International Orthodontics

OBJECTIVE: The main objective of this review was to evaluate the effects of orthodontic intrusion on patients with reduced periodontium. Additionally, this review aims to explore the potential for attachment gain and tissue regeneration in these patients and identify optimal therapeutic conditions to mitigate any negative effects of intrusion. METHODS: A systematic review was conducted according to the PRISMA 2020 statement. Duplicate electronic searches of the PubMed, Cochrane, EMC Premium, and Science Direct databases were performed by two independent reviewers...

This case report describes a 19-year-old man presented with a 5.7-mm deep overbite, Class II division 2 malocclusion with the right upper maxillary canine completely buccal ectopia, deviated midline in the upper arch, severe crowding and retroclination of the maxillary and mandibular incisors. The patient was treated with clear aligners to correct the Class II relationship and the deep overbite. A series of clear aligners were used to move bilateral maxillary molars distally with unilateral mini-screw anchorage...

PURPOSE: This study aimed to evaluate the influence of different manufacturing procedures (Eli annealed - hot work versus cold worked - cold work) of the raw material under mechanical properties and morphological characteristics of orthodontic miniscrews (MS). MATERIAL AND METHODS: Thirty MS were randomly separated into 3 types (n=10) according to manufacturer and manufacturing process of the raw material: type A - SIN® annealed (control group); type B - Dentfix® annealed; and, type C - Dentfix® cold worked...

OBJECTIVE: Fixed appliances used in orthodontic treatment are accompanied by some drawbacks, including the development of white spots or enamel demineralization in the vicinity of the brackets and bonding failures. This study aims to evaluate the effect of combining different wt.% of Emodin nanoparticles (ENPs) with orthodontic adhesives to attain adhesives with improved antimicrobial and mechanical properties. METHODS: ENPs were synthesized and added to orthodontic composite at different concentrations (0...

INTRODUCTION: Mesiodistal angulation of premolars and molars can be altered by forces of open bite malocclusion. The aim of this study was to compare the mesiodistal angulations of the posterior teeth in class I, II, and III individuals with anterior open bite (AOB) versus individuals with harmonious occlusion. METHODS: This comparative cross-sectional study used 299 lateral head radiographs of individuals with permanent dentition. There were 4 groups (harmonious occlusion [n=89], Class I open bite [OB] [n=75], Class II OB [n=66], and Class III OB [n=69])...

OBJECTIVE: The modified clear twin-block aligner (CTBA) was developed to provide a mandibular advancement appliance for the treatment of mandibular retrognathia. The objective of this study was to analyse the stress distribution changes of CTBA with 45°, 60° and 70° bite blocks. MATERIAL AND METHODS: A three-dimensional model of the craniomaxillofacial bones and teeth was generated from a spiral computed tomography (CT) scan. The models of the articular disc, capsule, periodontal ligament and CTBA were constructed mathematically...

INTRODUCTION: The aim was to design a meta-analysis evaluating the positron emission tomography (PET) uptake and cerebrospinal fluid (CSF), circulating levels of amyloid-β (Aβ), and tau proteins OSA group versus control group, as well as the association of these biomarkers with the severity of OSA. MATERIAL AND METHODS: Four databases were searched until April 17, 2023, without any restrictions. The effect sizes were the standardized mean difference (SMD) along with a 95% confidence interval (CI)...

This article describes a class II subdivision malocclusion successfully treated by an invisible lingual appliance. The combination of en-masse distalization by interradicular palatal mini-screws and inner unilateral class II auxiliaries, first by intermaxillary elastic, later by a class II coil spring, resulted in a dento-alveolar correction, allowing one to maintain the appliance completely invisible. At the same time, the inclination of buccal sectors was normalized by a correct torque expression with set-up overcorrections, resulting in a significant improvement of the buccal corridors...

AIM: We conducted this review to evaluate the safety and efficacy of antimicrobial photodynamic therapy (aPDT) for the management of gingivitis and white spot lesions (WSLs) in fixed orthodontic patients. METHODS: The PubMed/MEDLINE, Cochrane Library, Scopus, and Google Scholar databases were searched for randomized controlled trials and clinical trials assessing the clinical effectiveness of aPDT for the management of gingivitis and WSLs in fixed orthodontic patients without time limitation...

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III...

BACKGROUND: Temporarily installed titanium orthodontic miniscrews are usually used for many orthodontic applications, especially those cases that need high force, such as skeletally anchored orthodontic appliance cases. Surface modification of titanium miniscrews has proved success in preventing failure and overcoming their limitations. OBJECTIVE: The present study aims at the assessment of the quality of osseointegration of surface modified titanium miniscrews installed in the maxilla of albino rabbits with cone-beam computed tomography (CBCT) imaging as well as histomorphometric investigations...

PURPOSE: The objective of this study was to compare the shear bond strengths of orthodontic brackets bonded to translucent dental zirconia samples which are anatomically accurate and treated with various surface treatments. METHODS: This in vitro study included 156 samples from 3 brands of high-translucent zirconia split into a control group and 4 surface treatment groups: 9.6% hydrofluoric acid etching, 50-micron aluminium oxide particle air abrasion, and 30-micron tribochemical silica coating (TBS) particle air abrasion with and without silane application...

The benefits of lingual orthodontics go beyond appearance. In this case study, a 30-year-old female patient was treated with a custom lingual orthodontic appliance for a Class II high-angle malocclusion, anterior open bite, incisor biprotrusion and crossbite, unilateral second molar scissor bite and dysfunctional tongue thrust. To achieve a counterclockwise rotation of the mandible, implant anchorage was used to control the vertical height. To complete the compensatory therapy, four first premolars were removed...

The eruptive deviation of the permanent maxillary canine must be identified early, at the beginning of the second transitional period of the mixed dentition. Acting at this moment is fundamental for its spontaneous redirection and eruption. The aim of the paper is to present a case where the extraction of the deciduous canines was the choice for redirecting the maxillary permanent canines with eruptive palatal deviation, as well as to suggest a sequence of procedures for diagnosis and choice of treatment. The success of deciduous canine extraction in redirecting the ectopic permanent canines is discussed in this case, as well as aspects that might lead to failure...

OBJECTIVE: The primary objective of this study was to investigate the biomechanical effects and stresses on bone, PDL, cementum and displacement along X-,Y- and Z-axis during true intrusion of molars using mini-implants with finite element analysis; the secondary objective of the study was to find out the best method for posterior intrusion in clinical practice. MATERIAL AND METHODS: A 3D finite element method was used to simulate true molar intrusion using sliding mechanics...

OBJECTIVE: To compare the effectiveness of the clear aligners with the traditional fixed appliances in the treatment of premolars extraction complex cases using the American Board of Orthodontics Objective Grading System (ABO-OGS). MATERIAL AND METHODS: A single-centre, 2-parallel groups RCT with two arms. Forty severe crowding patients (14 males, 26 females; mean age: 21.40±2.42) who required four first premolars extraction were included and randomly allocated into two treatment groups: clear aligners therapy group (CAT), and fixed appliances therapy group (FAT)...

OBJECTIVE: This systematic review and meta-analysis aimed to assess the effect of premature loss of primary teeth in children of mixed dentition age on the prevalence of malocclusion in permanent dentition. MATERIAL AND METHODS: A search was conducted in Medline through PubMed, Cochrane databases, Google Scholar, and Directory of Open Access Journals (DOAJ) through March 2023. All observational studies that evaluated the association between premature loss of primary teeth and malocclusion in permanent dentition were included for analysis...

BACKGROUND: Various designs of mini-implants assisted rapid palatal expander (MARPE) appliances can impact treatment effectiveness through their biomechanical effects. The purpose of the study was to study the stress distribution and displacement with four different designs of the MARPE appliance on the craniofacial complex. METHODS: A 3D finite element model of the craniofacial complex was created from CBCT DICOM data, comprising four distinct groups. Each group consisted of one 4-hole expansion screw positioned between the second premolar and first molar in all models...

BACKGROUND: This study aimed to compare tubular coaxial-NiTi and copper-NiTi orthodontic aligning archwires in terms of teeth alignment, patients' pain perception, and root resorption. SUBJECTS AND METHODS: Orthodontic patients aged 12 years or older, having Little's irregularity index (LII) of 5-9mm were randomly allocated to either the copper-NiTi group or tubular coaxial-NiTi group with a 1:1 allocation ratio. The archwire sequence was 0.014-inch followed by 0...

OBJECTIVE: The aim of this study was to investigate the impact of emodin nanoparticles (n-Emo) on the flexural strength of acrylic resin used in orthodontics. METHODS: A total of 24 acrylic resin discs were prepared according to ISO:20795-1 and divided into four groups (n=6): 0% n-Emo, 0.5% n-Emo, 1% n-Emo, and 2% n-Emo. The flexural strength of each group was measured using the Universal Testing Machine. One-way analysis of variance (ANOVA) and Tukey tests were used to analyse the data...