Nanosilica

This study presents a new approach towards the production of sol-gel silica-coated Bi2 O3 /Gd2 O3 cement additives towards the improvement of early mechanical performance and radiation attenuation. Two types of silica coatings, which varied in synthesis method and morphology, were used to coat Bi2 O3 /Gd2 O3 structures and evaluated as a cement filler in Portland cement pastes. Isothermal calorimetry studies and early strength evaluations confirmed that both proposed coating types can overcome retarded cement hydration process, attributed to Bi2 O3 presence, resulting in improved one day compressive strength by 300% and 251% (depending on coating method) when compared to paste containing pristine Bi2 O3 and Gd2 O3 particles...

The formation of multiple delaminations is a frequently observed damage mechanism in composite materials, exerting a more pronounced influence on their strength properties compared to single delaminations. To tackle this issue, the incorporation of nanoparticles has been investigated as a means to enhance composite materials. This study aims to examine the effects of nano-additives, specifically carbon nanotubes and nanosilica, on the flexural behavior of glass/epoxy composites containing multiple embedded delaminations...

A series of nanosilica/AgI composites was synthesized by in situ reactions between silver nitrate and ammonium iodide deposited on the nanosilica surface using the gas-phase solvate-stimulated mechanosorption modification (GSSMSM) under both dry and wet conditions. The characterization of the synthesized materials was performed by X-ray diffraction (XRD), SEM/EDX (Scanning Electron Microscopy-Energy Dispersive X-ray), thermogravimetric (TGA) and gas sorption methods. As a result of the mechanosorption modification of nanosilica, the bulk density of the samples synthesized in the dry and wet medium increases from 45 g/l for initial nanosilica to 249 g/l and 296 g/l for the modified samples, respectively...

Entero-vulnerosorbents based on geometrically modified (GM) (mechanical treatment at different times, t MT = 1, 4, and 7 h) fumed nanosilica A300 (NS) and protein molecules (human serum albumin/GM-nanosilica systems) were characterized with a focus on their surface, morphology, topography, and thermal properties. Microscopic, spectroscopic, and analytical techniques, including atomic force microscopy (AFM), optical profilometry (OP), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and elemental analysis (CHN), were used...

Xanthene and acridine derivatives are interesting organic compounds that are used in different research fields like biomedicine and pharmaceutical science. However, applied catalysts for their synthesis have some limitations such as long reaction times, the need for harsh conditions and low yield. So, discovery of novel catalysts for the synthesis of xanthene and acridine derivatives is highly demanded. To overcome the limitation of previous methods on the efficient synthesis of 1,8-dioxo-octahydroxanthene and 1,8-dioxo-decahydroacridine derivatives, a green heterogeneous organic nano-catalyst (Cu@KCC-1- n Pr-HMTA) was synthesized by covalent attachment of hexamethylenetetramine to the cavities and channels of dendritic mesoporous nanosilica (KCC-1)...

The impact of electron beam radiation on the blend of linear low-density polyethylene (LLDPE) and polydimethylsiloxane (PDMS) rubber at different doses from 50 to 300 kGy has been investigated. The irradiated sheets were examined for their morphology, gel content, thermal stability, melt behavior, and electrical and dielectric properties. The radiation treatment has reduced both the melting point and crystallinity of base polymers and their blends because of chain scission. As observed, 100 kGy doses of irradiated blend and 3 wt % of loaded nanosilica composite showed comparatively good thermal stability...

The self-assembly of nanoparticles (NPs) at interfaces is currently a topic of increasing interest due to numerous applications in food technology, pharmaceuticals, cosmetology, and oil recovery. It is possible to create tunable interfacial structures with desired characteristics using tailored nanoparticles that can be precisely controlled with respect to shape, size, and surface chemistry. To address these functionalities, it is essential to develop techniques to study the properties of the underlying structure...

Poly (lactic acid) (PLA) composite films with the addition of mesoporous silica nanoparticles MSN (0, 2, 4 and 6 wt%) loaded with 10 wt% citral (CIT) were prepared for application in Chanterelles packaging. Composite films with added MSN/CIT showed good mechanical properties, especially 4MSN/CIT/PLA. Changes in physicochemical properties and bacterial flora of Chanterelles during packaging and storage were tested. Compared with CIT/PLA, Chanterelles packed with 4MSN/CIT/PLA showed about 1.62-times lower browning value, 1...

Polypyrrole (PPy) is a type of conducting polymer that has garnered attention as a potential electrode material for sustainable energy storage devices. This is mostly attributed to its mechanical flexibility, ease of processing, and ecologically friendly nature. Here, a polypyrrole-coated rice husk-derived nanosilica-reduced graphene oxide nanocomposite (SiO2 -rGO@PPy) as an anode material was developed by a simple composite technique followed by an in situ polymerization process. The architecture of reduced graphene oxide offers a larger electrode/electrolyte interface to promote charge-transfer reactions and provides sufficient space to buffer a large volume expansion of SiO2 , maintaining the mechanical integrity of the overall electrode during the lithiation/delithiation process...

This article describes the synthesis of nanosilica-cysteine composite (SiO2-Cys) and its application as a sorbent for arsenic(III) removal from different aqueous media. Attenuated total reflectance-Fourier-transform infrared spectroscopy, scanning and transmission electron microscopy, X-ray diffraction, and thermogravimetric analysis were applied to characterize SiO2-Cys. Using the batch technique, sorption of As(III) ion by SiO2-Cys was studied, and the effects of pH, sorbent dosage, temperature, initial concentration, and contact time were all taken into consideration...

The eco-friendly polymeric nanocomposite hydrogels were prepared by incorporating dendritic fibrous nanosilica (DFNS) and apple peel (AP) as reinforcements into the crosslinked polymer produced by cellulose (CL) and poly (glycerol tartrate) (TAGL) via gelation method and used for efficient adsorption of Pb2+ , Co2+ , Ni2+ , and Cu2+ metal ions. DFNS and DFNS/TAGL-CL/AP samples were characterized by FESEM, FTIR, TEM, TGA, and nitrogen adsorption/desorption methods. The results of TGA analysis showed that the thermal stability of the prepared hydrogels improved significantly in the presence of DFNS...

At a time of growing epidemic hazards caused by a very rapid evolution of dangerous pathogens, there is a pressing demand for bioactive textiles. Therefore, the development of high-quality knitted structures that could be used as bioactive protective materials has become a priority. This publication describes the fabrication of functional knitted structures from previously prepared antibacterial cellulose fibers containing nanosilica with immobilized silver nanoparticles. The structural and physical parameters of knitted fabrics made from them were studied with a view to their potential application in bioactive protective gloves...

Organic amine and nanosilica were combined to create a nano-demulsifier, which was employed in the oil-water separation process of a condensate emulsion. The nano-demulsifier has the structure of hyperbranched polymers and the skeleton structure of hyperbranched nanomaterials, and displays the demulsification impact of organic amine polymers as well as the synergistic effect of nanomaterials. This nano-demulsifier has the potential to drastically reduce the quantity of condensate demulsifiers utilized in the gathering station...

As a common additive in cigarette filters, nanosilica has been implemented to reduce the release of harmful substances in cigarette smoke. However, the potential risk of occupational exposure for cigarette factory workers is unknown. We collected physical examination data from 710 cigarette factory workers to evaluate the adverse effects of cigarette filter silica exposure. We also established mouse models induced by cigarette filter silica and crystalline silica separately to compare the lung inflammation, pulmonary function, apoptosis, and fibrosis of the two models...

Despite the widespread application of ultrasmall nanosilica, solving its aggregation problem during the preparation process remains a challenge. In this paper, ultrasmall nanosilica with a controllable size and aggregates were prepared through the water-in-oil (W/O) emulsion method by using polyisobutylene succinic anhydride-type polymeric surfactants (PIBSA-X) as an isolating agent. PIBSA-X polymeric surfactants with different hydrophilic groups were prepared using industrial-grade PIBSA, which can form stable W/O-type emulsions well...

In the process of drilling oil and gas wells, the shrinkage and falling of wellbore walls are often caused by the expansion of mud shale water. To date, conventional additives have been unable to plug the pore throats of shale rock with nanoscale pores and thus cannot effectively solve the problem of wellbore instability encountered in shale formation drilling. In view of this situation, the idea of using nanosilica to plug the nanopore throat of mud shale is proposed to reduce its permeability and to slow water intrusion...

This study presents the successful development of printable-microencapsulated ascorbic acid (AA) for personalized topical delivery using laser printing technology. Rice flour with a 10% AA content was selected as an encapsulation material. Hydrophobic nanosilica was used to create negative electrostatic charges on the microencapsulated surfaces via a high-speed mixture. This process facilitated the microencapsulated AA fabrication using a commercial laser printer and produced a well-patterned design with some minor print defects, such as banding and scattering...

When silica nanoparticles (SiNP) reach the water bodies interact with the already existing pollutants in the environments. This study aimed to evaluate the ecotoxicity of SiNP under the presence/absence of Cu in mosquitofish (Gambusia holbrooki). Fish were exposed to 0, 10 and 100mg SiNP L-1 , alone or mixed with Cu (0.25mgL-1 ). After 96h, the amount of colony forming units (CFU) of bacteria living on the skin mucus was analysed, and oxidative stress, tissue damage enzymes, and neurotoxicity were evaluated...

Impairing plant growth and reducing crop production, salinity is considered as major problem in modern agriculture. The current study aimed to investigate the role of seeds' heat pretreatment at 45 °C as well as application of two different nanoparticles nanosilica (N1) and nanoselenium (N2) in reducing salinity stress in three genotypes of Egyptian commercial soybeans ( Glycine max L.). Two levels of salt stress using diluted sea water (1/12 and 1/6) were tested either alone or in combination with protective treatments...

PURPOSE: To investigate the effects of airborne-particle abrasion and nanosilica (nano-Si) infiltration treatment on the surface characteristics of dental zirconia. MATERIALS AND METHODS: A total of 15 unsintered zirconia ceramic green bodies (10 × 10 × 3 mm) were divided into three groups (n = 5): Group C, no treatment after sintering; Group S, airborne-particle abrasion with 50-μm aluminum oxide particles after sintering; and Group N, infiltration of nano-Si followed by sintering and hydrofluoric acid (HF) etching...