Functionalization of graphene

Due to the ubiquitous and inexhaustible solar source, photothermal materials have gained considerable attention for their potential in heating and de-icing. Nevertheless, traditional photothermal materials, exemplified by graphene, frequently encounter challenges emanating from their elevated reflectance. Inspired by ocular structures, this study uses the Fresnel equation to enhance the photo-thermal conversion efficiency of graphene by introducing a polydimethylsiloxane (PDMS)/silicon dioxide (SiO2 ) coating, which reduces the light reflectance (≈20%) through destructive interference...

The development of advanced functional nanomaterials for solid-phase microextraction (SPME) remains an imperative aspect of sample pretreatment. Herein, we introduce a novel SPME fiber consisting of graphene fibers modified with ordered mesoporous carbon nanotubes arrays (CNTAs) tailored for the determination of benzene series in oilfield wastewater, which is synthesized by an ionic liquid-assisted wet spinning process of graphene nanosheets, followed by a precisely controlled growth of metal-organic framework and subsequent pyrolysis treatment...

HYPOTHESIS: Graphene quantum dots (GQDs) with various functional groups are hypothesized to inhibit the α-synuclein (αS) dimerization, a crucial step in Parkinson's disease pathogenesis. The potential of differently functionalized GQDs is systematically explored. EXPERIMENTS: All-atom replica-exchange molecular dynamics simulations (accumulating to 75.6 μs) in explicit water were performed to study the dimerization of the αS non-amyloid component region and the influence of GQDs modified with various functional groups...

A direct focused He+ beam direct machining is presented to fabricate solid-state nano-disk at the surface of a graphene multilayer micro-flake deposited on an Au/Ti/sapphire surface. At irradiation doses larger than 5.0×1017 ions/cm2 and with a beam size well below 1 nm, graphene disks down to 20 nm in diameter have been machined with for nano-disk down to 50 nm in diameter, a central hole for preparing the positioning of a rotation axle. The local heat generated by this irradiation is inducing a partial graphene amorphization and deformation, leading to a complete graphene nano-disk vaporization at doses larger than 5×1018 ions/cm2...

Tumor-marker immunosensors for rapid on-site detection have not yet been developed because of immunoreaction bottlenecks, such as shortening the reaction time and facilitating incubation. In this study, a gold-boron-nitrogen-codoped graphene (Au-BNG)-based immunosensor antenna was constructed for the rapid detection of neuron-specific enolase (NSE). A Au-BNG radiation electrode with dual functions of antibody protein fixation and signal transmission was developed for the first time. A radiation sample cell was constructed by embedding a radiation electrode into the groove of a poly(dimethylsiloxane) dielectric substrate...

CONTEXT: To unravel the effects of the C vacancy, doping N type and number, the adsorption of HCHO and O2 was investigated on the graphene (Gr)-based supported Pt single atom by density functional theory calculations. The electronegativity of the vacancy and N-doped Gr was a crucial factor both for the anchoring for a Pt and the further adsorption of HCHO and O2 on the supported Pt. The electronegativity can be tuned by the C vacancy number (1V and 2V), the doping N type (graphitic-N, pyridinic-N and pyrrolic-N) and the doping pyridinic-N number (1N ~ 4N)...

The construction of an antibacterial biological coating on titanium surface plays an important role in the long-term stability of oral implant restoration. Graphene oxide (GO) has been widely studied because of its excellent antibacterial properties and osteogenic activity. However, striking a balance between its biological toxicity and antibacterial properties remains a significant challenge with GO. ε-poly-L-lysine (PLL) has broad-spectrum antibacterial activity and ultra-high safety performance. Using Layer-by-layer self-assembly technology (LBL), different layers of PLL/GO coatings and GO self-assembly coatings were assembled on the surface of titanium sheet...

Recently, global-scale efforts have been conducted for the electroreduction of CO2 as a potentially beneficial pathway for the conversion of greenhouse gases to useful chemicals and renewable fuels. This study focuses on the development of selective and sustainable electrocatalysts for the reduction of aqueous CO2 to CO. A RuII complex [Ru(tptz)(ACN)Cl2 ] (RCMP) (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine, ACN = acetonitrile) was prepared as a molecular electrocatalyst for the CO2 reduction reaction in an aqueous solution...

Lanthanides are largely used in optoelectronics as dopants to enhance the physical and optical properties of semiconducting devices. In this study, lanthanum(III)hydroxide nanoparticles (La(OH)3 NPs) are used as a dopant of polyethylenimine (PEI)-functionalized nitrogen (N)-doped graphene quantum dots ( PEI-N GQDs ). The La(OH) 3 NPs-doped PEI-N GQDs nanocomposites are prepared from La(NO)3 in a single step by a green novel method and are characterized by Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM)...

3D composite electrodes have shown extraordinary promise as high mass loading electrode materials for sodium ion batteries (SIBs). However, they usually show poor rate performance due to the sluggish Na+ kinetics at the heterointerfaces of the composites. Here, a 3D MXene-reduced holey graphene oxide (MXene-RHGO) composite electrode with Ti─O─C bonding at 2D heterointerfaces of MXene and RHGO is developed. Density functional theory (DFT) calculations reveal the built-in electric fields (BIEFs) are enhanced by the formation of bridged interfacial Ti─O─C bonding, that lead to not only faster diffusion of Na+ at the heterointerfaces but also faster adsorption and migration of Na+ on the MXene surfaces...

Integrating low-dimensional graphene oxide (GO) with conventional Si technology offers innovative strategies for developing ultrafast wideband photodetectors. In this study, we synthesized GO and explored its potential application in broadband photodetection alongside silicon heterostructures. The as-synthesized GO contains various oxygen functional groups, as evidenced by X-ray photoelectron and Fourier transform infrared spectroscopy. These functional groups contribute to increased photo absorption, enhancing photodetection performance...

Carbon-based nanomaterials, such as carbon nanoplatelets, graphene oxide, and carbon quantum dots, have many possible end-use applications due to their ability to impart unique mechanical, electrical, thermal, and optical properties to cement composites. Despite this potential, these materials are rarely used in the construction industry due to high material costs and limited data on performance and durability. In this study, domestic coal is used to fabricate low-cost carbon nanomaterials that can be used economically in cement formulations...

Driven by climate change and human activity, Sargassum blooming rates have intensified, producing copious amount of the invasive, pelagic seaweed across the Caribbean and Latin America. Battery recycling and lead-smelter wastes have heavily polluted the environment and resulted in acute lead poisoning in children through widespread heavy metal contamination particular in East Trinidad. Our study details a comprehensive investigation into the use of Sargassum (S. natans), as a potential resource-circular feedstock for the synthesis of calcium alginate beads utilized in heavy metal adsorption, both in batch and column experiments...

Nitric oxide (NO) donating drugs such as organic nitrates have been used to treat cardiovascular diseases for more than a century. These donors primarily produce NO systemically. It is however sometimes desirable to control the amount, location, and time of NO delivery. We present the design of a novel pH-sensitive NO release system that is achieved by the synthesis of dipeptide diphenylalanine (FF) and graphene oxide (GO) co-assembled hybrid nanosheets (termed as FF@GO) through weak molecular interactions...

Herb-based extracellular vesicles (EV), inherently replete with bioactive proteins, RNA, lipids, and other medicinal compounds, are noncytotoxic and uniquely capable of cellular delivery to meet the ever-stringent challenges of ongoing clinical applications. EVs are abundant in nature, affordable, and scalable, but they are also incredibly fragile and stuffed with many biomolecules. To address the low drug binding abilities and poor stability of EVs, we demonstrated herb-based EVs (isolated from neem, mint, and curry leaves) conjugated with chitosan (CS) and PEGylated graphene oxide (GP) that led to their transformation into robust and efficient vectors...

Computational simulations through density functional theory in conjunction with M06-L and HSE functional have been carried out to investigate the chemical reactivity of the germanene monolayer. It is exceptionally reactive, with an average reaction energy of -60.4 kcal mol-1 for the nineteen functional groups considered: H, F, Cl, Br, O, S, Se, Ge, OH, SH, CH3 , CF3 , NH, NH2 , C6 H5 , C6 H4 , CCl2 , CBr2 , and the azomethine ylide. The results indicate that oxygen is the most reactive reagent (-96.9 kcal mol-1 ), followed by fluorine (-83...

Defects such as grain boundaries (GBs) are almost inevitable during the synthesis process of 2D materials. To take advantage of the fascinating properties of 2D materials, understanding the nature and impact of various GB structures on pristine 2D sheets is crucial. In this work, using an evolutionary algorithm search, we predict a wide variety of silicene GB structures with very different atomic structures compared with those found in graphene or hexagonal boron-nitride. Twenty-one GBs with the lowest energy were validated by density functional theory (DFT), a majority of which were previously unreported to our best knowledge...

Borophene, owing to the high mobility and long spin coherent length of its carriers, presents significant opportunities in ultrafast spintronics. In this research, we investigate the spin-dependent conductance of a Datta-Das field-effect transistor (FET) based on an armchair β12 -borophene nanoribbon (BNR) using the tight-binding (TB) Hamiltonian in combination with the non-equilibrium Green's function (NEGF) method. The spin FET electrodes are magnetized by ferromagnetic (FM) insulators arranged in both parallel and anti-parallel configurations...

Hybrid nanozyme graphene quantum dots (GQDs) deposited TiO2 nanotubes (NTs) on titanium foil (Ti/TiO2 NTs-GQDs) were manufactured by bestowing the hybrid with the advantageous porous morphology, surface valence states, high surface area, and copious active sites. The peroxidase-like activity was investigated through the catalytic oxidation of chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2 O2 , which can be visualized by the eyes. TiO2 NTs and GQDs comprising oxygen-containing functional groups can oxidize TMB in the presence of H2 O2 by mimicking peroxidase enzymes...

It is well-established that multi-scale porous scaffolds can guide axonal growth and facilitate functional restoration after spinal cord injury (SCI). In this study, we developed a novel mussel shell-inspired conductive scaffold for SCI repair with ease of production, multi-scale porous structure, high flexibility, and excellent biocompatibility. By utilizing the reducing properties of polydopamine, non-conductive graphene oxide (GO) was converted into conductive reduced graphene oxide (rGO) and crosslinked in situ within the mussel shells...