SBA-15

A new mononuclear Cu(II) complex [Cu(L2 )(H2 O)2 ], where L is the Schiff base 2-[2-(3-bromopropoxy)benzylideneamino] benzoic acid, was synthesized and covalently anchored onto an amino-functionalized SBA-15 mesoporous silica in order to obtain an efficient heterogeneous catalyst. The elemental, structural, textural and morphological characterization confirmed the coordination of the central Cu(II) ion with two ligands and two H2 O molecules in the synthesized complex and its successful immobilization into the inner pore surface of the NH2 -functionalized support without the loss of the mesoporous structure...

Herein, ordered mesoporous materials like SBA-15 and Al/SBA-15 were prepared using the pH adjustment method. Thus, these materials were developed in different pH of synthesis, from the pH adjustment method using a KCl/HCl solution and varying the Si/Al molar ratio (5, 25, and 75). All the ordered mesoporous materials were characterized by FRX, 27 Al NMR, SEM, XRD, N2 adsorption/desorption, and CO2 adsorption. From the applied method, it was possible to obtain SBA-15 and Al/SBA-15 with high mesoscopic ordering based on the XRD patterns, independent of the pH employed...

Inorganic metal halide perovskite CsPbX3 (X = I, Br, and Cl) nanocrystals (NCs) are rapidly developed due to their excellent photophysical properties and potential applications in lighting, lasers, and scintillators. However, the materials for growing perovskite NCs are insoluble or hydrolyzed in most green solvents, limiting their further development. Based on rational chemical analysis, an alkali-metal-assisted green-solvent synthesis method for in situ growth of CsPbBr3 NCs within SAPO-34 zeolite with bright luminescence is developed...

Infiltration of the mesoporous structure of SBA-15 silica as a hard template with phenanthroline complexes of Fe3+ and Co2+ allowed the simultaneous dispersion of nitrogen, iron and cobalt species on the surface of the obtained carbonaceous CMK-3 silica replica, with potential as bifunctional heterogeneous catalysts for the cathodic oxygen reduction and evolution reactions (ORR and OER). The textural properties and mesopore structure depended on the composition of the material. The carbonaceous FeCoNCMK-3 (1/1), obtained with an Fe/Co molar ratio of 1/1, exhibited an ordered cylindrical mesoporous structure with a high mesopore volume, a rather homogeneous composition in terms of total and surface concentrations of iron and cobalt, and a balanced presence of pyridinic-, pyrrolic- and graphitic-N species...

A novel single-atom Ni(II) catalyst (Ni-OH) is covalently immobilized onto the nano-channels of mesoporous Santa Barbara Amorphous (SBA)-15 particles and isotropic Anodized Aluminum Oxide (AAO) membrane for confined-space ethylene extrusion polymerization. The presence of surface-tethered Ni complexes (Ni@SBA-15 and Ni@AAO) is confirmed by the inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray photoelectron spectroscopy (XPS). In the catalytic spinning process, the produced PE materials exhibit very homogeneous fibrous morphology at nanoscale (diameter: ~50 nm)...

Chlorhexidine dodecyl sulfate (CHX-DS) was synthesized and characterized via single-crystal X-ray diffraction (SC-XRD), 1 H nuclear magnetic resonance (NMR) spectroscopy, 1 H nuclear Overhauser effect spectroscopy (NOESY), and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR). The solid-state structure, comprising a 1 : 2 stoichiometric ratio of chlorhexidine cations [C22 H30 Cl2 N10 ]2+ to dodecyl sulfate anions [C12 H25 SO4 ]- , is the first report of chlorhexidine isolated with a surfactant...

A wetness impregnation method was used to impregnate the substrate with a substantial quantity of oleic acid together with a metal precursor, leading to significantly dispersed Ni-Fe bimetallic catalysts based on mesoporous SBA-15. Using a wide variety of characterization methods, such as XRD, BET, and TEM Analysis, the physiochemical properties of the catalyst were determined. The addition of the metal does not have any effect on the structural characteristics of the SBA-15 catalyst, as validated by transmission electron microscopy (TEM), which shows that the prepared SBA-15 supported catalyst has a hexagonal mesoporous structure...

Optimized sustainable procedures in both acidic and basic conditions are considered to meet some of the current environmental challenges of the scientific community. In this paper, the successful syntheses of two classes of indium-based silica nanomaterials are reported. Both procedures were conceived to enhance the sustainability of the synthesis methods and promote their preparations at room temperature while avoiding the hydrothermal treatment under static conditions at 100 °C. A fast, room-temperature synthesis of porous nanospheres was conceived together with an "acid-free" procedure for SBA-15-like materials...

Spatially confined photocatalysis has emerged as a viable strategy for the intensification of various redox reactions, but the influence of confined structure on reaction behavior is always overlooked in gas-solid reactions. Herein, we report a nanomembrane with confining Cs3Bi2Br9 nanocrystals inside vertical channels of porous insulated silica thin sheets (CBB@SBA(⊥)) for photocatalytic nitric oxide (NO) abatement. The ordered one-dimensional (1D) pore channels with mere 70 nm channel length provide a highly accessible confined space for catalytic reactions...

In this work, a series of Cu2 Se/ x wt % porous carbon (PC) ( x = 0, 0.2, 0.4, 0.6, 0.8, 1) composite materials were synthesized by ball milling and spark plasma sintering (SPS). The highly ordered porous carbon was synthesized by a hydrothermal method using mesoporous silica (SBA-15) as the template. X-ray diffraction results show that the incorporation of porous carbon induces a phase transition of Cu2 Se from the β phase to the α phase. Meanwhile, the addition of porous carbon reduces the carrier concentration from 2...

In an effort to develop efficient vaccine formulations, the use of ordered mesoporous silica (SBA-15) as an antigen carrier has been investigated. SBA-15 has required properties such as high surface area and pore volume, including narrow pore size distribution to protect antigens inside its matrix. This study aimed to examine the impact of solvent removal methods, specifically freeze-drying and evaporation on the intrinsic properties of an immunogenic complex. The immunogenic complexes, synthesized and incorporated with BSA, were characterized by various physicochemical techniques...

Amorphous silica as a food additive (E 551) is used in food materials (e.g., sweeteners, dairy products) for its anti-caking properties. The physicochemical properties of SiO2 also make it suitable to serve as a carrier of active substances in functional foods, dietary supplements, and drugs. Deficiency of niacinamide (vitamin B3, niacin) leads to several pathologies in the nervous system and causes one of the nutritional diseases called pellagra. The present study focuses on the use of hybrid ordered mesoporous silicas (SBA-15/SBA-16) functionalized with amino groups introduced through grafting or co-condensation with (N-vinylbenzyl)aminoethylaminopropyltrimethoxysilane (Z-6032) as novel carriers of niacinamide...

An analysis methodology was optimised and validated for the quantification of opium alkaloids (OAs) in ground poppy seeds. This involved ultrasound-assisted extraction (UAE) and solid-phase extraction (SPE) purification before analysis using a high-performance liquid chromatography mass spectrometry detector (HPLC-MS/MS). UAE was optimised through the design of experiments with three factors and a three-level full factorial design. For SPE optimisation, a commercial material was compared with a previously synthesised material of SBA-15 silica functionalised with sulfonic groups (SBA-15-SO3 - )...

Atrazine and glyphosate are two of the most used pesticides around the world causing serious water contamination. In this study, amine-functionalized Santa Barbara Amorphous-15 silica (SBA-15-NH2 ) was synthesized and employed for the aqueous adsorption of atrazine and glyphosate. The adsorbent was mesoporous post-functionalization with lower surface area, pore volume, size, and stability when compared to the SBA-15. The pesticides adsorption rates were high with over 85% of potential adsorption having occurred within the initial 180 min...

The implementation of supported metal catalysts heavily relies on the synergistic interactions between metal nanoparticles and the material they are dispersed on. It is clear that interfacial perimeter sites have outstanding skills for turning catalytic reactions over, however, high activity and selectivity of the designed interface-induced metal distortion can also obtain catalysts for the most crucial industrial processes as evidenced in this paper. Herein, the beneficial synergy established between designed Pt nanoparticles and MnO in the course of the reverse water gas shift (RWGS) reaction resulted in a Pt/MnO catalyst having ~10 times higher activity compared to the reference Pt/SBA-15 catalyst with >99% CO selectivity...

A variety of methods are employed to synthesize amorphous silica-alumina (ASA) to resolve the role of Al speciation and surface area in the catalytic performance in the Diels-Alder cycloaddition reaction of 2,5-dimethylfuran and ethylene to p -xylene. ASA was prepared by homogeneous deposition-precipitation (HDP) of Al3+ on ordered mesoporous silica, i.e. , SBA-15 and OMS prepared under hydrothermal synthesis conditions using an imidazole-based template, and one-step flame spray pyrolysis (FSP). IR spectroscopy and 27 Al MAS NMR showed that the resulting ASA represented a set of materials with distinct textural and acidic properties...

Mesoporous silica particles (MSPs) have been studied for their potential therapeutic uses in controlling obesity and diabetes. Previous studies have shown that the level of digestion of starch by α-amylase is considerably reduced in the presence of MSPs, and it has been shown to be caused by the adsorption of α-amylase by MSPs. In this study, we tested a hypothesis of enzymatic deactivation and measured the activity of α-amylase together with MSPs (SBA-15) using comparably small CNP-G3 (2-chloro-4-nitrophenyl alpha-d-maltotrioside) as a substrate...

The resource utilization and valorization of waste tires (WT) are of significant importance in reducing environmental pollution. To produce high-value p-cymene from WT, we propose a catalytic cascade process combining hydropyrolysis and catalytic gas-phase hydrotreating in a two-stage fixed-bed reactor. The effect of catalysts prepared with three different acidic supports on the hydrogenation/dehydrogenation of limonene, a compound derived from the hydropyrolysis of WT, was investigated. The p-cymene formation could be controlled by optimizing process parameters, including hydropyrolysis temperature, hydrogenation temperature, and catalyst-to-feedstock ratio (C/F)...

A source of Brønsted acid centers, generated on the surface of two mesoporous silica supports of different structures (SBA-15 and MCF), was 3-(trihydroxysilyl)-1-propanesufonic acid (TPS). The materials obtained were characterized and applied as catalysts for the oxidative desulfurization of dibenzothiophene (DBT) with hydrogen peroxide as a model ODS (oxidative desulfurization) process. The properties of the materials were examined via nitrogen physisorption, XRD (X-ray Diffraction) and elemental analysis showing the preservation of the support structure after modification with organosilane species...

The Low utilization and high cost of platinum counter electrode (CE) in the application of dye-sensitized solar cells has limited its large-scale manufacturing in the industry. Herein, a facile pyrolysis combination of Pt and SBA-15 molecular sieve (MS) formed 1.6-1.9 times higher amount and 2-3 times reduced dimension of Pt distributed within porous structure of SBA-15. The composite CE with 20 % of SBA-15 exhibited an enhanced power conversion efficiency of 9.31 %, exceeding that of absolute Pt CE (7...