear bond strength, adhesive remnant index, duration time (t), pulp chamber temperature (T), morphology (M), and other variables were then noted...

Helium optically pumped sensor is widely used in the application for the detection of weak magnetic fields, and the cell is the core component of that, which needs an external excitation signal to ignite and maintain its luminosity, and its luminosity affects the sensitivity performance of the sensor. To improve the performance of the cell and reduce the power consumption of the system, which is the largest power consumption component in the sensor, this study presents the design of a driver circuit for a helium cell based on a high-voltage pulse source and high-frequency excitation source and uses a T-type impedance matching circuit to realize the efficient transmission of energy...

INTRODUCTION: Inhalant abuse is an important health issue especially among children and adolescents who often encounter these agents in the home. Research into the neurobiological targets of inhalants has lagged behind that of other drugs such as alcohol and psychostimulants. However, studies from our lab and others have begun to reveal how inhalants such as the organic solvent toluene affect neurons in key addiction related areas of the brain including the ventral tegmental area, nucleus accumbens and medial prefrontal cortex...

BACKGROUND: Despite advancements in coronary artery disease (CAD) treatment with drug-eluting stent, its morbidity and mortality remain high. In context, intravascular imaging-guided percutaneous coronary intervention (PCI) is increasingly recommended for better clinical outcomes in patient with CAD. Near-infrared spectroscopy-intravascular ultrasound (NIRS-IVUS), as one of the intravascular imaging methods, is effective in detecting lipid-rich plaques, which is crucial for identifying high-risk or vulnerable plaques employing near-infrared light...

No abstract text is available yet for this article.

Providing additional degrees of freedom to manipulate light, spatiotemporal optical vortex (STOV) beams carrying transverse orbital angular momentum are of fundamental importance for spatiotemporal control of light-matter interactions. Unfortunately, existing methods to generate STOV are plagued by various limitations such as inefficiency, bulkiness, and complexity. Here, we theoretically propose and experimentally demonstrate a microscale singlet platform composed of a slanted nanograting to generate STOV...

BACKGROUND: Pigmented lesions are largely benign and may lead to extreme distress. Various light and lasers may be used to treat pigmentation, often Q-switched lasers are considered the method of choice, while intense pulsed light (IPL) devices may offer a less invasive treatment with a shorter downtime. OBJECTIVE: The purpose of this study is to evaluate the safety and efficacy of a narrowband IPL module for the treatment of pigmented lesions. METHODS: A retrospective study of 20 patients with pigmented lesions underwent treatment with an IPL module...

BACKGROUND: IPL devices emit a wide range of wavelengths that can be absorbed by different chromophores in the skin. Selective destruction of a specific chromophore with minimal side effects is controlled by wavelength, pulse duration, and fluence. AIM: This study aims to evaluate the treatment of vascular and pigmented lesions using narrow-band Intense Pulsed Light (IPL) with Advanced Fluorescence Technology (AFT), which offers more efficient energy usage per pulse to increase safety, and improve clinical outcomes...

Photoplethysmography (PPG) uses light to detect volumetric changes in blood, and is integrated into many healthcare devices to monitor various physiological measurements. However, an unresolved limitation of PPG is the effect of skin pigmentation on the signal and its impact on PPG based applications such as pulse oximetry. Hence, an in-silico model of the human finger was developed using the Monte Carlo (MC) technique to simulate light interactions with different melanin concentrations in a human finger, as it is the primary determinant of skin pigmentation...

Laser state active controlling is challenging under the influence of inherent loss and other nonlinear effects in ultrafast systems. Seeking an extension of degree of freedom in optical devices based on low-dimensional materials may be a way forward. Herein, the anisotropic quasi-one-dimensional layered material Ta2 PdS6 was utilized as a saturable absorber to modulate the nonlinear parameters effectively in an ultrafast system by polarization-dependent absorption. The polarization-sensitive nonlinear optical response facilitates the Ta2 PdS6 -based mode-lock laser to sustain two types of laser states, i...

This work aims to demonstrate the potential of pulsed laser ablation synthesis (PLA) of tellurium nanoparticles (Te NPs) for use in matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) applications. An experimental laboratory setup for PLA synthesis of fresh Te NPs was designed to prevent unwanted aggregation of uncoated Te NPs and avoid the need to use additional modifiers. Performing pulsed laser ablation synthesis in liquid (PLAL) using acetone was found to be the optimal way of preparing Te NPs...

Reducing the south and reinforcing the north method (RSRN) has a positive effect on atherosclerosis disease. However, there is a lack of objective standards based on the quantification of 4 diagnostic methods in evaluating the improvement or effectiveness of the treatment. This study aimed to explore the quantitative evaluation of the therapeutic effect of RSRN on postmenopausal atherosclerosis based on the 4 diagnostic methods. The observational prospective cohort study was conducted at Longhua hospital Shanghai University of traditional Chinese medicine...

OBJECTIVES: Knowledge of the physical effects of pulsed dye laser (PDL) treatment of psoriatic lesions is essential in unraveling the remedial mechanisms of this treatment and hence also in maximizing in its disease-modifying potential. Therefore, the main objective of this study was to provide estimates of these physical effects (for laser wavelengths of 585 and 595 nm), with the aim of identifying pathogenic processes that may be affected by these conditions. METHODS: We modeled the laser light propagation and subsequent photothermal heating by numerically solving the transient diffusion and heat equations simultaneously...

Lithium-ion batteries are a key technology for electric vehicles. They are suitable for use in electric vehicles as they provide long range and long life. However, Lithium-ion batteries need to be controlled by a Battery Management System (BMS) to operate safely and efficiently. The BMS continuously controls parameters, such as current, voltage, temperature, state of charge (SoC), and state of health (SoH), and protects the battery against overcharging and discharging, imbalances between cells, and thermal runaways...

The scene projector (SP) can provide simulated scene images with same optical characteristics as the real scenes to evaluate imaging systems in hard-ware-in-the-loop (HWIL) simulation testing. The single scene generation device (SGD) based SP typically projects 8-bit images at 220 fps, which is insufficient to fulfill the requirements of ultra-high frame rate imaging systems, such as star trackers and space debris detectors. In this paper, an innovative quaternary pulse width modulation (PWM) based SP is developed and implemented to realize the ultra-high frame rate projection...

We investigated secondary cavitation bubble dynamics during laser-induced bubble formation in a small container with a partially confined free surface and elastic thin walls. We employed high-speed photography to record the dynamics of sub-mm-sized laser-induced bubbles and small secondary bubble clouds. Simultaneous light scattering and acoustic measurements were used to detect the oscillation times of laser-induced bubbles. We observed that the appearance of secondary bubbles coincides with a prolonged collapse phase and with re-oscillations of the laser-induced bubble...

We demonstrate a compact watt-level all polarization-maintaining (PM) femtosecond fiber laser source at 1100 nm. The fiber laser source is seeded by an all PM fiber mode-locked laser employing a nonlinear amplifying loop mirror. The seed laser can generate stable pulses at a fundamental repetition rate of 40.71 MHz with a signal-to-noise rate of >100 dB and an integrated relative intensity noise of only ∼0.061%. After two-stage external amplification and pulse compression, an output power of ∼1...

The Fractional Fourier Transform (FRT) corresponds to an arbitrary-angle rotation in the phase space, e.g., the time-frequency (TF) space, and generalizes the fundamentally important Fourier Transform. FRT applications range from classical signal processing (e.g., time-correlated noise optimal filtering) to emerging quantum technologies (e.g., super-resolution TF sensing) which rely on or benefit from coherent low-noise TF operations. Here a versatile low-noise single-photon-compatible implementation of the FRT is presented...

We present an efficient tunable all-silica-fiber 2nd-order cascaded Raman pulse laser utilizing 2-µm dissipative-soliton-resonance (DSR) rectangular pulses for pumping and highly GeO2 -doped silica fiber as Raman gain medium. When pumped at 1966.5 nm, the maximum 1st-order Raman optical conversion efficiency is up to 64.4% at 2153 nm, with 92.4% spectral purity and 0.39-W average power. The maximum 2nd-order Raman optical conversion efficiency is 19.3% at 2370 nm, with 39.2% spectral purity and 0...