Analytical Methods : Advancing Methods and Applications

2,6-Pyridinedicarboxylic acid (DPA) is a significant biomarker of anthrax, which is a deadly infectious disease for human beings. However, the development of a convenient anthrax detection method is still a challenge. Herein, we report a novel europium metal-organic framework (Eu-MOF) with an enhanced peroxidase-like activity and fluorescence property for DPA detection. The Eu-MOF was one-step synthesized using Eu3+ ions and 2-methylimidazole. In the presence of DPA, the intrinsic fluorescence of Eu3+ ions is sensitized, the fluorescence intensity linearly increases with an increase in DPA concentration, and the fluorescence color changes from blue to purple...

The highly infectious characteristics of coronavirus disease 2019 (COVID-19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), highlight the necessity of sensitive and rapid nucleocapsid (N) protein-based antigen testing for early triage and epidemic management. In this study, a colorimetric and photothermal dual-mode lateral flow immunoassay (LFIA) platform for the rapid and sensitive detection of the SARS-CoV-2 N protein was developed based on gold nanorods (GNRs), which possessed tunable local surface plasma resonance (LSPR) absorption peaks from UV-visible to near-infrared (NIR)...

The demand for monitoring anthropogenic U isotopes, 236 U and 233 U, in seawater will continue to increase due to radioecological issues and the need for tools for environmental dynamics research. In response to this growing demand, herein, a novel and simple method was developed for the collection of U isotopes in seawater, both in the laboratory and field, using a fabric-like amidoxime adsorbent. The results from the adsorption studies showed that the optimum conditions for processing seawater in a glass beaker were as follows: seawater pH 4, amidoxime adsorbent 0...

Sialic acids are a family of monosaccharides that share a nine-carbon backbone and a carboxyl group. A recent derivatization method based on 3-nitrophenylhydrazine (3-NPH) provides a mild chemical labeling technique for biomolecules containing carbonyl or carboxyl groups. In this study, we utilized 3-NPH to label sialic acids via a two-step derivatization process. The derivatized species can produce a common reporter ion corresponding to C1-C3 with two labels, and a fragment differentiating between Neu5Ac, Neu5Gc, and KDN...

Excessive dietary polyamines (PAs), including putrescine (PUT), spermine (SPM), and spermidine (SPD), have become a worldwide concern due to their carcinogenicity and reduced shelf life. A modern miniaturized on-chip electromembrane extraction (EME) has been applied to extract these compounds from chicken breast samples. This method is based fundamentally on ionic compounds' electrostatic attraction, diffusion, and solubility in the acceptor phase. The chemical structure of polyamines enables their efficient extraction using an electric driving force on a microchip device...

The affinity sites of cadmium (Cd(II)) when binding to cysteine (Cys) and glutathione (GSH) were studied via thermodynamics and nuclear magnetic resonance (NMR) spectroscopy methods. The results showed that the Cd(II) binding sites of Cys and GSH were -SH (exothermic), -NH2 (endothermic) and -COOH (endothermic). The thermodynamic behaviour of Cd(II) binding to Cys/GSH in boric acid and HEPES buffers differed, with the former being mainly endothermic and the latter mainly exothermic. It could be inferred that, in the boric acid system, the main binding site of Cd(II) with Cys and GSH is changed from -SH in HEPES to -COOH and -NH2 in boric acid...

Correction for 'An impedimetric sensor based on molecularly imprinted nanoparticles for the determination of trypsin in artificial matrices - towards point-of-care diagnostics' by Sabrina Di Masi et al., Anal. Methods , 2024, 16 , 742-750, https://doi.org/10.1039/D3AY01762A.

In this research, for the first time, we introduce a vapor-monitoring headspace strategy to establish a new methodology for determining the water absorbability of cellulose-derived materials. The method involves detecting the water in the gas phase from various cellulose-derived materials after achieving the equilibrium state. By utilizing the headspace technique to monitor the change in water vapor pressure from bound water to free water, a change point indicating the water absorbability can be identified through fitting procedures...

This review summarizes recent developments in amperometric biosensors, based on one-step electrodeposited organic-inorganic hybrid layers, used for analysis of low molecular weight compounds. The factors affecting self-assembly of one-step electrodeposited films, methods for verifying their composition, advantages, limitations and approaches affecting the electroanalytical performance of amperometric biosensors based on organic-inorganic hybrid layers were systemized. Moreover, issues related to the formation of one-step organic-inorganic hybrid functional layers with different structures in biosensors produced under the same electrodeposition parameters are discussed...

A novel luminescence-based analytical methodology was established employing a europium(III) complex with 3-allyl-2-hydroxybenzohydrazide (HAZ) as the coordinating ligand for the quantification of gemifloxacin mesylate (GMF) in pharmaceutical preparations and human plasma samples spiked with the compound. The stoichiometry of the europium complex with HAZ was determined via the Job plot and exhibited a metal-to-ligand ratio of 1 : 2. The analytical procedure relies on a rapid and significant enhancement of luminescence by the Eu(AZ)2 complex when it interacts with gemifloxacin mesylate, which allowed for the rapid detection of 96 samples within approximately 2 minutes...

Dithiocarbamate fungicides (DTCs) have been widely used all over the world. Some of them show toxicities, such as growth toxicity and teratogenicity. Therefore, the analysis of DTCs in environments or crops is very significant. However, their direct and individual analysis was difficult, because most of them are metal complex compounds and have macromolecular properties and a low solubility in water or organic solvents. In the conventional analytical methods for DTCs, the total amount of DTCs was obtained by the quantification of the derivatives of the ligand or by measuring the carbon disulfide formed by the decomposition of the fungicides...

An elevated level of homocysteine (Hcy) in serum is closely related to the development of various diseases. Therefore, homocysteine has been widely employed as a biomarker in medical diagnosis and the on-site detection of homocysteine is highly desired. In this study, a truncated highly specific aptamer for homocysteine was screened and used to design a lateral flow strip (LFS) for the detection of homocysteine. The aptamer was derived from a previously reported sequence. Based on the result of molecular docking, the original sequence was subjected to truncation, resulting in a reduction of the length from 66 nt to 55 nt...

The detection of liquid electrical conductivity has board applications in food safety testing, water quality monitoring, and agricultural soil analysis. Electrodes used in traditional liquid electrical conductivity detection come into direct contact with liquid, leading to electrode contamination and affecting the accuracy of the detection results. The capacitively coupled contactless conductivity detection (C4 D) method effectively addresses this issue. However, impurity particles present in the solution can compromise the consistency and repeatability of detection results...

The development of paper-based devices has drawn a significant amount of attention, ranging from the creation of paper electronics to microfluidic devices. The flow of fluids through the paper substrate can be controlled by establishing a variety of barriers, which can be accomplished by either cutting or producing layers that are hydrophobic. Through the utilisation of this feature, a number of investigations, including mixing, modifying, and analytical studies, have been carried out on the paper substrate...

Facile electro-activated glassy carbon electrodes (e-GCEs), which are prepared in electrolyte solution with a certain potential for a few seconds, have been verified to improve analytical performance toward not a few electro-active molecules recently. Nevertheless, how and why the potential plays an important role is not clear, and has even not received enough consideration. In this paper, we found that the mode and the range of applied potential significantly impacted the sensitivity of methyl parathion (MP), which is a typical pesticide with the electro-active group of -NO2 ...

Sweet tea is a functional herbal tea with anti-inflammatory, anti-diabetic, and other effects, in which phloridzin and trilobatin are two functional compounds. However, the current methods for their quantification are time-consuming, costly, and environmentally unfriendly. In this paper, we propose a rapid method that integrates online pressurized liquid extraction and high-performance liquid chromatography featuring a superficially porous column for fast separation. Moreover, we employ an equal absorption wavelength method to eliminate using multiple standard solutions and relative calibration factors...

Solid phase extraction (SPE) and liquid chromatographic (LC) separation of nucleobases and nucleosides are challenging due to the high hydrophilicity of these compounds. Herein we report a novel on-line SPE-LC-MS/MS method for their quantification after pre-column derivatization with chloroacetaldehyde (CAA). The method proposed is selective and sensitive with limits of detection at the nano-molar level. Analysis of urine and saliva samples by using this method is demonstrated. Adenine, guanine, cytosine, adenosine, guanosine, and cytidine were found in the range from 0...

This work describes an electrochemical sensor for the fast noninvasive detection of uric acid (UA) in saliva. The sensing material was based on a cobalt-containing Prussian blue analogue (Na2- x Co[Fe(CN)6 ]1- y , PCF). By optimizing the ratio of Co and Fe as 1.5 : 1 in PCF (PCF1.5,0 ), particles with a regular nanocubic morphology were formed. The calcination of PCF1.5,0 produced a carbon-coated CoFe alloy (CCF1.5 ), which possessed abundant defects and achieved an excellent electrochemical performance...

A novel fluorescence sensor based on a porphyrinic zirconium-based metal-organic framework, L-cysteine-modified PCN-222 (L-Cys/PCN-222), was developed to selectively recognize histidine enantiomers and sensitively detect Hg2+ . The dual-functional sensor was successfully prepared via the solvent-assisted ligand incorporation method and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), 1 H nuclear magnetic resonance (1 H NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, circular dichroism (CD), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption analyses...

This study presents a novel approach for the detection of carbofuran (CBF) insecticide by systematically exploring a calix[4]arene-derived fluorescence probe, CouC4S, functionalized with two coumarin-labelled cystamine linkages at the narrow edge of the calix[4]arene platform. The proposed method showed a fluorescence "signal - off" effect when CBF binds with CouC4S by quenching the fluorescence intensity of CouC4S. Its limit of detection was as low as 5.55 μM according to the emission study. The working concentration range for this ligand was observed to be up to 5-65 μM...