Dental Press Journal of Orthodontics

OBJECTIVE: This study evaluated the accuracy and precision of digital models acquisition using a home-built, low-cost scanning system based on the structured light method. METHODS: a plaster model (PM) was scanned using the experimental device (SL) and a dental desktop scanner (DS). The teeth dimensions of PM and SL models were measured in triplicate, with a caliper and digitally, respectively. The agreement of the measurements of each model was evaluated using the intraclass correlation coefficient, and the validity between the different measurement techniques was assessed using the Bland-Altman analysis...

OBJECTIVE: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. MATERIAL AND METHODS: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner...

OBJECTIVE: The objective of the present prospective case control study was to evaluate the facial pleasantness of patients with complete and unilateral cleft lip and palate at the end of interdisciplinary rehabilitation, submitted to facial fillers based on hyaluronic acid. METHODS: The study group consisted of 18 individuals with complete unilateral cleft lip and palate, aged between 18 and 40 years (mean age 29 years) of both sexes. The patients presented a concave profile with mild to moderate maxillary deficiency, with completed orthodontic treatment and conducted by means of dentoalveolar compensations without orthognathic surgery...

OBJECTIVE: This study aimed to evaluate occlusion development after premature loss or extraction of deciduous anterior teeth, by means of a prospective cohort study. METHODS: Fifteen infants and children aged 1 to 5 years old were longitudinally assessed (with loss or extraction of deciduous anterior teeth [n = 9], and without tooth losses [n = 6]). Photographs and dental casts at the baseline and after 24 months of follow-up were performed. Dental casts were scanned, and linear measurements were made on the digitalized models (missing tooth space, arch perimeter, arch length, arch width, intercanine length and intercanine width)...

INTRODUCTION: Surgically assisted rapid palatal expansion (SARPE) has been the treatment of choice in subjects presenting skeletally mature sutures. OBJECTIVE: The purpose of this study was to analyze stress distribution and displacement of the craniofacial and dentoalveolar structures resulting from three types of palatal expanders with surgical assistance using a non-linear finite element analysis. MATERIAL AND METHODS: Three different palatal expanders were designed: Model-I (tooth-bone-borne type containing four miniscrews), Model-II (tooth-bone-borne type containing two miniscrews), and Model-III (bone-borne type containing four miniscrews)...

OBJECTIVE: The aim of the present study was to assess the impact of orthodontic retainers on oral health-related quality of life (OHRQoL) in the short and long terms after orthodontic treatment. METHODS: Data from 45 patients up to three years after orthodontic treatment (T0) were analyzed. Patients were reassessed four years (T1) after T0. OHRQoL was measured using the OHIP-14 (Oral Health Impact Profile-14) questionnaire. The presence of a fixed retainer in the upper and/or lower arches, sex, and age were the predictive variables evaluated at T0 and T1...

INTRODUCTION: The use of clear aligners as an alternative to fixed orthodontic appliances has become popular due to the aesthetic demands of adult patients seeking orthodontic treatment. However, orthodontists' lack of knowledge about the legal consequences of their activities, and the lack of solid scientific evidence raise concerns regarding civil liability in this type of treatment. Marketing campaigns of manufacturing companies often exaggerate promises of results, and ignore the lack of scientific evidence...

OBJECTIVE: The aim of this study was to evaluate the extent to which orthodontic treatment need is perceived by the patients and by the orthodontist, as well as the possible impacts on the OHRQoL (Oral Health-Related Quality of Life) over the course of conventional orthodontic treatment in adolescent patients. METHODS: The sample consisted of 55 adolescents. The perception of patients and orthodontists relative to the malocclusion was evaluated by the IOTN (Index of Orthodontic Treatment Need)...

OBJECTIVE: To compare alignment efficiency and root resorption between nickel-titanium (NiTi) and copper-nickel-titanium (CuNiTi) archwires after complete alignment in mandibular anterior region. METHODS: In this two-arm parallel single-blind randomized controlled trial, forty-four patients with Class I malocclusion with mandibular anterior crowding were recruited form orthodontic clinic of All India Institute of Medical Sciences (Jodhpur, India). Patients were randomly allocated into NiTi and CuNiTi groups, with a 1:1 allocation...

OBJECTIVE: This randomized crossover trial evaluated periodontal indexes of two types of 3 x 3 retainers (a modified 0.032-in SS V-loop retainer and a conventional 0.0215-in SS coaxial wire retainer) after bonded for six months. Also, bonded failure rate, and a questionnaire about comfort, ease of cleaning and overall preference were recorded. MATERIAL AND METHODS: 15 patients were enrolled in this study who used both retainers for six months each, having a 15-day wash-out interval between each bonded retainer usage...

INTRODUCTION: Bisphosphonates have an inhibitory impact on osteoclastic activity, reducing bone resorption. However, the influence of risedronate on tooth movement is not well-defined. OBJECTIVE: This systematic review assessed the effect of risedronate intake on orthodontic tooth movement. A case report was also provided. METHODS: Two independent reviewers searched six databases (PubMed, Web of Science, Ovid, Lilacs, Scopus, and Open Grey)...

OBJECTIVE: To assess the in-vitro effect of single applications of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets. MATERIAL AND METHODS: Tooth/bracket sets (n=65) were immersed in artificial saliva (1h at 37ºC) and randomly subjected to single applications (100µL; 1min) of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP emulsion), CPP-ACP with fluoride (CPP-ACPF emulsion), solutions of titanium tetrafluoride (TiF4) or sodium fluoride (NaF), or no treatment (CG)...

INTRODUCTION: The benefits and safety of using orthodontic aligners have been reported more by clinical experience and expert opinion than by scientific evidence. Another important aspect is that aligners are constantly evolving. It is important to obtain evidence that allows for new updates in manufacturing technology, in the development of new movement planning protocols, in the incorporation and design of attachments, and in the aid of skeletal anchorage. METHODS: Evidence retrieved from six electronic databases (CINAHL, MEDLINE, EMBASE, Psych Info, the Cochrane Library and the Joanna Briggs Library) is presented by means of questions and answers...

OBJECTIVE: The objective of this study was to determine how arch form and interproximal contact size displace mandibular teeth subjected to an anterior component of force (ACF). METHODS: Nine finite element models (FEM) of the mandibular arch were developed using Ansys® v. 16.0 software. They were designed to evaluate the effects of three arch forms (triangular, oval, and square) and three contact sizes (point-to-point, 1 mm diameter, and 2 mm diameter). All nine models were subjected to an ACF of 53...

OBJECTIVE: The purpose of this prospective clinical trial was to explore the dental and soft tissue changes accompanying the use of skeletally anchored nickel-titanium (NiTi) extrusion arch in the correction of anterior open bite (AOB). MATERIAL AND METHODS: Twenty female patients with a mean age of 16.5 ± 1.5 years and a mean dentoalveolar AOB of 2.38±0.7 mm participated in this study. All patients were treated with an maxillary 0.017×0.025-in NiTi extrusion arch, with the aid of miniscrews inserted between the maxillary second premolars and first molars bilaterally, to act as indirect anchorage...

INTRODUCTION: Although uncommon in dentistry, the concept of the life cycle holds great importance for dental professionals in identifying crucial intervention opportunities and determining the optimal timing for treatments and procedures. OBJECTIVE: To carry out a review of the literature on life cycle classifications and their distinct phases, evaluating their applicability in healthcare. METHODS: A literature review was performed, searching for articles in PubMed, SciELO, National Health Library (BvB), and Google Scholar databases, as well as relevant books...

OBJECTIVE: To compare the body mass index (BMI) and the weight loss (WL) in patients with dentofacial deformities who underwent monomaxillary versus bimaxillary orthognathic surgery. MATERIALS AND METHODS: This prospective longitudinal study included 69 patients with dentofacial deformities who underwent surgical orthodontic treatment. Patients were divided into two groups according to the type of orthognathic surgery: monomaxillary or bimaxillary. A preoperative nutritional assessment based on BMI was performed; the percentage of involuntary WL between the preoperative and postoperative periods was also calculated...

OBJECTIVE: The present study was conducted to investigate the effects of leukocyte-platelet-rich fibrin (L-PRF) on the rate of maxillary canine retraction for a period of 5 months. METHODS: A split-mouth study was conducted on 16 subjects (9 males and 7 females; age range 17-25 years; mean age, 21.85±2.45 years) who required therapeutic extraction of bilateral maxillary first premolars. After the initial leveling and alignment, L-PRF plugs were placed in a randomly selected extraction socket (Experimental Group), and the other side served as a control (Control Group)...

INTRODUCTION: With the abundant use of the internet, patients undergoing or interested in orthodontic treatment try to use it to obtain information on pain during treatment. However, YouTube™ is unregulated and may potentially contain inaccurate information. OBJECTIVES: Thus, this study aimed to evaluate the scientific quality of the videos on YouTube™ related to orthodontic pain management. METHODS: A total of 62 videos related to orthodontic pain management were included in the study...

OBJECTIVE: This study compared mandibular growth in children, aged 7 to 12 years, with Class II malocclusion and normal occlusion, between the following stages of cervical vertebrae maturation: initiation (I), acceleration (A), transition (T). MATERIAL AND METHODS: A total of 148 lateral cephalograms (78 males, 70 females) of Class II malocclusion patients, and 60 lateral cephalograms (30 males, 30 females) of normal occlusion patients were included. The following linear cephalometric measurements were performed: Co-Gn (effective mandibular length), Co-Go (ramus height), and Go-Gn (length of mandibular body)...