orthodontic Bracket

BACKGROUND: Achieving the proper buccolingual inclination of teeth is a cornerstone in orthodontic treatment, directly impacting the attainment of ideal occlusal relationships and long-term stability. A practical torque expression that moves the tooth in its proper position across all three planes is imperative to finish orthodontic cases optimally. The primary focus of this research is to investigate Burstone's hypothesis about Warren torque springs when applied to the rectangular wire...

OBJECTIVE: The objective of the present study was to evaluate the effectiveness of transcutaneous electrical nerve stimulation (TENS) therapy on pain during the debonding procedure. METHODS: A placebo-controlled, randomized split - mouth study was conducted on 30 orthodontic patients. The right and left anterior teeth in the maxilla and mandible were randomly allocated to the control and experimental groups (EG) and were stimulated. TENS application was made through a modified electrode probe that was used from an ammeter...

No abstract text is available yet for this article.

Background This study aimed to determine the antibacterial properties of orthodontic adhesive infused with stannous oxide nanoparticles (NPs) against Lactobacillus acidophilus and Streptococcus mutans bacteria, along with assessing the shear bond strength (SBS) of this composite when compared to conventional, non-infused composites. Methods A concentration of 1% w/w tin dioxide NPs (SnO2 NPs) was added to Transbond XT Orthodontic Adhesive. This modified composite material was used to prepare composite discs for the evaluation of its antibacterial properties against L...

Background With the advent of 3D printing, many more possibilities have arisen for treatment planning. 3D rapid prototyping has enabled us to see a whole other dimension that has helped us to give the best possible care for our patients. With more and more advancements being made in this subject, it becomes necessary to check the reliability of the equipment and its effectiveness in the management of the problem at hand. This original study was conducted with the aim of checking the accuracy, dimensional stability, and reliability of orthodontic retainers made on a conventional and digitally fabricated model over a six-month period after debonding...

INTRODUCTION: The use of 3-dimensional (3D) printing techniques in fabricating crowns has increased the demand for bracket bonding onto these surfaces. The objective was to evaluate the shear bond strength (SBS) of orthodontic brackets bonded onto 3D-printed crowns using primer-incorporated orthodontic adhesives and 3D printing materials as orthodontic adhesives. METHODS: A total of 160 crowns were printed with 2 3D printing materials, DentaTOOTH (Asiga, Sydney, Australia) (group A) and NextDent C&B Micro Filled Hybrid (3D Systems, Soesterberg, Netherlands) (group N)...

OBJECTIVE: Measuring the condylar volume changes after treatment with skeletally anchored type IV Herbst appliance vs. Twin Force Bite Corrector (TFBC) in class II malocclusion in young adult patients. MATERIALS AND METHODS: Twenty class II malocclusion participants were randomly involved in our randomized clinical study. They are divided equally into two groups: group I (10 patients with an age range of 16 to 18 years and a mean age of (17.15 ± 0.62) (five males and five females) with a mean Angle formed between (A) point and (Nasion) point and (B) point, to determine anteroposterior relation between maxilla and mandible (ANB) of 6...

BACKGROUND: To evaluate and compare the distribution of stress and displacement of teeth during mandibular arch distalization using buccal shelf screws. MATERIALS AND METHODS: Three three-dimensional finite element models of mandibular arch were constructed with third molars extracted. Models 1, 2, and 3 were constructed on the basis of the lever arm heights of 0 mm, 3 mm, and 6 mm, respectively, between the lateral incisor and canine. A buccal shelf screw was placed at the area in the second molar region with the initial point of insertion being inter-dental between the first and second molars and 2 mm below the mucogingival junction...

BACKGROUND: Demineralization of the enamel surface, which appears as white spot lesions during and after removal of the fixed orthodontic appliance, is the most common disadvantage of the orthodontic treatment course. Using the remineralizing agents during and after orthodontic treatment helps to avoid those enamel defects. OBJECTIVE: The present study aims to assess the remineralizing effect of the chicken eggshell powder on the demineralized enamel surfaces after debonding the orthodontic bracket system...

AIM: The study aims to correlate the frictional forces (FF) of four different types of commercially available ceramic brackets to their surface topography. MATERIALS AND METHODS: Two monocrystalline (MC) brackets (CLEAR™, Adanta, Germany; Inspire ICE™, Ormco, USA), one polycrystalline (PC) bracket (Symetri Clear™, Ormco, USA), one clear hybrid esthetic bracket (DISCREET™, Adanta, Germany), and a stainless-steel (SS) bracket (Victory™, 3M Unitek, USA) served as control...

OBJECTIVE: This study aimed to evaluate enamel surface integrity and time consumed during residual cement removal after bracket debonding using different adhesive removal burs with and without a dental loupe. MATERIAL AND METHODS: Sixty human-extracted premolars were collected, cleaned, mounted, and prepared for orthodontic bracket bonding. Teeth were randomly divided into three main groups (n = 20) based on the adhesive removal method: tungsten carbide system (TC), sof-lex discs system (SD), and diamond system (DB) groups...

BACKGROUND: COVID-19 created an unexpected situation for dental patients. However, the impact of the lockdown on orthodontic patients is still unknown. Hence, this study was conducted to analyse the number and type of emergencies, distress and fear of getting infected among brackets and aligners orthodontic patients during the COVID-19 lockdown. MATERIAL AND METHODS: A total of 324 questionnaires about emergency appointments during the lockdown and Kessler Psychological Distress Scale-K10 were distributed between March and December 2022 among patients who were on active orthodontic treatment during lockdown at the Master of Orthodontics at the University Alfonso X el Sabio during February and December 2022...

BACKGROUND: Universal adhesive systems used for restorative clinical procedures are like orthodontics and may be a viable option. This study evaluated the effectiveness of universal adhesive systems in enhancing the durability of the shear bond strength (SBS) and adhesive remnant index (ARI) of orthodontic brackets to enamel. MATERIAL AND METHODS: 100 bovine incisors were divided into five groups (n=20), according to the applied adhesive systems: Primer Transbond XT; Ambar; Ambar Universal; Single Bond Universal; Adper Single Bond 2...

Background Monocortical mini-screw-type temporary anchorage devices (TADs), or mini-screws, have significantly impacted orthodontic treatment strategies, especially in severe crowding and protrusion cases. These devices offer flexibility in placement sites, but the chosen location can considerably influence tooth displacement patterns. Key factors include the 'line of force' and the biomechanical properties of orthodontic tools. By analyzing tension distribution and three-dimensional displacements, the finite element method (FEM) provides a thorough means to comprehend these patterns...

INTRODUCTION: The aim of this study was to assess the interaction between a 0.019×0.025-inch (″) stainless steel archwire and two types of passive self-ligating brackets with the same slot height (0.022″) and different slot depths (0.028″ and 0.026″, and to measure the archwire/slot play as well as to compare the torque expression with archwire torsions of 12°, 24°, and 36°. MATERIAL AND METHODS: An experimental device was developed along with a universal testing machine to measure torque expression in two types of brackets with 0...

AIM: To acquire a thorough comprehension of the photoactivated Cur-doped ZnONPs at different concentrations 0%, 2.5%, and 5% on the physical qualities, antibacterial efficacy, degree of conversion, and μshear bond strength between orthodontic brackets and the enamel surface. MATERIAL AND METHODS: An extensive investigation was carried out utilizing a range of analytical methods, scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, micro tensile bond strength (μTBS) testing, and evaluation of antibacterial effectiveness...

INTRODUCTION: Treatment of skeletal class II growing patients often requires the use of functional appliances, aimed at promoting mandibular advancement. Among these, Herbst appliance is recommended for its effectiveness, efficiency, and reduced need for compliance. Despite its skeletal favourable effects, well-known dental compensations can occur, especially when the appliance is not used close to the pubertal peak: upper incisors retroclination, lower incisors proclination, upper molars distalization and lower molars mesialization could reduce the overjet needed for a proper mandibular advancement...

Throughout treatment with fixed orthodontic appliances, effective plaque control is crucial to maintaining dental health. This in-vitro study evaluated the cleaning performance of eleven different brush heads of seven electric toothbrushes (oscillating-rotating and sonic motions) and varying brushing forces around orthodontic brackets. Six Mini Diamond® Twin brackets were placed on black-stained front teeth. Teeth were coated with white titanium oxide and brushed in a machine six times for one minute with two different brushing forces (1 N and 1...

BACKGROUND: Aim of the presented study was to investigate changes in clinical parameters and active matrix metalloproteinase-8 (aMMP-8) levels in gingival crevicular fluid of patients before and during treatment with multibrackets appliances. METHODS: Fifty-five adolescents scheduled for the treatment were included. Clinical parameters and subgingival samples were obtained at six time points: 1 week before appliance insertion (T0), 3 (T1), 6 (T2) weeks, 3 (T3), 6 (T4) months, and 1 year (T5) after that...

BACKGROUND: The objective is to compare the impact of clear aligner treatment (CAT) versus conventional fixed appliance treatment (FAT) on oral health-related quality of life (OHRQoL) among adults at five-time points: pretreatment (T0), 1 week (T1), 1 month after (T2), and 6 months after (T3) treatment initiation, and in the long-term follow-up (T4). MATERIALS AND METHODS: Search terms were based on Medical Subject Headings (MeSH) and non-MeSH. Potentially eligible studies compared OHRQoL in clear aligner (CA) and fixed appliance (FA) patients...