Brazilian Dental Journal

The aim was to evaluate the effect of stress distribution on vertical, horizontal, and oblique forces on the tooth model after reattaching the fragments of the maxillary incisor with vertical root fracture (VRF) using different materials, by 3D finite element analysis (FEA). Tooth with a root canal, spongious, and cortical bone models were designed. VRF was modeled on a tooth with 4 different re-attachment models: Group 1: dual-cure cement (DC)+fiber reinforced composite (FRC), Group 2: DC+polyethylene fiber, Group 3: DC+glass fiber, and Group 4:DC...

This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests...

UNLABELLED: To evaluate the impact of genetic polymorphisms in interleukins (IL1A rs17561, rs1304037; IL10 rs1800871; IL1RN rs9005), nitric oxide (NOS2 rs2779249, rs2897518) and suppressor of cytokine signaling (SOCS1 rs243327, rs33977706) on oral health-related quality of life (OHRQoL) of patients under-going root canal treatment (RCT). METHODS: The sample consisted of 108 participants, presenting single-rooted teeth with asymptomatic periapical periodontitis. The impact of the OHRQoL was recorded using the Oral Health Impact Profile (OHIP-14) before, seven, and 30 days after RCT...

This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD)...

This study verified the effect of surface treatments of the zirconia-reinforced lithium disilicate ceramic bonded to resin cement. Ceramic blocks were divided according to treatments (n=10): FA+SRX (Fluoric acid + silane RX), FA+MDP (Fluoric acid + MDP), FA+SCF+MDP (Fluoric acid + silane CF + MDP), FA+MEP (Fluoric acid + MEP), and MEP (Self-etch primer). Resin cement cylinders were made in the ceramic blocks, photoactivated with 1,200 mW/cm² for 40s, stored in water at 37°C for 24h, and evaluated by the microshear strength test, optical failure descriptive analysis (%), surface characterization (SEM) and contact angle (Goniometer)...

This study assessed the color-matching ability and color recovery of unprepared teeth when using single-shade composites and a universal composite in large restorations. Buccal and palatine surface colors of molars were measured with a spectrophotometer (CIELAB) before preparing round cavities (6 mm in diameter, 2 mm in depth). The cavities were randomly filled with a single-shade composite (Omnichroma, Diamond One, or Vittra APS Unique) or a universal composite (Filtek Universal). Color measurements of the restored cavities were taken, and overall color differences (ΔEab and ΔE00) and differences in the whitening index for dentistry (ΔWID) from baseline were calculated...

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0...

This study verified the effect of the combination of preheated hydrofluoric acid/silane/electric current in the adhesion of the resin cement to ceramic. IPS E.max Press ceramic discs embedded in PVC rigid tubes were divided into four groups associating preheated hydrofluoric acid and silane applied with electrical current (n=10): Ha+S (Heated acid + silane); Ha+S+Ec (Heated acid + silane + electrical current); A+S (Acid + silane) and A+S+Ec (Acid + silano + electrical current). Resin cement/ceramic samples were stored in water at 37°C for 24h...

This split-mouth randomized controlled trial aimed to evaluate the primary and secondary stability of hybrid implants with different thread configurations and hydrophilic surfaces. Twenty patients with a partially edentulous maxilla were selected. These patients received two types of implants with the same hydrophilic surface: CTP group: Cylindrical-Tapered implant with perforating threads; CTH: Cylindrical-Tapered implant with hybrid threads configuration (perforating and condensing threads). The primary and secondary stability parameters were measured by insertion torque and resonance frequency analysis at the time of implant placement and 7, 28, 56, and 90 days after the surgical procedure...

This study investigated microshear bond strength (µSBS) of two (2) dual-cured resin-luting agents (RelyX™ Ultimate and RelyX™ U200) when photoactivated through varying thicknesses of lithium disilicate, with or without thermal cycling. Discs of IPS e.max Press of 0.5, 1.5, and 2 mm in thickness were obtained. Elastomer molds (3.0 mm in thickness) with four cylinder-shaped orifices 1.0 mm in diameter, were placed onto the ceramic surfaces and filled with resin-luting agents. A Mylar strip, glass plate, and load of 250 grams were placed over the filled mold...

This study evaluated the correlation between root canal curvature and the effects of ultrasonic irrigation in the following parameters: volume of uncontrolled dentin removal (UDRVol), maximum depth of dentin defects, removal of accumulated hard tissue debris (AHTD), and canal transportation in prepared curved root canals. Twenty-four human permanent mandibular molars were divided into two groups according to root canal curvature: moderate curvature (MC: mean 25°); and severe curvature (SC: mean 48°)...

The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil)...

This research aimed to evaluate the effect of the radiopacity of a Bulk-Fill composite (X-TraFil, VOCO, Germany) and a Conventional composite (P60, 3M ESPE, USA) and assessment of the margin location in the enamel and dentin on the diagnosis of secondary caries. 76 intact premolars with MOD preparation were divided into two equal groups and filled with the conventional and bulk-fill composite. Four regions were considered to simulate carious lesions (two regions in enamel and two regions in dentin). In each group, half of the regions in the dentin and half in the enamel were randomly selected for secondary caries simulation and filled with a wax-plaster combination while the remaining regions stayed intact...

The objective is to evaluate the effect of different surface treatments and storage on the shear strength of ultratranslucent zirconia. 36 blocks of ultra-translucent zirconia were fabricated (7x7x2mm) and sintered. Then, divided into 12 groups according to the "surface treatment" (C -Primer; Al -Sandblasting with Al2O3 + Primer; Si -Silicate + Primer; Gl -Glaze + HF + Primer; Z -Zirlink; Zp -Zirlink + Primer) and "storage" factors (ST-with 150 days/37º and without). After surface treatment, five cylinders (Ø=2mm; h=2...

High expression of MMP-2 and MMP-9 in periapical lesions plays an important role in the degradation of the extracellular matrix. This study aimed to investigate the effect of epigallocatechin-3-gallate (EGCG)-based endodontic paste as an intracanal dressing on the expression of MMP-2 and MMP-9 in periapical lesions. Periapical lesions were experimentally induced in 35 mature beagle dog premolars randomly divided into healthy teeth, untreated periapical lesions, periapical lesions treated in a single session (control groups), and periapical lesions treated in two sessions with EGCG or calcium hydroxide-based pastes (experimental groups)...

To investigate individual and contextual factors associated with seeking treatment for traumatic dental injuries. A cross-sectional study was conducted with 739 pairs of guardians and children. Guardians answered a questionnaire addressing sociodemographic characteristics, seeking treatment for a tooth injury in the child, and the Oral Health Literacy-Adult Questionnaire. Descriptive analysis and unadjusted and adjusted multilevel Poisson regression analysis (p<0.05). The prevalence of seeking treatment for traumatic dental injury was 44...

This study aimed to evaluate the effects of the application of 10% sodium ascorbate (SA) after in-office bleaching on the penetration of hydrogen peroxide (HP) into the pulp chamber, color change, and microtensile bond strength (µTBS) to the resin-enamel interface. Thirty premolars and thirty molars were randomly divided into three groups (n = 20 each). One group was exposed to deionized water (negative control). The other two groups were bleached with 35% HP in a single session for 3x15 minutes for each application...

This study evaluated the effect of different firing protocols on the surface roughness and flexural strength of CAD/CAM lithium disilicate glass-ceramic (LD) after aging methods. Forty-two LD bars of 16 x 4 x 2 mm (IPS e-max CAD, Ivoclar) were randomly separated into two groups according to firing protocols: Single firing-Staining, glazing, and crystallization in a single step; Multiple firings-Crystallization+First staining+Firing+Second staining+Firing+Glazing+Firing. After protocols, initial surface roughness readings were taken (Surfcorder SE1700, Kosakalab)...

Gels containing juca seed galactomannan (JSG) were evaluated for their potential to prevent the progression of dentin erosive wear in an in vitro study with four experimental groups (n = 9). The treatments included distilled water (DW), 0.05% stannous fluoride (121 ppm F), and 0.5% or 1% JSG. The specimens underwent a cycle (3 times/day) consisting of immersion in 1% citric acid (5 minutes), treatment (5 minutes), and artificial saliva exposure (2 hours/overnight) for 5 days. Surface changes were assessed using mechanical profilometry (wear), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS)...

UNLABELLED: This study evaluated the effect of toothbrushing on enamel-cementing material-ceramic bonded interfaces, using different cementing materials. MATERIALS AND METHODS: Thirty enamel and thirty ceramic blocks were bonded with cementing materials to produce the samples that were bonded with three types of cementing materials: 1- RelyX Ultimate resin cement (REXU), 2- RelyX Unicem 2 self-adhesive resin cement (REU2) and 3- heated Z100 restorative composite (60°C)...