photonic crystal fiber

This paper demonstrates a high-energy, single-longitudinal-mode (SLM), actively Q -switched fiber laser based on the injection seeding technique. The large-mode-area double-cladding fiber is used as the gain medium to improve energy storage. Simultaneously, by using the linear electro-optic effect of the negative uniaxial crystal ( β - B a B 2 O 4 , BBO), a matching frequency-shift-free Q -switch with high damage threshold and high extinction-ratio is designed. Before reaching the stimulated Brillouin scattering threshold, the SLM Q -switched pulses can be achieved with energy higher than 15 µJ over a wide range of repetition rates from 10 to 80 kHz, and the maximum output power reaches 1...

Organic-inorganic atomically precise nanoclusters provide indispensable building blocks for establishing structure-property links in hybrid condensed matter. However, robust glasses of ligand-protected nanocluster solids have yet to be demonstrated. Herein, we show [Cu4 I4 (PR3 )4 ] cubane nanoclusters coordinated by phosphine ligands (PR3 ) form robust melt-quenched glasses in air with reversible crystal-liquid-glass transitions. Protective phosphine ligands critically influence the glass formation mechanism, modulating the glasses' physical properties...

We demonstrate the strong performance enhancement of an all-polarization-maintaining mode-locked fiber oscillator using a linear self-stabilized fiber interferometer via the suppression of the cross-phase modulation (XPM). Numerical simulations reveal that XPM significantly affects the saturable absorber dynamics resulting in strong distortions of the mode-locked steady-states and output pulse quality. For experimental verification, we construct an oscillator with XPM suppression, employing an intra-cavity YVO4 crystal to obtain a differential walk-off effect and compare its characteristics with a reference oscillator in a standard configuration...

Quantum dots are promising candidates for telecom single photon sources due to their tunable emission across the different low-loss telecommunications bands, making them compatible with existing fiber networks. Their suitability for integration into photonic structures allows for enhanced brightness through the Purcell effect, supporting efficient quantum communication technologies. Our work focuses on InAs/InP QDs created via droplet epitaxy MOVPE to operate within the telecoms C-band. We observe a short radiative lifetime of 340 ps, arising from a Purcell factor of 5, owing to integration of the QD within a low-mode-volume photonic crystal cavity...

Poly(styrene-methyl methacrylate-acrylic acid) photonic crystals (PCs), with five different sizes (170, 190, 210, 230 and 250 nm), were applied onto three plain fabrics, namely polyamide, polyester and cotton. The PC-coated fabrics were analyzed using scanning electronic microscopy and two UV/Vis reflectance spectrophotometric techniques (integrating sphere and scatterometry) to evaluate the PCs' self-assembly along with the obtained spectral and colors characteristics. Results showed that surface roughness of the fabrics had a major influence on the color produced by PCs...

Liquid crystals (LCs) have been adopted to induce tunable physical properties that dynamically originated from their unique intrinsic properties responding to external stimuli, such as surface anchoring condition and applied electric field, which enables them to be the template for aligning functional guest materials. We fabricate the fiber array from the electrically modulated (in-plain) nematic LC template using the chemical vapor polymerization (CVP) method. Under an electric field, an induced defect structure with a winding number of -1/2 contains a periodic zigzag disclination line...

PCF denotes photonic crystal fiber which is utilized for terahertz (THz) waveguides and cladding in the shape of a hexagon with two elliptical air apertures (AHs), which are discussed. Such differentiation is made: When the frequency is 1 THz, effective material loss (EML) to a minimum of 0.028 cm-1 has been achieved. Making use of the heptagonal photonic crystal fiber (He-PCF) architecture, every simulation result utilizing COMSOL Multiphysics software implements the perfectly match layer (PML) and finite element method (FEM) boundary conditions...

We report the continuous-wave (cw) difference-frequency generation (DFG) in a ZnGeP2 (ZGP) crystal that produces tunable long-wavelength infrared (LWIR) lasing. Particularly, we experimentally demonstrate the feasibility to drive DFG in ZGP by all-fiber near-infrared fiber lasers consisting of a 1.3 µm tunable cw random Raman fiber laser (RRFL) and a 1.5 µm erbium-doped fiber amplifier seeded by a tunable distributed feedback (DFB) laser, making the whole system compact and robust. As a result, the demonstrated LWIR DFG presents a broadband spectral tuning range spanning from 9...

We present a hybrid fiber/bulk laser source designed for CO2 and wind monitoring using differential absorption LIDAR (DIAL) and coherent detection at 2.05 µm. This source features a master oscillator power amplifier (MOPA) architecture made of four fiber stages and one single-pass, end-pumped, bulk amplifier. This Letter focuses on the single-pass bulk amplifier performance and on the hybrid architecture benefits for DIAL and coherent detection. The bulk material is a holmium-doped YLF crystal that provides high efficiency amplification at 2...

Benefitting from narrow beam divergence, photonic crystal surface-emitting lasers are expected to play an essential role in the ever-growing fields of optical communication and light detection and ranging. Lasers operating with 1.55 μm wavelengths have attracted particular attention due to their minimum fiber loss and high eye-safe threshold. However, high interband absorption significantly decreases their performance at this 1.55 μm wavelength. Therefore, stronger optical feedback is needed to reduce their threshold and thus improve the output power...

Supercontinuum (SC) light source has advanced ultrafast laser spectroscopy in condensed matter science, biology, physics, and chemistry. Compared to the frequently used photonic crystal fibers and bulk materials, femtosecond laser filamentation in gases is damage-immune for supercontinuum generation. A bottleneck problem is the strong jitters from filament induced self-heating at kHz repetition rate level. We demonstrated stable kHz supercontinuum generation directly in air with multiple mJ level pulse energy...

We demonstrate that through inserting a short length of highly birefringent small-core photonic crystal fiber (Hi-Bi SC-PCF) into a soliton fiber laser, the nonlinear polarization rotation effect in this laser can be manipulated, leading to continuous tuning of the output pulse parameters. In experiments, we observed that by adjusting the polarization state of light launched into the Hi-Bi SC-PCF and varying the cavity attenuation, the laser spectral width can be continuously tuned from ∼7.1 to ∼1...

Large-scale quantum networks rely on optical fiber networks and photons as so-called flying qubits for information transport. While dispersion and absorption of optical fibers are minimum at the infrared telecom wavelengths, most atomic and solid state platforms operate at visible or near-infrared wavelengths. Quantum frequency conversion is required to bridge these two wavelength regimes, and nonlinear crystals are currently employed for this process. Here, we report a novel approach of frequency conversion to the telecom band...

We investigate the properties of a soft glass dual-core photonic crystal fiber for application in multicore waveguiding with balanced gain and loss. Its base material is a phosphate glass in a P2 O5 -Al2 O3 -Yb2 O3 -BaO-ZnO-MgO-Na2 O oxide system. The separated gain and loss cores are realized with two cores with ytterbium and copper doping of the base phosphate glass. The ytterbium-doped core supports a laser (gain) activity under excitation with a pump at 1000 nm wavelength, while the CuO-doped is responsible for strong attenuation at the same wavelength...

Antiresonant hollow-core fiber (AR-HCF) exhibits unprecedented optical performance in low transmission attenuation, broad transmission bandwidth, and single spatial mode quality. However, due to its lower numerical aperture, when utilizing the Fiber-Enhanced Raman Spectroscopy (FERS) principle for gas detection, the efficiency of AR-HCF in collecting Raman signals per unit length is significantly lower than that of hollow-core photonic crystal fiber. Nonetheless, AR-HCF effectively suppresses higher-order modes and offers bandwidth in hundreds of nanometers...

We report on the continuous-wave (CW) and, for what we believe to be the first time, passively mode-locked (ML) laser operation of an Yb3+ -doped YSr3 (PO4 )3 crystal. Utilizing a 976-nm spatially single-mode, fiber-coupled laser diode as pump source, the Yb:YSr3 (PO4 )3 laser delivers a maximum CW output power of 333 mW at 1045.8 nm with an optical efficiency of 55.7% and a slope efficiency of 60.9%. Employing a quartz-based Lyot filter, an impressive wavelength tuning range of 97 nm at the zero level was achieved in the CW regime, spanning from 1007 nm to 1104 nm...

Surface enhanced Raman spectroscopy (SERS) is one of the most sensitive biosensing techniques that offers label free detection for a variety of applications. Generally, SERS spectroscopy is performed on nano-functionalized planar substrates with plasmonic structures or colloidal nanoparticles. Recently, photonic crystal fibers (PCFs) have gained great interest for SERS based bio sensing applications due to the immense advantages such as improved sensitivity, flexibility and remote sensing capability that it offers compared to the planar substrates...

We present the growth, spectroscopy, continuous-wave (CW) and passively mode-locked (ML) operation of a novel "mixed" tetragonal calcium rare-earth aluminate crystal, Yb3+ :Ca(Gd,Y)AlO4 . The absorption, stimulated-emission, and gain cross-sections are derived for π and σ polarizations. The laser performance of a c-cut Yb:Ca(Gd,Y)AlO4 crystal is studied using a spatially single-mode, 976-nm fiber-coupled laser diode as a pump source. A maximum output power of 347 mW is obtained in the CW regime with a slope efficiency of 48...

We present a novel micro-fabrication technique for creating concave surfaces on the endfacets of photonic crystal fibers. A fiber fusion splicer is used to generate arc discharges to melt and reshape the fiber endfacet. This technique can produce large spherical concave surfaces with roughness as low as 0.12 nm in various types of photonic crystal fibers. The deviation of fabricated surface and a spherical profile in the region of 70 µ m in diameter is less than 50 nm. The center of the concave surface and the fiber mode field are highly coincident with a deviation less than 500 nm...

We experimentally demonstrate optoacoustic cooling via stimulated Brillouin-Mandelstam scattering in a 50 cm long tapered photonic crystal fiber. For a 7.38 GHz acoustic mode, a cooling rate of 219 K from room temperature has been achieved. As anti-Stokes and Stokes Brillouin processes naturally break the symmetry of phonon cooling and heating, resolved sideband schemes are not necessary. The experiments pave the way to explore the classical to quantum transition for macroscopic objects and could enable new quantum technologies in terms of storage and repeater schemes...