composite, microleakage

INTRODUCTION: The application of different cavity disinfectants is an essential step that eliminates bacteria after cavity preparation. However, some of these materials may affect restoration sealing ability. AIM: This study aimed to assess the degree of microleakage at the tooth restoration interface after using different nano prepared cavity disinfectants versus Diode Laser. MATERIALS AND METHODS: Three disinfectants were prepared on the nanoscale; Propolis, Liquorice and Chlorhexidine...

OBJECTIVE: This study aims to synthesize novel chitosan nanoparticles loaded with an amelogenin-derived peptide QP5 (TMC-QP5/NPs), investigate their remineralization capability and inhibitory effects on endogenous matrix metalloproteinases (MMPs), and evaluate the dentin bonding properties of remineralized dentin regulated by TMC-QP5/NPs. METHODS: TMC-QP5/NPs were prepared by ionic crosslinking method and characterized by dynamic light scattering method, scanning electron microscopy, transmission electron microscope, atomic force microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry...

PURPOSE: The aim of this study is to evaluate the amount of microleakage resulting from the application of self-etch, selective etch, etch-and-rinse of adhesive systems in class II cavities. MATERIALS AND METHODS: Four adhesive systems with etch-and-rinse, selective etch and self etch methods were used on the extracted teeth. All groups were restored with G-aenial A'CHORD (Nanohybrid) (GC, Tokyo, Japan) A2 composite. After 1000 thermal cycles were applied to the teeth after restoration, the samples were kept in 0...

Recurrent caries remain a persistent concern, often linked to microleakage and a lack of bioactivity in contemporary dental composites. Our study aims to address this issue by developing a low-shrinkage-stress nanocomposite with antibiofilm and remineralization capabilities, thus countering the progression of recurrent caries. In the present study, we formulated low-shrinkage-stress nanocomposites by combining triethylene glycol divinylbenzyl ether and urethane dimethacrylate, incorporating dimethylaminododecyl methacrylate (DMADDM), along with nanoparticles of calcium fluoride (nCaF2 ) and nanoparticles of amorphous calcium phosphate (NACP)...

INTRODUCTION: Several advantages, including improved aesthetics and conservative cavity preparation, made resin-based composite (RBC) a popular restorative material. However, several limitations come with RBC restorations such as the necessity for proper isolation of the tooth and an incremental layering for the material due to the limitations of the depth of cure. Despite these advantages and limitations, the usage of these restorative materials is increasingly being expanded due to the advancement made since their introduction...

Objective: To compare the depth of cure, surface hardness and microleakage applied to primary teeth of three types of bulk-fill resins, so as to provide reference for clinical application. Methods: Composite resin FiltekTM Z350 XT (group A) and giomer Beautifil Ⅱ (group B) were used as controls, high-viscosity bulk-fill resin FiltekTM Bulk Fill (group C), sonic-activated bulk-fill resin SonicFill 2 (group D) and flowable bulk-fill resin SDR® flow+(group E) were studied. The microstructure of each group was observed by scanning electron microscope (SEM)...

The aim was to evaluate the effects of adding different functional monomers to experimental self-adhesive composites on polymerization kinetics, cell metabolic activity, and sealing ability. Self-adhesive composites were formulated using urethane dimethacrylate (UDMA) as the base monomer and triethylene glycol dimethacrylate (TEGDMA). Additionally, 10 wt.% of distinct functional monomers were added - 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP), glycerol phosphate dimethacrylate (GPDM), 2-hydroxyethyl methacrylate (HEMA) or hydroxyethyl acrylamide (HEAA)...

BACKGROUND: The sealing ability of different liners under composite restorations in the reduction of microleakage. AIM: To evaluate the effects of three different liners in sandwich techniques on gingival microleakage of class II composite restorations. MATERIALS AND METHODS: Standardized Class II box cavities were prepared on forty premolar teeth and randomly divided into four groups, n = 10: Group A, no liner (control); Group B, Polofil NHT Flow; Group C, Ionolux; and Group D, Fuji VII...

Dental caries is a dynamic disease induced by the unbalance between demineralization of dental hard tissues caused by biofilm and remineralization of them; however, although various effective remineralization methods have been well documented, it is a challenge to reestablish the balance by enhancing remineralization alone while ignoring the antibacterial therapy. Therefore, the integration of remineralizing and antibacterial technologies offers a promising strategy to halt natural caries progression in clinical practice...

STATEMENT OF PROBLEM: Research is lacking on the restoration of structurally compromised posterior teeth using direct composite resin or indirect restorations. PURPOSE: The purpose of this in vitro study was to measure the fracture resistance and microleakage of different onlay restorations fabricated by using conventional and digital computer-aided design and computer-aided manufacturing (CAD-CAM) to restore structurally compromised teeth. MATERIAL AND METHODS: Mandibular molars (n=54) were prepared for onlay restorations...

BACKGROUND: Orthodontic treatment is associated with numerous adverse side effects, such as enamel discoloration, demineralization or even caries. The presence of microleakage between the enamel and the adhesive and between the adhesive and the base of the orthodontic bracket allows penetration of the bacteria, molecules, and liquids into the enamel and can lead to unpleasant "white spot lesions" or secondary caries beneath and around the brackets. The aim of this in vitro study was to evaluate microleakage in five adhesive systems commonly used in orthodontic practice for bonding brackets...

In recent years, dental resin materials have become increasingly popular for cavity filling. However, these materials can shrink during polymerization, leading to microleakages that enable bacteria to erode tooth tissue and cause secondary caries. As a result, there is great clinical demand for the development of antibacterial resins. The principle of antibacterial resin includes contact killing and filler-release killing of bacteria. For contact killing, quaternary ammonium salts (QACs) and antibacterial peptides (AMPs) can be added...

AIM: The present research was conducted to assess the microleakage of stainless steel crowns along with pedo jacket crowns following cementation with different luting cements. MATERIALS AND METHODS: A total of 60 deciduous teeth subjected to extraction were employed in this in vitro research. These 60 specimens were randomly divided into two groups: Group I: Stainless steel crowns and Group II: Pedo Jacket crowns. Both crowns were subjected to cementation using self-cure resin-modified glass ionomer (RMGI) cement as well as by means of self-adhesive universal resin cement (RelyX luting cement)...

INTRODUCTION: Although the combined use of chemical and electrochemical decontamination protocols can completely remove contaminants from the surfaces of one-time used healing abutments (HAs), their effectiveness in multiple-used HAs remains unknown. We aimed to investigate the effect of reused HAs frequency on the implant-HA contact surface area, micro-gap, microleakage, and surface topography following chemical and combined chemical and electrochemical decontamination protocols. METHODS: Ninety bone level titanium implants were assembled with 90 bone level HAs, in which 80 contaminated HA samples were collected from human participants...

INTRODUCTION: Currently, there is little clinical evidence to support the medium- and long-term survival and clinical performance of ultraconservative approaches using adhesive restorations in full-mouth restorations. The aim of this case series study was to evaluate the medium-term clinical performance of anterior and posterior adhesive restorations applied with direct and indirect techniques using resin composites and glass-ceramic-based materials. MATERIALS AND METHODS: The inclusion criteria were an esthetic problem as the main reason for consultation and severe generalized wear of grade 2 to 4 according to the Tooth Wear Evaluation System (TWES 2...

Optimal bonding of adhesive restorations to dentin is crucial to prevent microleakage and enhance the survival of root-filled teeth. The aim of this study was to investigate the effect of chlorhexidine (CHX), alexidine (ALX) and octenidine dihydrochloride (OCT) on the bond strength of resin composites to coronal dentin. Human coronal dentin specimens were treated with 2% CHX, 0.1% ALX, 0.1% OCT or saline then restored with traditional or bulk-fill resin composites. The adhesion strength between the resin and dentin was measured using the microtensile bond strength and failure mode was determined using a stereomicroscope...

Introduction: Despite the advanced formulations of resin composites, microleakage is still among the commonest causes of clinical failure of these restorations. We evaluated the effect of surface coating and laser pretreatment on the microleakage of Class V resin composite restorations in primary teeth. Methods: Sixty extracted primary molar teeth having intact lingual or facial surfaces were randomly allocated into the control, G-Coat Plus surface coating, and erbium-doped yttrium aluminum garnet (Er:YAG) laser pretreatment groups...

OBJECTIVES: Current dental resins exhibit polymerization shrinkage causing microleakage, which has the potential to cause recurrent caries. Our objectives were to create and characterize low-shrinkage-stress (LSS) composites with dimethylaminododecyl methacrylate (DMADDM) as an antibacterial agent to combat recurrent caries. METHODS: Triethylene glycol divinylbenzyl ether and urethane dimethacrylate were used to reduce shrinkage stress. DMADDM was incorporated at different mass fractions (0%, 1...

BACKGROUND: Bleaching is a highly common method used nowadays to treat tooth discolouration because it is a significant cosmetic issue, particularly with anterior teeth, however bleaching itself results in microleakage. OBJECTIVE: This study aims to evaluate the impact of in-office bleaching on class V restoration microleakage with type 1 and type 2 composite restorations. METHODS: Three hundred and twenty healthy, caries-free removed human anterior teeth were used in this in-vitro study...

Bioactive materials have emerged as a promising alternative to conventional restorative materials as part of more conservative dentistry. The aim of this study was to evaluate and compare the shear bond strength (SBS) and microleakage of a new bioactive restorative material, two bulk-fill restorative composites, and a conventional composite at 24 h, 4 weeks, and 8 weeks. Three hundred and sixty molars and premolars were divided into four groups: ACTIVA™ BioACTIVE Restorative™, Filtek™ Bulk-Fill Restorative Composite, Tetric® N-Ceram Bulk-Fill Composite, and G-aenial® Composite...