Reverse arthroplasty

BACKGROUND: Knee osteoarthritis (KOA) is a common chronic degenerative joint disease. 3D printing technology has become one of the important directions of medical development along with individualized precision treatment in orthopedics. OBJECTIVE: To investigate the effect of 3D printing technology-assisted total knee arthroplasty (TKA) on cartilage in rabbits with KOA. METHODS: A rabbit model of KOA was established and treated by TKA or 3D printing-assisted TKA...

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere...

PURPOSE: Reverse shoulder arthroplasty has demonstrated excellent clinical efficacy for patients with shoulder joint diseases and is increasingly in demand. Traditional surgery faces challenges such as limited exposed surfaces and a narrow field of vision, leading to a shorter prosthesis lifespan and a higher risk of complications. In this study, an optical navigation system was proposed to assist surgeons in real-time tracking of the surgical scene. METHODS: Our optical navigation system was developed using the NDI Polaris Spectra device and several open-source platforms...

BACKGROUND: While forward elevation, abduction, and external rotation are often successfully restored, internal rotation (IR) is frequently not satisfactorily recovered following reverse shoulder arthroplasty (RSA), affecting patients' ability to perform certain daily activities. This study examined the prevalence of limited IR in patients receiving modern RSA and its impact on clinical outcomes and patient satisfaction with their RSA. METHODS: A cross-sectional study was conducted on patients who had undergone primary RSA using a modern RSA prosthesis with a minimum one-year follow-up...

INTRODUCTION: With innovations in transplant medicine and longer life expectancies in solid organ transplant (SOT) recipients, the incidence of shoulder arthroplasty is predictably rising in this population. Reverse shoulder arthroplasty (RSA) has become increasingly popular due to advances in prosthetic design with expanded indications. While previous studies have examined shoulder arthroplasty in SOT patients, information specifically related to RSA patients is largely unexplored. We aim to analyze the demographics and characteristics of SOT patients who have undergone RSA while assessing inpatient complication rates, length of stay (LOS), and hospital costs in these patients compared to a matched cohort of non-transplant patients...

INTRODUCTION: Shoulder arthroplasties have been demonstrated to provide reliable pain relief as well as functional benefits. The advent of the reverse shoulder arthroplasty allowed for expanded indications for shoulder replacement. Several studies comparing the outcomes of anatomic and reverse total shoulder arthroplasties have demonstrated decreased range of motion in the reverse arthroplasty cohort, especially in internal rotation. The authors hypothesized that slight modifications to the humeral component of a reverse shoulder arthroplasty could result in increased impingement free range of motion without significant sacrifices to stability...

Background : Reversed total shoulder arthroplasty (RTSA) is an established surgery for many pathologies of the shoulder and the demand continues to rise with an aging population. Preoperative planning is mandatory to support the surgeon's understanding of the patient's individual anatomy and, therefore, is crucial for the patient's outcome. Methods : In this observational study, we identified 30 patients who underwent RTSA with two- and three-dimensional preoperative planning. Each patient underwent new two-dimensional planning from a medical student and an orthopedic resident as well as through a mid-volume and high-volume shoulder surgeon, which was repeated after a minimum of 4 weeks...

Background: The use of reverse shoulder arthroplasty as a primary and revision implant is increasing. Advances in implant design and preoperative surgical planning allow the management of complex glenoid defects. As the demand for treating severe bone loss increases, custom allograft composites are needed to match the premorbid anatomy. Baseplate composite structural allografts are used in patients with eccentric and centric defects to restore the glenoid joint line. Preserving bone stock is important in younger patients where a revision surgery is expected...

Objective  There are few studies to date reporting on outcomes following reverse total shoulder arthroplasty with cohorts stratified by glenosphere size. The purpose of this study is to investigate the role that glenosphere size has on postoperative outcomes. Methods  Patients who underwent reverse TSA between 1987 with minimum of 2.0 years of follow-up were included. Patients were stratified into two cohorts based on glenosphere size of 36mm or 40mm. Patients' range of motion, patient-reported outcomes, and radiographic variables (glenoid preoperative morphology, scapular notching, humeral loosening) were evaluated...

BACKGROUND: As the number of total shoulder arthroplasty (TSA) procedures increases, there is a growing interest in improving patient outcomes, limiting costs, and optimizing efficiency. One approach has been to transition these surgeries to an outpatient setting. Therefore, the purpose of this study was to conduct an age-stratified analysis comparing the 90-day postoperative outcomes of primary TSA in the same-day discharge (SDD) and inpatient (IP) settings with a specific focus on the super-elderly...

BACKGROUND: Perioperative intravenous (IV) dexamethasone is commonly used in lower extremity total joint arthroplasty to manage postoperative pain and nausea/vomiting, and recent studies have demonstrated that its use may lower rates of acute postoperative medical complications. However, there is limited information regarding the safety and efficacy of IV dexamethasone in patients undergoing total shoulder arthroplasty (TSA). Additionally, there is concern surrounding corticosteroid use prior to surgery as preoperative corticosteroid injections have been associated with adverse outcomes after TSA, including periprosthetic joint infection (PJI) and revision surgery...

INTRODUCTION: Allograft prosthetic composite (APC) reconstruction is performed after resection of proximal humerus tumors or failure of arthroplasty implants. There is limited literature on the postoperative outcomes of this technique. We sought to assess implant survival, failure rates, and postoperative functional outcomes after APC reconstruction of the proximal humerus. METHODS: A systematic review of the PubMed and Embase databases was conducted. The study was registered on PROSPERO (ID: 448663)...

BACKGROUND: In comparison to primary reverse shoulder arthroplasty (RSA) procedures, revision arthroplasty can be a longer and more complex procedure leading to an increased risk of complications. The reported rates of infection in primary RSA range from 1% to 19% and the cost impact on patients and healthcare systems is significant, leading to multiple revision surgeries. The purpose of this study was to evaluate the postoperative outcomes, complications, and revision rates for revision reverse shoulder arthroplasty (rRSA) due to infection compared to rRSA for non-infectious causes...

INTRODUCTION: Proximal humerus fractures (PHFs) are one of the most common fractures among patients aged 65 years and older, commonly due to low-energy mechanisms. It is essential to identify drivers of increased healthcare utilization in geriatric PHF patients and bring awareness to any disparities in care. Here, we identify factors associated with the likelihood of inpatient admission and prolonged hospital stay among patients aged 65 years and older who sustain PHF due to falls. METHODS: A national database was used to identify patients aged 65 years and older who suffered proximal humeral fractures due to a fall...

PURPOSE: The anterior stability of reverse total shoulder arthroplasty is affected by multiple factors. However, the effect of glenosphere inclination on stability has rarely been investigated, which is what this study aims to look into. METHODS: Reverse shoulder arthroplasty was performed on 15 cadaveric human shoulders. The anterior dislocation forces and range of motion in internal rotation in the glenohumeral joint (primary measured parameters) were tested in a shoulder simulator in different arm positions and implant configurations, as well as with a custom-made 10° inferiorly inclined glenosphere...

Background: Despite the importance of the deltoid to shoulder biomechanics, very few studies have quantified the three-dimensional shape, size, or quality of the deltoid muscle, and no studies have correlated these measurements to clinical outcomes after anatomic (aTSA) and/or reverse (rTSA) total shoulder arthroplasty in any statistically/scientifically relevant manner. Methods: Preoperative computer tomography (CT) images from 1057 patients (585 female, 469 male; 799 primary rTSA and 258 primary aTSA) of a single platform shoulder arthroplasty prosthesis (Equinoxe; Exactech, Inc...

BACKGROUND: The design of reverse shoulder arthroplasty (RSA) implants has evolved significantly over the past 50 years. Today there are many options available that differ in design of the glenoid and humeral components, fixation methods, sizes and modularity. With respect to the humeral component the literature has generally focused on the differences between inlay and onlay designs and the potential impact on outcomes. However, inlay and onlay design represents only one factor of many...

Reverse total shoulder arthroplasty (rTSA) has been demonstrated to be an effective intervention for various shoulder disorders. The number of rTSA-related studies performed has increased annually over the past three decades. The Journal of Shoulder and Elbow Surgery had the highest number of publications and citations in the rTSA-related research domain and is therefore considered to be the most influential journal in this field. The USA published the most publications and established a high degree of cooperation with many countries worldwide...

INTRODUCTION: Revision shoulder arthroplasty can be challenging. One of the main considerations for surgeons is the type of implant that was placed in the initial surgery. Anatomic shoulder arthroplasty (ASA) is used for cases of osteoarthritis as well as for fractures of the humeral head. Hemiarthroplasty can be used for complex proximal humerus fractures. The purpose of this study is to determine whether there is a difference in clinical and radiographic outcomes between patients that failed primary fracture hemiarthroplasty (FHA), or ASA for osteoarthritis and then required reoperation with a conversion to reverse shoulder arthroplasty (RSA)...

AIMS: To establish cut-off values for Patient-Acceptable Symptom States (PASS) in three Patient Reported Outcome Measures (PROMs), the Constant-Murley Score (CMS) and University of California Los Angeles (UCLA) Shoulder Score and Oxford Shoulder Score (OSS) at 3, 6, and 12-months following reverse shoulder arthroplasty (RSA). METHODS: A retrospective study was conducted for individuals who were treated for massive rotator cuff tear, rotator cuff arthropathy or proximal humerus fractures with RSA from January 2011 and February 2020...