Journal of Esthetic and Restorative Dentistry

INTRODUCTION: Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode. The objective of this in-vitro study was to evaluate the fracture strength and failure mode of endodontically treated molars, restored with ceramic or hybrid composite monolithic restoration, in the presence of absence of a composite core...

OBJECTIVES: This article presents case reports highlighting over-treatments with resin composites, often misconceived as minimally invasive procedures. CLINICAL CONSIDERATIONS: Tooth-colored restorative materials, such as ceramics and composites, have found widespread application to correct problems related to tooth color, shape, and alignment. When composite resin is used, these procedures can be done in a very conservative, cost-effective, and timely fashion. However, it is noteworthy that contemporary dental esthetic expectations are based on standards propagated by social media and other marketing and communications platforms...

OBJECTIVE: Traditional and modern-day laboratory techniques can be used to mask vital and non-vital discolored teeth. CLINICAL CONSIDERATIONS: Two clinical case reports are presented showing different treatment approaches to differing clinical scenarios of partial coverage veneer and full coverage crown restorations, respectively. CONCLUSIONS: Feldspathic ceramics should be considered when customization of stump shade correction and equalization is required with minimum facial reduction with veneer restorations...

OBJECTIVE: The purpose of this article was to introduce a method for the digital application of three-dimensional (3D) diagnosis and treatment with a virtual articulator and 3D data. CLINICAL CONSIDERATION: With the use of cone-beam computed tomography (CBCT) and intraoral and facial scans, we can create a virtual articulator and evaluate the mandibular position in maximum intercuspation and centric-related occlusion for the patient with an unstable occlusion and temporomandibular disorders (TMD)...

OBJECTIVES: This study aimed to investigate the effect of antioxidant (sodium ascorbate) on tooth sensitivity after two in-office bleaching techniques (light-activated and chemical bleaching). MATERIALS AND METHODS: Ten patients aged 18-25 were bleached in four groups according to bleaching materials and/or antioxidant used. Group A: Maxillary right quadrant received light-activated bleaching with antioxidant. Group B: Maxillary left quadrant received light-activated bleaching without antioxidant...

OBJECTIVES: This laboratory study evaluated the effect of three polishing systems on the surface roughness and gloss of resin composites. MATERIALS AND METHODS: Thirty specimens (6 mm Ø × 8 mm) were fabricated from each of three resin composites: Z 350 XT (nanofill), Harmonize (nanohybrid), and Estelite Omega (supranonofill). All specimens were photopolymerized using a multi-peak LED curing unit (VALO-Standard mode), having a exitance irradiance of approximately 1000 mW/cm2 against a polyester strip (PS)...

OBJECTIVE: This scoping review aims to assess the influence of air abrasion with aluminum oxide and bioactive glass on dentin bond strength. MATERIALS AND METHODS: An electronic search was conducted in three databases (PubMed, Cochrane Library, and Embase), on March 3rd, 2023, with previously identified MeSH Terms. A total of 1023 records were screened. Exclusion criteria include primary teeth, air abrasion of a substrate other than sound dentin, use of particles apart from aluminum oxide or bioactive glass, and studies in which bond strength was not assessed...

OBJECTIVE: This study aims to compare the clinical and radiographic efficacy of Equia system bulk fill glass hybrid material with composite resins in the permanent restoration of pediatric patients' permanent teeth. MATERIALS AND METHODS: The study included 44 pediatric patients aged 8-16 who applied to Necmettin Erbakan University Pediatric Dentistry Department. The groups were formed as symmetrical teeth in the same patient using the split-mouth design. The study included class I caries lesions of 144 permanent teeth...

AIM: When young patients are congenitally missing anterior teeth, different treatment modalities can be used to complement the dental arch. This article proposes a new treatment modality for the replacement of anterior teeth, the cantilever contact-point resin bonded bridge (CCP-RBB). MATERIALS AND METHODS: In this proof of principle study, CCP-RBB's delivered by one operator were clinically assessed. Patients who were missing maxillary incisors and had suitable intra-oral conditions for a contact-point cantilever RBB were included...

OBJECTIVE: To evaluate the optical properties and the relative translucency parameter of Ceramill ZI White (3Y-TZP) and Ceramill Zolid FX White (5Y-PSZ) zirconia ceramic systems and compare them with those of the bovine dentin and enamel/dentin structures. MATERIALS AND METHODS: 3Y-TZP and 5Y-PSZ zirconia ceramic systems were evaluated. A 0.5-mm-thick 3Y-TZP (3Y-NC.5), 0.5-mm-thick (5Y-NC.5), and 1.4-mm-thick (5Y-C.14) were used. A 0.5-mm-thick dentin specimens and 1...

PURPOSE: The objective of the present article was to evaluate the ımpact of dental midline angulation in asymmetrical faces. MATERIALS AND METHODS: A full-portrait image was used to create a set of digitally modified images with a different degree of facial asymmetry, towards the right and the left side of the face respectively. Half of the images were designed with an equivalent angulation of the dental midline in respect to the curve of the lower third of the face and half of them without...

STATEMENT OF PROBLEM: The Vita Toothguide 3D-Master (Vita Zahnfabrik) is considered the dental shade guide in which the three dimensions of color - lightness, hue, and chroma - are most well-ordered in the CIELAB color space. No research has yet explored how well the Vita Toothguide 3D-Master is ordered in the 3D color space by recording color coordinates in vivo. PURPOSE: To evaluate the spatial color distribution of the Vita Toothguide 3D-Master's lightness, chroma, and hue groups and its 26 physical shade tabs...

OBJECTIVE: To develop a comprehensive decision-making tree for evaluating mid-facial peri-implant soft tissue dehiscence in the esthetic zone and provide a systematic approach for assessing various clinical case scenarios, determining appropriate treatment strategies, and considering factors such as the need for soft tissue augmentation, prosthetic changes, or implant removal. CLINICAL CONSIDERATIONS: This clinical decision tree illustrates numerous case scenarios with various esthetic complications around an esthetically compromised, but clinically healthy single implant and provides clinicians with possible solutions as a predictable map for horizontal and vertical soft tissue augmentation in order to manage different clinical circumstances...

OBJECTIVE: To provide technical and clinical recommendations for implementing a digital workflow in Static Computer-Aided Implant Surgery in the anterior maxilla. CLINICAL CONSIDERATIONS: An optimal 3D implant position is crucial for achieving satisfying results in implant rehabilitation in the esthetic area. Due to its complexity, implant placement in the esthetic zone should be executed with precision and predictability. Static Computer-Aided Implant Surgery requires thorough planning and detailed attention to every step of the digital workflow protocol...

OBJECTIVE: This study evaluated the effect of bromelain and propolis extract on the bond strength (BS) of a universal adhesive system to eroded dentin. MATERIALS AND METHODS: Sixty human molars with exposed dentin were halved, with one half protected by composite resin and the other subjected to erosive treatment followed by remineralization. After the erosive treatment, the composite resin was removed, and the teeth were randomly assigned to three groups (n = 20): Adhesive-Control System; Br-10%; Pr-16%...

OBJECTIVE: To explore the feasibility of the usage of digital guides in combination with low- and high-power lasers for the treatment of excessive gingival display, also known as "gummy smile". CLINICAL CONSIDERATIONS: Excessive gingival display due to altered passive eruption can affect patient's perception of their own esthetics and consequently have an impact on self-confidence. Therefore, the management of this condition should offer a predictable and stable long-lasting solution...

OBJECTIVE: Demonstrate the ability of 0.5 mm thickness lithium disilicate laminates associated with resin cement to mask different substrate saturations. METHODS: 60 specimens (n = 5) were prepared with CAD/CAM lithium disilicate glass-ceramic IPS e.max CAD, 0.5 mm thick, in three degrees of translucency (HT, MT and LT); cemented by Variolink Esthetic LC Light+ (L) and Neutral (N) on composite resin substrates A1 and A4 shades. Color measurements were performed by a spectrophotometer (CM-3700d -Konica Minolta)...

OBJECTIVE: To analyze the influence of restoration design (partial-coverage restoration vs. crown) and ceramic layer thickness on the performance and failure loads of CAD/CAM-fabricated lithium disilicate (LDS) reconstructions on molars after fatigue. MATERIALS AND METHODS: Seventy-two posterior monolithic CAD/CAM-fabricated LDS restorations (IPS e.max CAD, Ivoclar Vivadent) with different occlusal/buccal ceramic layer thicknesses (1.5/0.8, 1.0/0.6, and 0.5/0.4 mm) and restoration designs (PCR: non-retentive full-veneer/partial-coverage restoration, C: crown,) were investigated and divided into six groups (n = 12, test: PCR-1...

OBJECTIVE: Orthodontic treatment plays a crucial role in achieving optimal dental esthetics and functional occlusion. However, when periodontally compromised patients are involved, additional precautions and considerations are critical. This article aims to provide up-to-date recommendations for the orthodontic treatment of periodontally compromised patients. CLINICAL CONSIDERATIONS: Comprehensive diagnosis of the patient's periodontal status, inherent malocclusion, and secondary malocclusion resulting from periodontal disease are essential for achieving optimal esthetics and functional occlusion...

OBJECTIVE: Measure and compare the mechanical properties, translucency, and fluoride-releasing capabilities of EQUIA Forte HT against Fuji IX GP and ChemFil Rock. MATERIALS AND METHODS: Ten specimens of each material were fabricated for compressive strength (CS), flexural strength (FS), and surface hardness analysis at 24 h and 7 days. The L*a*b* values were measured against a black-and-white background using a spectrophotometer to analyze the translucency parameter (TP)...